- Motorola phone AT commands
-
AT commands are used to control modems to do their specified functions. Cellular phones are not much different from the old dial-up modems that are still found in many computers. This article focuses on the Motorola RAZR V3m from Verizon and the AT commands that this phone supports and their functions. Other Motorola phones, such as the Motorola ROKR Z6m, also support some of these commands.
All of these commands are well-documented officially on the MOTODEV site, which requires registration. Though the material applies specifically to the G24, some are also relevant to other Motorola products (both GSM and CDMA).
Commands that start with AT+C are well-documented in the 3GPP standard TS 07.07 "AT Command set for GSM Mobile Equipment (ME)", which is also an ETSI standard and can be retrieved via their publications page.
Commands starting with AT+M are likely to be Motorola extensions.
AT Command Response from Phone Description of command AT+GMM +GMM: Motorola CDMA V3c Rev2 Phone Display phone model information AT+MODE? +MODE: 0 Display current phone mode AT+MODE=0 OK Put phone in Modem Mode AT+MODE=2 +MBAN: Copyright 2000-2004 Motorola, Inc. Put phone in Phonebook Mode. On some models, for instance the ROKR Z6m, this allows voice dialing and SMS messages to be sent. AT+MODE=8 OK On some P2K or P2K05 phones, puts the phone into P2K mode. This causes the current serial connection to the phone to be closed. The phone can be returned to the Modem mode by reconnecting it. AT+MODE=24 No response Put phone in USB mass storage mode. On some models, for instance the ROKR Z6m, this allows using the phone as a USB key. From MODE:2, an AT+CLAC command shows the following valid commands: AT+CLAC
AT Command Response from Phone Decscription of command AT+CIND? +CIND: 1,1,0,0,5,0,0 Shows current Cell Indicator status AT+CIND=? +CIND: ("Voice Mail",(0,1)),("service",(0,1)),("call",(0,1)),("Roam",(0-2)),("signal",(0-5)),("callsetup",(0-3)),("smsfull",(0,1)) Sets current Cell Indicator status AT+CKPD ? ? AT+CMER=? +CMER: (0,3),(0,1,2),(0),(0,1,2),(0) Default Value: +CMER: 0,0,0,0,0 AT+CMUT=? +CMUT: (0,1) Default Value: +CMUT: 0 AT+COLP? +COLP: 0 Does not appear to be a settable parameter AT+MAFVL? +MAFVL: 0 Does not appear to be a settable parameter AT+MAPC ERROR AT+MAPS=? +MAPS: (0-2),(0-1) +MAPS: 0,0 +MAPS: 1,0 +MAPS: 2,0
AT+MAPTH ? AT+MARD ? AT+MARS ? AT+MASS ? AT+MAVL ? AT+MCHS ? AT+MCST ? AT+MDBAD ? AT+MDBL ? AT+MDBR ? AT+MDBW ? AT+MDBWE ? AT+MEGA ? AT+MFLEX ? AT+MGCB ? AT+MHCS ? AT+MHFP ? AT+MHIG ? AT+MHMN ? AT+MKPD ? AT+MLCK ? AT+MLKC ? AT+MMCR ? AT+MMDL ? AT+MMRR ? AT+MMTC ? AT+MOON ? AT+MPBF ? AT+MPBR ? AT+MPBRE ? AT+MPBW ? AT+MPBWE ? AT+MPGR ? AT+MPGW ? AT+MPIN ? AT+MRTONE ? Set Ringtone AT+MSCRN ? Set ScreenSaver AT+MSEEM ? AT+MSSI ? AT+MSYN ? AT+MUPB ? AT+MVMN ? AT+MWALL ? Set Wallpaper ATA ? Answer an Incoming call ATD ? dial a number (ie ATD+12125551212;) add semi-colon at end to signify voice call, otherwise data call ATDL ? Last dailled number ATDV ? ATE ? ATE0 - echo off, ATE1 - echo on ATH ? Hang up the call ATQ ? ATV ? ATX ? ATS ? AT+CBC +CBC: 1,60 (1 = connect to external power, 60 = battery charge percentage Battery Charge AT+CCLK +CCLK: "09/10/15,19:33:42+00" Set/read real-time Clock AT+CCWA ? Call Waiting AT+CGMI +CGMI: "Motorola CE, Copyright 2000" Request manufacturer identification AT+CGMM +CGMM: "GSM900","GSM1800","GSM1900","GSM850","MODEL=V635" Request model identification AT+CGMR +CGMR: "R474_G_08.48.4BR.8_RG" Request revision identification AT+CGSMS ? Select service for MO SMS messages AT+CGSN +CGSN: IMEI123456789012345 Return the IMEI of the mobile device AT+CHUP ? Hangup call AT+CHV ? AT+CLAC ? List all supported AT commands AT+CLIP ? Calling line identification presentation AT+CLIR ? AT+CMEE? +CMEE: 0 Report Mobile Termination error AT+CMGD Delete SMS at a given index AT+CMGF=? +CMGF: (1) AT+CMGF? +CMGF: 1 AT+CMGL=? +CMGL: ("REC UNREAD", "REC READ", "STO UNSENT", "STO SENT", "ALL") Similar to AT+MMGL but without the "header only" option AT+CMGR ? Return a single SMS message AT+CMGW +CMGW: number (C350) Send a single SMS message. The command format is: AT+CMGW="phonenumber"\n > Type your message here.\z
AT+MMGW ? AT+CMGS +CMGS: number Send a single SMS message. The command format is: AT+CMGS="phonenumber"\n > Type your message here.\z
AT+CMSS ? AT+CNMA ? AT+CNMI ? AT+CNUM +CNUM: ,"2035551212",129
Get Own phone number associated with phone. AT+CPBF ? Find phonebook entries AT+CPBR ? Read phonebook entries AT+CPBS ? Select phonebook memory storage AT+CPBW ? Write a phonebook entry AT+CPIN ? Enter PIN AT+CPMS +CPMS: "SM",6,20,"SM",6,20,"SM",6,20 Get SMS memory status AT+CRC ? Cellular result codes AT+CREG ? Network registration AT+CSCA ? AT+CSCS ? Select TE character set AT+CSDH ? AT+CSMS ? AT+CVHU ? Voice Hangup Control AT+FMI ? AT+FMM ? AT+FMR ? AT+GMI ? Request Manufacturer identification AT+GMM ? Request Model identification AT+GMR ? Request Revision identification AT+MAID ? AT+MAPV ? AT+MDN ? AT+MMAR ? AT+MMGL=? +MMGL: ("REC UNREAD", "REC READ", "STO UNSENT", "STO SENT", "ALL", "HEADER ONLY") Used for sending and receiving text messages AT+MMGR ? AT+MODE ? AT+MPBFN ? AT+MPBSC ? AT+MPBSCS ? AT+MPBVR ? AT+MPBVW ? AT+MPDPM ? AT+VTD ? AT+VTS ? Send DTFM External links and References
- CDMA Development Group
- AT Commands For CDMA Wireless Modems Reference Guide
- CDMA / IS-95 / IS-707 / cdma2000 Resource Center
- ETSI Standard TS 07 07 - AT command set for GSM Mobile Equipment
- Comparison chart of AT commands of GSM devices
- MotoDev Help
- MotoDev Developers Guids
- Extended AT Command Set
- Motorola Command Set
See also
- Command and Data modes (modem)
- Hayes command set
- AT compatible mobile phones
Categories:- Modems
- Motorola
- Motorola mobile phones
Wikimedia Foundation. 2010.