- Pervaporation
Pervaporation is a method for the
separation of mixture s of liquids by partialvaporization through a non-porous or porous membrane.Theory
The name of this membrane-based process is derived from the two basic steps of the process, firstly the permeation through the membrane by the permeate, then its evaporation into the vapor phase. This process is used by a number of industries for several different processes, including purification and analysis, due to its simplicity and
in-line nature.The membrane acts as a selective barrier between the two phases, the liquid phase feed and the vapor phase
permeate . It allows the desired component(s) of the liquid feed to transfer through it byvaporization . Separation of components is based on a difference in transport rate of individual components through the membrane.Typically, the upstream side of the membrane is at ambient pressure and the downstream side is under vacuum to allow the evaporation of the selective component after permeation through the membrane. Driving force for the separation is the difference in the partial pressures of the components on the two sides and not the volatility difference of the components in the feed.
The driving force for transport of different components is provided by a chemical potential difference between the liquid feed/retentate and vapor permeate at each side of the membrane. The retentate is the remainder of the feed leaving the membrane feed chamber, which is not permeated through the membrane. The chemical potential can be expressed in terms of fugacity, given by Raoult's law for a liquid and by Dalton's law for (an ideal) gas. It should be noted that during operation, due to removal of the vapor-phase permeate, the actual fugacity of the vapor is lower than anticipated on basis of the collected (condensed) permeate. Separation of components ("e.g." water and ethanol) is based on a difference in transport rate of individual components through the membrane. This transport mechanism can be described using the solution-diffusion model, based on the rate/ degree of dissolution of a component into the membrane and its velocity of transport (expressed in terms of diffusivity) through the membrane, which will be different for each component and membrane type leading to separation.
Applications
Pervaporation is effective for diluting solutions containing trace or minor amounts of the component to be removed. Based on this,
hydrophilic membranes are used for dehydration of alcohols containing small amounts of water andhydrophobic membranes are used for removal/recovery of trace amounts of organics from aqueuous solutions. Hydrophobic membranes are often PDMS based where the actual separation mechanism is based on the solution-diffusion model described above.A relatively new membrane in the field hydrophylic membranes is the
ceramic membranes with the actual separation layer being made of amorphoussilica . This is in fact a membrane which is porous, with pores ranging around 4 Ångstrøm, large enough to let water molecules pass through and retain any other solvents that have a larger molecular size such as ethanol. Recent novell hydrophylic ceramic membranes can also be based on titania orzirconia .Pervaporations is a very mild process and hence very effective for separation of those mixtures which can not survive the harsh conditions of distillation.
* Solvent Dehydration: dehydrating the ethanol/water and isopropanol/water azeotropes
* Continuous water removal from condensation reactions such asesterification s to enhance conversion and rate of the reaction.
*Membrane introduction mass spectrometry
* Removing organic solvents from industrial waste waters.
* Combination of distillation and pervaporation/vapour permeationRecently, a number of organophilic Pervaporation membranes have been introduced to the market. Organophilic Pervaporation membranes can be used for the separation of organic-organic mxictures, e.g.:
* Reduction of the Aromatics content in refinery streams
* Breaking of Azeotropes
* Purification of extraction media
* Purification of product stream after extraction
* Purification of organic solventsExternal links
* [http://www.membrane-guide.com/membrane_separation/pervaporation/pervaporation_europe.htm www.membrane-guide.com] suppliers, products, news and facts for engineers involved in the design or the operation of pervaporation systems.
* [http://www.mamut.net/pervatechbv/subdet2.htm Technology of pervaporation] Pervaporation with ceramic membranes
* [http://www.epa.gov/nrmrl/std/cppb/pervapor/index.html] Environmental Importance & as a Green Chemistry solution.References
* cite book
last = Fontalvo Alzate
first = Javier
title = Design and performance of two-phase flow pervaporation and hybrid distillation process.
publisher = JWL boekproducties
location=Technische Universiteit Eindhoven, The Netherlands
year = 2006
isbn = 978-90-386-3007-6
* cite book
last = Matuschewski
first = Heike
title = MSE — modified membranes in organophilic pervaporation for aromatics/aliphatics separation.
publisher = Desalination
location=www.desline.com
year = 2008
Wikimedia Foundation. 2010.