Geometric phase

Geometric phase

In mechanics (including classical mechanics as well as quantum mechanics), the Geometric phase, or the Pancharatnam-Berry phase (named after S. Pancharatnam and Sir Michael Berry), also known as the Pancharatnam phase or Berry phase, is a phase acquired overthe course of a cycle, when the system is subjected to cyclic adiabatic processes, resulting from the geometrical properties of the parameter space of the Hamiltonian. The phenomenon was first discovered in 1956, [S. Pancharatnam, Proceedings of Indian Acadamic of Science, 44, A, 247 (1956).] and rediscovered in 1984. [M. V. Berry, Proceedings of the Royal Society of London, A, 392, 45 (1984).] It can be seen in the Aharonov-Bohm effect and in the conical intersection of potential energy surfaces. In the case of the Aharonov-Bohm effect, the adiabatic parameter is the magnetic field inside the solenoid, and cyclic means that the difference involved in measuring the effect by interference corresponds to a closed loop, in the usual way (see below). In the case of the conical intersection, the adiabatic parameters are the molecular coordinates. Apart from quantum mechanics, it arises in a variety of other wave systems, such as classical optics. As a rule of thumb, it occurs whenever there are at least two parameters affecting a wave,in the vicinity of some sort of singularity or some sort of hole in the topology.

Waves are characterized by amplitude and phase, and both may vary as a function of those parameters. The Berry phase occurs when both parameters are changed simultaneously but very slowly (adiabatically), and eventually brought back to the initial configuration. In quantum mechanics, this could e.g. involve rotations but also translations of particles, which are apparently undone at the end. Intuitively one expects that the waves in the system return to the initial state, as characterized by the amplitudes and phases (and accounting for the passage of time). However, if the parameter excursions correspond to a cyclic loop instead of a self-retracing back-and-forth variation, then it is possible that the initial and final states differ in their phases. This phase difference is the Berry phase, and its occurrence typically indicates that the system's parameter dependence is singular (undefined) for some combination of parameters.

To measure the Berry phase in a wave system, an interference experiment is required. The Foucault pendulum is an example from classical mechanics that is sometimes used to illustrate the Berry phase. This mechanics analogue of the Berry phase is known as the Hannay angle.

Examples of geometric phases

The Foucault Pendulum

One of the easiest examples is the Foucault pendulum. An easy explanation in terms of geometric phases is given by Frank Wilczek::How does the pendulum precess when it is taken around a general path C? For transport along the equator, the pendulum will not precess. [...] Now if C is made up of geodesic segments, the precession will all come from the angles where the segments of the geodesics meet; the total precession is equal to the net deficit angle which in turn equals the solid angle enclosed by C modulo 2pi. Finally, we can approximate any loop by a sequence of geodesic segments, so the most general result (on or off the surface of the sphere) is that the net precession is equal to the enclosed solid angle.In summary, there are no inertial forces that could make the pendulum precess. Thus the orientation of the pendulum undergoes parallel transport along the path of fixed latitude. By the Gauss-Bonnet theorem the phase shift is given by the enclosed solid angle.

Polarized light in an optical fiber

Imagine linearly polarized light entering a single-mode optical fiber. Suppose the fiber traces out some path in space and the light exits the fiber in the same direction as it entered. Then compare the initial and final polarizations. In semiclassical approximation the fiber functions like a waveguide and the momentum of the light is at all times tangent to the fiber. The polarization can be thought of as an orientation perpendicular to the momentum. As the fiber traces out its path, the momentum vector of the light traces out a path on the sphere in momentum space. The path is closed since initial and final directions of the light coincide, and the polarization is a vector tangent to the sphere. Going to momentum space is equivalent to taking the Gauss map. There are no forces that could make the polarization turn, just the constraint to remain tangent to the sphere. Thus the polarization undergoes parallel transport and the phase shift is given by the enclosed solid angle (times the spin, which in case of light is 1).

ee also

* For the connection to mathematics, see curvature tensor,
* The Aharonov-Bohm effect,
* Conical intersections of potential energy surfaces.

Notes

References

*

* V. Cantoni and L. Mistrangioli (1992) "Three-Point Phase, Symplectic Measure and Berry Phase", "International Journal of Theoretical Physics " vol. 31 p. 937.

* Richard Montgomery, "A Tour of Subriemannian Geometries, Their Geodesics and Applications (Mathematical Surveys and Monographs, Volume 91)", (2002) American Mathematical Society, ISBN 0-8218-1391-9. "(See chapter 13 for a mathematical treatment)"

* Connections to other physical phenomena (such as the Jahn-Teller effect) are discussed here: [http://www.mi.infm.it/manini/berryphase.html]

* Paper by Prof. Galvez at Colgate University, describing Geometric Phase in Optics: [http://departments.colgate.edu/physics/faculty/EGalvez/articles/PreprintRflash.pdf]

* Surya Ganguli, " Fibre Bundles and Gauge Theories in Classical Physics: A Unified Description of Falling Cats, Magnetic Monopoles and Berry's Phase" [http://www.keck.ucsf.edu/~surya/cats.ps]

* Robert Batterman, "Falling Cats, Parallel Parking, and Polarized Light" [http://philsci-archive.pitt.edu/archive/00000794/00/falling-cats.pdf]

* Frank Wilczek and Alfred Shapere, "Geometric Phases in Physics", World Scientific, 1989


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Phase geometrique — Phase géométrique En mécanique quantique, une phase géométrique est un nombre complexe de module unité par lequel est multiplié le vecteur d état (ou la fonction d onde) d un système physique dont on a fait varier un paramètre de façon… …   Wikipédia en Français

  • Phase géométrique — En mécanique quantique, une phase géométrique est un nombre complexe de module unité par lequel est multiplié le vecteur d état (ou la fonction d onde) d un système physique dont on a fait varier un paramètre de façon « adiabatique »[1] …   Wikipédia en Français

  • Geometric stable distribution — Geometric Stable parameters: α ∈ (0,2] stability parameter β ∈ [−1,1] skewness parameter (note that skewness is undefined) λ ∈ (0, ∞) scale parameter μ ∈ (−∞, ∞) location parameter support: x ∈ R, or x ∈ [μ, +∞) if α < 1 and β = 1, or x ∈… …   Wikipedia

  • Geometric dimensioning and tolerancing — (GD T) is a system for defining and communicating engineering tolerances. It uses a symbolic language on engineering drawings and computer generated three dimensional solid models for explicitly describing nominal geometry and its allowable… …   Wikipedia

  • Geometric Art — is a phase of Greek art, characterised largely by geometric motifs in vase painting, that flourished towards the end of the Greek Dark Ages, circa 900 BCE to 800 BCE. Its centre was in Athens, and it was diffused amongst the trading cities of the …   Wikipedia

  • Geometric albedo — The geometric albedo of an astronomical body is the ratio of its actual brightness at zero phase angle (i.e. as seen from the light source) to that of an idealized flat, fully reflecting, diffusively scattering (Lambertian) disk with the same… …   Wikipedia

  • Geometric hashing — In computer science, geometric hashing is a method for efficiently finding two dimensional objects represented by discrete points that have undergone an affine transformation. (Extensions exist to some other object representations and… …   Wikipedia

  • Geometric quantization — In mathematical physics, geometric quantization is a mathematical approach to defining a quantum theory corresponding to a given classical theory. It attempts to carry out quantization, for which there is in general no exact recipe, in such a way …   Wikipedia

  • Phase space — In mathematics and physics, a phase space, introduced by Willard Gibbs in 1901, is a space in which all possible states of a system are represented, with each possible state of the system corresponding to one unique point in the phase space. For… …   Wikipedia

  • Phase-type distribution — Probability distribution name =Phase type type =density pdf cdf parameters =S,; m imes m subgenerator matrixoldsymbol{alpha}, probability row vector support =x in [0; infty)! pdf =oldsymbol{alpha}e^{xS}oldsymbol{S}^{0} See article for details… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”