Sgurr an Utha and Fraoch-bheinn

Sgurr an Utha and Fraoch-bheinn

Infobox_british_hills_double | hill_name= Sgurr an Utha and Fraoch-bheinn


summit1=Sgurr an Utha |translation1=Peak of the udder| language1=(Gaelic) | height1_m=796 | height1_ft=2610| rel_ht1="c." 501 | grid_ref1=NM889838 | maps1=40 | listing1=Corbett, Marilyn |pro1=/sgʌ:ɹ æn uhə/
summit2=Fraoch-bheinn|translation2=Heather hill| language2=(Gaelic) | height2_m=790| height2_ft=2596| rel_ht2=55 | grid_ref2=NM893837 | maps2=40| listing2="(none)" |pro2=/fɹuəxvɛn/

Sgurr an Utha and Fraoch-bheinn are two hills above Glenfinnan, in Lochaber, Highland, Scotland. The two summits are joined by a summit ridge, which is 735 m above sea level at its lowest elevation. The glen of Glen Finnan itself lies just to the east.

This is the only known site in the British Isles for the arctic plant "Diapensia lapponica", first discovered there in 1951.

The hills are most commonly climbed from Glen Finnan to the south. One possible route initially follows a track at the bottom of the Allt an Utha which leaves the A830 road about 2.5 km west of Glenfinnan station to first ascend Sgurr an Utha. A circular route may be made by continuing south from the summit of Fraoch-bheinn, eventually picking up the track on the slopes of Druim na Brein Choille, Fraoch-bheinn's southern ridge.

Alternative routes include a direct ascent of Fraoch-bheinn from Glenfinnan station, or by climbing to the low point between the two summits from the Caol-ghleann, the valley to the north side of the hill. Caol-ghlean curves round to meet Glen Finnan near the station, thus a circular route can be made by walkers using rail to access the area.

External links

* [http://www.andyfellwalker.com/Egg/Sgurr_an_Utha/index.htm Photographs of Sgurr an Utha]


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Diapensia — Scientific classification Kingdom: Plantae (unranked) …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”