Focke-Wulf Ta 154

The Focke-Wulf Ta 154 "Moskito" was a fast two-engine German night fighter aircraft designed by Kurt Tank and produced by Focke-Wulf late in World War II. Only a few were produced and proved to have less impressive performance than the prototypes.

Development

Kurt Tank's team at Focke-Wulf had been working for some time on a fast attack bomber aircraft called the Ta 211, so named because it planned to use an uprated Jumo 211R engine. The plane was a high-wing twin-engine design that bears a strong resemblance to the US Grumman F7F "Tigercat", and was built primarily of plywood bonded with a special glue called Tego-Film. The only large-scale use of metal was in the pressurized cockpit. The airplane used retractable tricycle landing gear. The inverted V-12 engines were mounted in nacelles on the wing leading edges. They drove three-blade controllable propellers.

In August 1942 the RLM (the German Air Ministry) asked for designs to meet a need for a dedicated night-fighter, and the competition quickly boiled down to the Heinkel He 219 and an adapted version of the Ta 211 called the Ta 154. Fifteen prototypes of each were ordered for further testing. Throughout the contest the RLM generally favored the 219 due to its better visibility and range. They also seemed to be suspicious of the 154's wooden construction. In 1942 the Messerschmitt Me 210 should have been the only plane considered, but it was suffering significant development problems and was ignored.

It was at about this time that the light and very fast de Havilland Mosquito, also made of wood, arrived over Germany. It quickly racked up an impressive record; in its first 600 bombing missions only one was shot down, compared to an average of 5% Fact|date=July 2008 for heavy bombers. Erhard Milch personally requested a purpose-built German answer, and selected the 154. Infighting within German circles started almost immediately, because the RLM and nightfighter units still wanted the He 219. Milch took this personally, and spent the better part of the next two years trying to have the 219 program terminated.

Flight tests

Development of the Ta 154 was already well advanced, and the first prototype V1 with Jumo 211F engines flew on July 1, 1943. It was followed by V2 with Jumo 211N engines, which was kept at the factory for handling trials. V1 was then sent to Rechlin-Lärz Airfield for fly-off testing against the 219 and the new Junkers Ju 388. There the 154 reached almost 700 km/h and easily outflew the other two planes, but those were both fully armed and were equipped with radar.

The first armed version of the Ta 154 was the V3, which also was the first to fit the Jumo 211R engines. The added weight of the guns and drag of the radar antennas slowed the plane by a full 75 km/h, although it was still somewhat faster than the 219. The rest of the 15 prototypes were then delivered as A-0 models, identical to V3. Some of these also included a raised canopy for better vision to the rear.

It quickly became clear that the Jumo 211R would not be available any time soon, if at all. Future production turned to the more powerful Jumo 213A, but this was also suffering from long delays. The 154 program spent most of the next year testing various prototypes, and sent many of the A-0s to "Erprobungskommando 154". During these tests the plane showed an alarming tendency to break its landing gear, and about half of the V series were lost this way.

By June 1944 the Jumo 213 was finally arriving in some numbers, and a production run of 154 A-1s were completed with these engines. Just prior to delivery the only factory making Tego-Film, in Wuppertal, was bombed out by the Royal Air Force, and the plywood glue had to be replaced by one that was not as strong, and was later found to react chemically, apparently in a corrosive manner, with the wood in the Ta 154's structure. In July several A-1s crashed with wing failure due to plywood delamination. This same problem also critically affected the Heinkel He 162 "Spatz", Ernst Heinkel's "Volksjäger" jet fighter program entry.

Tank halted production in August, and the RLM eventually cancelled the entire project in September (Milch had been removed by then). At that time about 50 production aircraftt had been completed, and a number of the A-0 pre-production planes were later modified to the production standard. Some of the planes served with NJG 3, and a few were later used as training aircraft for jet pilots.

The designation A-2/U3 was given to six A-0s converted into Mistel composite aircraft.

pecifications (Ta 154 A-1)

aircraft specification

plane or copter?=plane
jet or prop?=prop
crew=2
length main=12.55 m
length alt=40 ft 3¼ in
span main=16.30 m
span alt=52 ft 5¼ in
height main=3.60 m
height alt=11 ft 4 in
area main=31.40 m²
area alt=333.7 ft²
empty weight main=6,600 kg
empty weight alt=15,000 lb
loaded weight main=
loaded weight alt=
max takeoff weight main=9,950 kg
max takeoff weight alt=21,900 lb
engine (prop)=Junkers Jumo 211N
type of prop=liquid-cooled V12 engine
number of props=2
power main=1,500 hp
power alt=1,120 kW
max speed main=615 km/h
max speed alt=332 knots, 404 mph
range main=1,400 km
range alt=760 nm, 870 mi
ceiling main=9,500 m
ceiling alt=31,000 ft
climb rate main=15 m/s
climb rate alt=2,800 ft/min
loading main=
loading alt=
power/mass main=
power/mass alt=
more performance=
armament=
* 2× 20 mm (0.787 in) MG 151 cannon
* 2× 30 mm (1.18 in) nose-mounted MK 108 cannon
* 2× 30 mm fuselage-mounted MK 108 cannon, Schräge Musik
avionics=

References

* [http://www.angelfire.com/oh3/pmodels/ta154.html Picture and specifications of Ta 154]

ee also

aircontent

related=
* Focke-Wulf Ta 211

similar aircraft=
* de Havilland Mosquito
* F7F Tigercat
* Heinkel He 219

lists=
* List of World War II military aircraft of Germany
* List of military aircraft of Germany
* List of WW2 Luftwaffe aircraft prototype projects

see also=