Arosaurer

The Arosaurer (also written as Aro Saurer, likely a romanisation of "Allosaurer") is a type of Zoid, a race of mechanical lifeforms from the fictional "Zoids" universe.Zoids
Zoid_name = Arosaurer
ImageName =
Caption = Ciao's Arosaurer
Model_number = RZ-067
Faction = Helic Republic
Zoid_type = Allosaurus
Crew = 1
Weight = 62
Length = 13.7
Height = 10.8
Speed = 170 km/h
Weapons = Twin-Barrelled 105mm Beam Cannon (2), Flamethrower (2), Grappler Claw (2), Hyper Bite Fangs
Equipment = Nothing beyond standard systems

Overview

The Arosaurer is an Allosaurus-type Zoid created by the Helic Republic.

Based on the smaller Godos, the Arosaurer was developed as an alternative to the Command Wolf. While slower than the Wolf, the Zoid was far more heavily armoured and, because of its biped design, more agile and more capable in close combat.

Battle Story appearances

The Arosaurer was developed in the ZAC 2040s to work with the Dibison and Raynos, as escorts to the Madthunder. The Zoid was successful in this role, proving to be a match for the Zenebas Zoids it faced. Following the recapture of the Helic capital, the Zoid was further produced, becoming one of the mainstays of the new Helic Army.

The Zoid served into ZAC 2050s, but was gradually replaced with newer Zoid designs like the Houndsoldier and Godkaiser. All surviving examples of the Arosaurer were wiped out during the Meteor Disaster in ZAC 2056. Following the disaster, the Helic army chose to abandon the design in favour of the Command Wolf and Godos.

Following the destruction of the Helic army in ZAC 2102, the design was recreated by the Republic to replace combat losses. While the design was initially successful against the Neo-Zenebas forces, the design proved to be ineffectual against the Seismosaurus. Most of the Arosaurers were wiped out by the Zenebas forces.

Media appearances

Anime

The Arosaurer's first anime appearance was in "". The Arosaurer was one of the standard Zoids of the Peacekeeping Bureau, piloted by Ciao and other officers. Several other Arosaurers appeared in the series, most notably a modified one used by Jean, a professional Zoid thief.

Manga

An Arosaurer appears in a single frame of the "Chaotic Century" manga. The Zoid has no impact on the storyline; the frame being part of a character's speech on the intelligence and free will normal Zoids possess.

Models

Original Japanese Release

*Assembly required. (Snap-together, no glue needed. Scissors or X-acto knife recommended for trimming off excess plastic bits.)
*The model's colours are moulded into the plastic, and it does not need any paint.

The Arosaurer kit comes on four frames, along with a wind-up motor, a semi-transparent canopy cover, sixteen rubber caps, a small chromed gold pilot, and label sheets. The Arosaurer is moulded in light grey and white, with a smoke-coloured canopy.

The Arosaurer's construction is surprisingly complex for a Zoid of its size, with the legs being particularly involved. The Zoid uses a wind-up motor for its motion; once wound, the Arosaurer will walk forward, waving its arms and opening its jaws.

The Arosaurer was released in Japan in 1987 with production continuing until about 1988. Several other versions of the Arosaurer have been produced. They are detailed below.

Technozoids

A version of the Arosaurer was released under the name of Strike Zilla. The Strike Zilla's colours are similar to the OJR version, with a lighter grey used for the model.

Zoids2

The Arosaurer was also released under the name of Raptor, as part of the "Zoids2" line. The Raptor was recoloured in black, grey, and chrome silver.

New Japanese Release

The Arosaurer was released as part of the New Japanese Release. The Zoid was completely recoloured, with an orange canopy, blue body, light grey limbs and a light blue trim, as well as a grey pilot.

A version of this Zoid was intended for release as a part of the "New American Release". However, the line was cancelled before the Zoid was released.

Fuzors

Because of the Zoid's use in the "Fuzors" anime, a variant of the Arosaurer was released in the supporting model line. Moulded in grey and blue, the mould was changed slightly to accommodate two translucent blue blisters on the shoulders of the Zoid, representing police strobe lights. A custom sticker sheet including Peacekeeping Bureau stickers was included with the model.