Towed array sonar

A towed array sonar is a sonar array that is towed behind a submarine or surface ship. It is basically a long cable, up to 2000 m, with hydrophones that is trailed behind the ship when deployed.Fact|date=March 2008 The hydrophones are placed at equal distance on the cable. On the first few hundred meters near the ship's propeller there are usually none since their effectivity would have been reduced by noise and turbulence generated by the propulsion. Surface ships often have the sonar array mounted on a cable which pulls a tow vehicle (an ROV - see Surveillance Towed Array Sensor System) behind the mother ship, or on another cable which trails from the ROV connector. By changing the ROV's depth, the sensor can be deployed in different thermal layers.

The array's hydrophones can be used to detect sound sources, but the real value of the array is that the signal processing technique of beamforming and interferometry can be used to calculate the distance and the direction of a sound source. For this, the relative position of the hydrophones need to be known, usually this is only guaranteed when the cable of the array forms a line. Therefore a ship or submarine using a towed array will have to travel straight (and level), or else any change of course will disturb the array and reduce its effectiveness. Also it has to reduce its speed because of the hydrodynamic drag might tear the cable - this can also happen if the array makes contact with the seafloor or the submarine operates astern propulsion.

Despite all those disadvantages, a towed array is useful since it offers better resolution and range compared to a hull mounted sonar and it covers the baffles, the blind spot of hull mounted sonar.Fact|date=March 2008

See also

*Sonar
*Aperture synthesis
*Synthetic aperture sonar
*Phased array
*Surveillance Towed Array Sensor System (SURTASS)