- Mullard SAA5050
-
The Mullard SAA5050 was a character generator chip for implementing the teletext character set. The SAA5050 was used in teletext-equipped television sets, viewdata terminals, and microcomputers, most notably the Philips P2000T homecomputer (1980), Acorn's System 2 (1980), and the BBC micro's teletext-compatible 'Mode 7' display mode (1982). This chip was also manufactured by Philips (now NXP Semiconductors) and Signetics.
The chip generated appropriate video output for a 7-bit input character code representing the current character on the text line, while keeping track of the effect of any of the various control characters defined by the teletext standard that had previously occurred in that text line, which could be used to change the foreground and background colour, switch to or from the alternate block graphics character set, or various other effects.
Full-screen resolution generated by the SAA5050 was 480×500 pixels, corresponding to 40×25 characters. Each character position therefore corresponded to a 12×20 pixel space. Internally each character shape was defined on a 5×9 pixel grid. This was then interpolated by smoothing diagonals to give a 10×18 pixel character, with a characteristically angular shape, surrounded to the top and to the left by two pixels of blank space. This gave a particularly stable and flicker-free arrangement on interlaced displays. The alternate set of 2×3 block graphic characters were created on the same 12×20 pixel grid, so that the top two blocks were each 6×6 pixels, the middle two blocks each 6×8 pixels, and the bottom two blocks again 6×6 pixels (or two fewer in each direction, if the "separated graphics" control character had been sent).
One curiosity, compared to other alternative chips, was that the SAA5050 implemented the original 1976 teletext standard, which had no provision to set black for the foreground text colour. Some alternative chips at the time did allow this, as became formalised in the 1981 CEPT videotex standard.
In addition to the UK version, several variants of the chip existed with slightly different character sets for particular localizations and/or languages. These had part numbers SAA5051 (German), SAA5052 (Swedish), SAA5053 (Italian), SAA5054 (Belgian), SAA5055 (U.S. ASCII), SAA5056 (Hebrew) and SAA5057 (Cyrillic).
The SAA5050 was later superseded by the SAA5243, a similar teletext video generator chip, not only a character generator but a complete stand alone video generator, controlled through I²C.
External links
- SAA5050 data sheet
- Bedstead, a font inspired by the SAA5050 character shapes
Categories:- Teletext
- Graphics chips
Wikimedia Foundation. 2010.