SCSI Log Sense Command

SCSI Log Sense Command

The SCSI Log Sense command is used to obtain current data from log pages in a SCSI target device. The CDB structure for the Log Sense command is:

The special parameter fields in the CDB have the following meaning:

*PPC - Parameter Pointer Control - if this is one then the target returns a log page with parameter code values which have changed since the last Log Select command or Log Sense command. If PPC is zero then all bytes are returned.

*SP - Save Parameters - if this is one then the target should save all saveable log parameters to a non-volatile memory or media area.

*PC - Page Control - this indicates which type of values should be returned:
**00 - Current Threshold Values
**01 - Current Cumulative Values
**10 - Default Threshold Values
**11 - Default Cumulative Values

*Parameter Pointer indicates the first parameter code to be returned.

*Allocation Length in bytes

If the Parameter Pointer is zero and the PPC is zero and the Allocation Length is high enough then all parameters are returned.


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • SCSI log pages — SCSI target devices provide a number of SCSI log pages. These can be interrogated by a Log Sense command and in some cases can be set by a Log Select command. The Log Sense and Log Select commands include a 6 bit address field, allowing for 64… …   Wikipedia

  • SCSI — Small Computer System Interface, or SCSI (pronounced skuh zee [ [http://www.bartleby.com/61/56/S0175650.html SCSI] . American Heritage Dictionary .] [cite book|title=The Book of SCSI|last=Field|pages=1] ), is a set of standards for physically… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”