NZR B class (1874)

NZR B class (1874)
Power type	Steam
Builder	Avonside Engine Co., UK
Build date	1874
Total produced	2
Configuration	0-4-4-0T (Double Fairlie)
Gauge	3 ft 6 in (1,067 mm)
Driver diameter	3 ft 3 in (0.991 m)
Length	31 ft 2 in (9.50 m)
Locomotive weight	28 tons 0 cwt (62,700 lb or 28.4 t)
Fuel capacity	1 tons 14 cwt (3,800 lb or 1.7 t)
Water capacity	750 imp gal (3,400 l; 900 US gal)
Boiler pressure	130 lbf/in² (900 kPa)
Firegrate area	15.0 sq ft (1.39 m2)
Heating surface: Total	770 sq ft (72 m2)
Cylinders	4
Cylinder size	9 × 16 in (229 × 406 mm)
Tractive effort	6,912 lbf (30.75 kN)
Career	NZGR
Number	10, 27
First run	1915
Withdrawn	1890–1896
Disposition	Both scrapped

The NZR B class of 1874 was the first of two steam locomotive classes to be designated as B by the Railways Department that then oversaw New Zealand's national rail network (the second B class was introduced in 1899). Ordered from the Avonside Engine Company in 1874, the locomotives were of the Double Fairlie type and were the first British-built locomotives to feature Walschaerts valve gear. They were not the first Double Fairlies to operate in New Zealand, as the first two members of the E class had commenced operations in 1872.

The first member of the B class, nicknamed Snake, was introduced in September 1874 and it worked in Auckland; it was followed by its partner Lady Mordaunt on 5 April 1875, which was based in Otago. In 1876, the Provinces of New Zealand were abolished and a national locomotive classification method was established, and it first split these locomotives into separate classes. The Auckland based Snake became the sole member of the B class in 1876; Otago locomotives were omitted from the national classification initially, but in 1877, it was necessary to include them as the Main South Line linked the southern provinces. Despite Lady Mordaunt being almost identical to Snake, it was classified as the sole member of the NZR N class as Otago locomotives were classified by an inverse ranking of locomotive weight while all others were classified by cylinder diameter and number of wheels. Both of these methods of allocating classifications quickly proved impractical and were discarded; in 1879, Lady Mordaunt was reclassified as B class like Snake and they bore the classification for the remainder of their working lives.^[1]

The numbers allocated to the locomotives did not stay the same all their lives either. For example, Snake was initially B 10, then B 51, and finally B 238.^[2]

The two Bs proved unpopular with crews and they failed to generate sufficient power, thus leading to their early withdrawal from service.^[3] Snake was retired in 1890 not long after receiving the number of B 238, while Lady Mordaunt lasted another six years.^[2] With both locomotives removed from the Railways Department's books, the B classification was free to be used again in 1899; the N classification was also re-used after it was vacated by Lady Mordaunt, by the N class of 1885.

See also

• Locomotives of New Zealand

References

1. ^ Sean Millar, From A to Y Avoiding I: 125 Years of Railway Motive Power Classification in New Zealand (self-published, 2001, ISBN 0-908726-28-7), 13-14 and 59.
2. ^ ^{a b} New Zealand Railways Steam Locomotives, "B Class 0-4-4-0T Register", accessed 24 January 2008.
3. ^ New Zealand Railways Steam Locomotives, "Class B Double Fairlie 0-4-4-0T", accessed 24 January 2008.