Foxer

Foxer, was the codename for a British built acoustic decoy, used to confuse German acoustic homing torpedoes like the G7es torpedo during the Second World War. A US version codenamed FXR was deployed in 1943. A Canadian version was also built called the CAT (Counter-Acoustic Torpedo). It was replaced in US service by the Fanfare noisemaker.

The device consisted of one or two noise making devices towed several hundred meters behind the ship. The noise makers mechanically generated huge amounts of noise, far more than produced by the ship itself. This noise seduced the simple guidance mechanisms of acoustic torpedoes away from the rear of the ship into a circling pattern around the noise maker until the torpedo ran out of fuel.

Development

By 1943 Allied intelligence sources indicated that Germany had produced a passive acoustic homing torpedo, which homed on the sound produced by a ship propeller as it moved through the water. To counter this threat various countermeasures were considered. There was already a towed noise maker developed to mine-sweep for acoustic mines, this consisted of two steel bars fixed parallel, with a gap between them to allow water to flow between, and towed perpendicular to the flow of water. The water flowing between the two bars caused them to flex and bang together generating far more noise than the towing ship above 1kHz. This noisemaker produced around 20 decibels more noise than the towing ship, and would last for around 25 hours when towed at 12 knots.

The US developed this existing noise-maker into the FXR, which was to be towed singly around 500 feet behind the ship. This entered production by July 1943. The single noise-maker however would only work effectively if the torpedo was equally sensitive to sounds from both the front and rear. If a torpedo it passed directly over the noise-maker from the rear the ship itself would be directly ahead, if the torpedo had a reduced sensitivity to noise from behind, it might ignore the greater output from the noise-maker, and proceed to home on the ship.

After successful attacks on ships in the Convoys ONS 18 and ON 22 in which nine ships were sunk, more detailed studies were begun into the torpedo behaviour. These studies revealed that against a torpedo with reduced sensitivity to the rear (described by its sensitivity pattern as a Cosθ torpedo), a single towed noise-maker would not be sufficiently effective.

Description

The Foxer consisted of one or more 3,000 lb (1,360 kg) arrangements of hollow metal pipes with holes cut in them. These were towed through the water about 200 meters behind the boat. The water rushing through the holes and the pipes banging together created cavitation noise, much greater than that coming from the ships propeller. This worked because the German homing torpedoes were tuned to home in on the sound frequencies generated by cavitation, and further home in on the loudest cavitation sound.

The Germans U-boat crews called it the "circular saw" or "Rattatelboje" (an onomatopoeic word meaning "rattle buoy"), estimated the volume of noise generated by Foxer at 10 to 100 times greater than that generated by a ship.

The limitations of the system were that it could not be towed faster than 14 knots (26 km/h) and because of the noise it effectively rendered the towing ship's sonar useless. The drums also wore out quickly and the sound could be heard underwater over a long distance giving away the position of the towing ship to U-boats searching for convoys.

In the closing stages of the war the Germans developed the T11 "Zaunkoenig II". It was designed to ignore towed decoys and noisemakers. However, it was never fired.

External links

* http://www.de220.com/Armament/Decoys/Decoys.htm
* http://stonebooks.com/archives/030202.shtml

References

*