Solvent Yellow 124

Chembox new
ImageFile = Solvent Yellow 124.png ImageFile1 =
ImageFile2 =
IUPACName =
OtherNames = SY124
Sudan 455
Somalia Yellow
T10 Yellow LBN
Section1 = Chembox Identifiers
CASNo = 34432-92-3
PubChem =
SMILES = CN(c1ccc(N=Nc2ccccc2) cc1)CCOC(OCC(C)C)C
Section2 = Chembox Properties
Formula =
MolarMass = g/mol
Appearance =
Density =
MeltingPt =
BoilingPt =
Solubility =
Section3 = Chembox Hazards
MainHazards =
FlashPt =
Autoignition =

Solvent Yellow 124 is a yellow azo dye used in European Union as a fuel dye. It is a marker used since August 2002 to distinguish diesel fuel intended for heating from a higher-taxed motor diesel fuel. It is added to fuels not intended for motor vehicles in amounts of 6 mg/l, or 7 mg/kg, under the name Euromarker.

Euromarker

Solvent Yellow 124 is a dye with structure similar to Solvent Yellow 56. This dye can be easily hydrolyzed with acids, splitting off the acetal group responsible for its solubility in nonpolar solvents, and yielding a water-soluble form which is easy to extract to water. Like a similar methyl orange dye, it changes color to red in acidic pH. It can be easily detected in the fuel at levels as low as 0.3 ppm by extraction to a diluted hydrochloric acid, allowing detection of the red diesel added into motor diesel in amounts as low as 2-3%.

Solvent Yellow 124 is intended to be difficult to remove from the fuel in an economical way. The Customs, familiar with various tricks including dual fuel systems with hidden fuel tanks, will take samples from the fuel lines to the engine itself if such equipment is suspected in the car.

As the amount of Solvent Yellow 124 added to the fuel is known, by measuring its content in the fuel it is possible to calculate how much of the low-taxed fuel was added to the legal one.

Concerns

The UK government expressed concerns about the possibility of "laundering" the dye out of "illicit" fuel, hampering the detection. Denmark expressed concerns about the dye's toxicity.

Euromarker is intended to be replaced later by newer technology markers, such as biological markers or fuel markers with non destructive analytical methods. These are all special chemicals tailored for the individual products, and perhaps even for individual refineries, allowing the identification of the source of the material by its content of the molecular markers.

External links