Turbo dispatch

Turbo Dispatch is a public domain standard for the electronic transfer of job details, initially using packet radio, but now also using the Internet. It is used throughout the United Kingdom to pass the details of stranded motorists between all the major UK motoring organisations and their 500 plus Vehicle Recovery agents. In many cases it is also used by the Vehicle Recovery agent, to pass the details to the attending recovery vehicle. . It is intended that this standard will continue to be developed by the industry to meet its changing needs.

History

On 30 June 1994, a group of representatives from the UK seven major motoring organisations and the Institute of Vehicle Recovery, were invited a meeting at [Brooklands Museum] . Brooklands Museum was chosen as the venue because the meetings chairman Andy Lambert was a volunteer at the Museum and could show people over the aircraft he had recovered there. He clearly hoped that this would be enough incentive to get ‘the clubs’ to sit-down in the same room together. It soon emerged that it was a shared dream of all those present, that ‘common standards’ for all aspects of vehicle recovery, could be introduced to the industry. Amongst other things, this group laid the foundations of Turbo Dispatch project.

Because of the reliability of delivery needed it was decide that Mobitex should be used. In the UK kingdom there was only one provider of Mobitex, this is today a subsidiary of BT (British Telecom) called Transcomm, but at the start of the project it was called RAM Data. Note this is why many user still refer to RAMing jobs. Motor Trade Software's (MTS) Ian Lane designed and wrote the protocols along with the gateway software. Much pioneering work was carried out during early 1995. In the autumn of 1995 Green Flag and Delta Rescue were the first Motoring Organisations to start experimenting with Transmissions to the Garages, with the first genuine Job being sent to Southbank Garage at the end of the year.

The point where most Recovery Operators learned about Turbo Dispatch, was during AVRO EX 1996. Despite it being Green Flags 25th Anniversary, the Motoring Organisation set up a mini ‘Control Room’ at the show and let people see for the first time, just how well the system worked. By the end of that year the The Automobile Association has set up a trial in London, sending jobs to selected Recovery Operators.

Towards the end of 1997, the AA's Evan Anderson became greatly involved in promoting the concept of Turbo Dispatch within the AA. This was undoubtedly the turning point, because Evan seemed to accept that although MTS and RAM did have a monopoly, it was not an intentional one. Anyone else could develop a system, but quite simply nobody else had successfully done so.

In the following year, the RAC went live and by the end of the year, all the ‘major players’ in the industry had adopted Turbo Dispatch. By the year 2005 it is estimated that around 92% of the 4 million ‘garaged’ breakdowns a year, are sent to Recovery Operators using Turbo Dispatch.

The system is clearly popular with the Motoring Organisations, because of the saving in job dispatcher talking on the telephone, to the Recovery Operators. What surprised a lot of people was how popular it was with the operators as well, mainly for the same reasons. A busy control does not want to take job details over the telephone, at least not when he can have it appear on his computer screen. Because he could then use the same system to dispatch the job to his driver, it meant the whole process can be handled in seconds.

Technical review

The following notes describe the method of automatically transferring job details from a motoring organisation (or club’s) computer into their Recovery Operators computer using the Mobitex data network. Since each of the Motoring Organisations is likely to have its own unique computer system and working practices, it is not practical to attempt to define how automatic job transfer would be best achieved for them. Consequently only a typical Recovery Operator’s computer installation is defined below.

Typically, the Recovery Operator job logging and invoicing system is based around an IBM PC compatible. This will be connected to the Mobitex data network by a Masc. Radio Modem (sometimes called a Mobidem) using one of the PC's RS232C communication ports. Job transmission will entail the Motoring Organisations computer using the Recovery Operator unique Mobidem number to call his computer.

Once a connection has been made the job details are transmitted in the data format defined in the Turbo Dispatch Format Manual, and the call terminated. A dedicated communications computer will usually be employed to constantly monitor the Radio Modem via the RS232 port. This will operate a program TD.EXE, running under Windows 98 or later. Data received from the Radio Modem will be transferred to an incoming message queue on the other computer, for subsequent automatic processing by the main job taking software (a maximum of 5 seconds delay). An audible sound will also be generated by the communications computer.

Immediately the job details are received by the Recovery Operator’s communications computer, it will transmit an automatic acknowledgement to the origin of the job message and place the job details in a queue awaiting manual acceptance by the Recovery Operator’s controller. Job Dispatch will be completed by the Recovery Operator’s controller, either by accepting, or rejecting the job and the corresponding transaction being dispatched to the Motoring Organisation.

The Turbo Dispatch application was initially restricted to employing the MASC protocol of the Transcomm Mobile Data Network. This Protocol was adopted because it eliminates the complexity of retries which would result from employing a session based protocol on the radio modems e.g. Hayes or X28

Control

The Turbo Dispatch Standards Group used to meet on average two or three times a year. Sadly no one can be bothered to attend anymore. Its brief was to “Maintain a common standard for message and data formats to be used in electronic data communications between Host Computers and, or Data Terminals. In fixed, mobile environment”.

The picture on the right was taken in 2006 at a meeting in BT Transcomm's Heathrow headquarters (click on it to enlarge). All major Motoring Organisations send representatives and number of selected Recover Operators also attend. All changes and additions to the standard are discussed and have to be agreed by those present at the meeting. As there is little commercial advantage to any organisation (an improvement for one will normally also benefit the others), there is usually a large amount of agreement. Copies of the standard are available from [http://www.laserbyte.com MTT] or public domain sources.

Bibliography

* Professional Recovery, December 2001, Partnership Publications
* Vehicle Recovery Link, May 1999, R K Solutions.
* The World History of the Towing and Recovery Industry, John Hawkins, TT Publications Inc.
* The Motoring Century (the story of the RAC), Piers Brendon, 1997 Bloomsbury Publishing Plc.
* Breakdown Doctor, Fred Henderson, 2005, Reading Room Publishing.

ee also

* Vehicle recovery

External links

[http://www.vehiclerecovery.org/history/index.htm UK Vehicle Recovery History]

[http://www.internationaltowingmuseum.org/ International Towing and Recovery Hall of Fame and Museum]