Pratt & Whitney Canada JT15D

The JT15D is a small turbofan engine built by Pratt & Whitney Canada. It was introduced in 1971 at convert|2200|lbf|abbr=on thrust, and has since undergone a series of upgrades to just over convert|3000|lbf|kN|abbr=on thrust in the latest versions. It is the primary powerplant for a wide variety of smaller jet aircraft, notably business jets. Over 6,000 JT15D's have been delivered since the 1970s, with over 30 million hours of operation.

The JT15D is fairly unique among modern turbofans in that it uses a centrifugal compressor as its main high-pressure system. This was a common feature of early jet engines, but was quickly replaced by axial compressors in most roles due to its large frontal size. In the turbofan role most of the jet thrust is generated by the cold air blown past the engine, and the internal "jet" portion is quite small. In this role the high single-stage compression of the centrifugal design has advantages, and the main reason most small turbofans don't use them is that they are often developments of previous turbojet designs.

In the JT15D the fan blows about 70% of the air into the bypass duct, producing most of the overall thrust. On JT15D-4 models and above there is a small "booster" axial stage just behind the fan which is running at the same speed as the fan and directing the remaining 30% of the airflow into the engine core. This air is further compressed by the centrifugal stage, and burned in a reverse-flow annular combustor. The hot gasses flow through a "high-pressure" turbine that drives the centrifugal stage, and then two more turbines driving the fan and booster.

The first model, the JT15D-1, was introduced to power the Cessna Citation I, then known as the Fanjet 500. Deliveries started in 1972, and eventually on 1,417 -1's were delivered. The JT15D-4 was introduced the next year, improving thrust to convert|2500|lbf|abbr=on. The -4 was the primary engine for the Cessna Citation II, and went on to find use on the Mitsubishi Diamond 1A, Aerospatiale Corvette and SIAI Marchetti S.211. Eventually 2,195 engines of the -4 series were delivered.

The next major model was the JT15D-5, certified in 1983. The first versions delivered convert|2900|lbf|abbr=on and were used on the Beechjet 400A and Cessna T-47A. Several minor versions were introduced, the -5A for the Cessna Citation V, while the -5B powered the Beechcraft T-1A "Jayhawk", the -5C the DASA Ranger 2000 and Agusta S211A.

A more major upgrade was the JT15D-5D, which was certified in 1993. It increased thrust again, this time to convert|3045|lbf|abbr=on. The -5D is used on the Cessna UC-35A and Cessna Citation Ultra. More recently the original -5 (apparently) was selected for the VisionAire Vantage, although this aircraft has not entered production. It seems more likely it would be the -5C or -5D.