Direct tension indicator

Direct tension indicator

Direct Tension Indicators, or DTIs, are single use mechanical load cells used to illustrate when adequate tension has been achieved in structural fastener assemblies.[1] The Standard for DTIs in North America is the ASTM International series of standards and the specific designation for testing and manufacturing DTIs is ASTM F959; Standard Specification for Compressible-Washer Type Direct Tension Indicators for Use with Structural Fasteners.[2] DTIs are generally installed in accordance with the Research Council on Structural Connections Specification (RCSC) Specification for Structural Joints using High Strength Bolts[3]. The RCSC Specification has been adopted, in its entirety, by the American Institute of Steel Construction (AISC) and appears as section 16 of that organization's Steel Construction Manual. DTIs within the RCSC Specification section 8.2.4 are described thusly, "ASTM F959 direct tension indicators are recognized in this Specification as a bolt-tension-indicating device. Direct tension indicators are hardened [(see heat treating)], washer shaped devices incorporating small arch-like protrusions on the bearing surface that are designed to deform in a controlled manner when subjected to compressive load."[4]

Regarding the ASTM F959 manufacturing specification, the Abstract from the ASTM website describe DTIs as "capable of indicating the achievement of a specified minimum bolt tension in a structural bolt and are intended for installation under either a bolt head or a hardened washer. Steel materials used in the manufacture of direct tension indicators shall be designed, processed, heat treated, and protectively coated as specified. The direct tension indicators shall conform to required chemical composition, compression load, and dimensional values."[5]

Like other fastener components, DTIs are covered by the Fastener Quality Act of 1999 in Section 3. DEFINITIONs (6)[6] where a DTI is described as "a load-indicating washer, that is through-hardened..." (see heat treating).

DTIs are a function of induced tension. As a fastener assembly is tightened, the arch-like protrusions are compressed and the change in distance between the base of the protrusions of the DTI washer and the protrusion apex, correlates to a value of tensile force induced into the fastener. This distance can be verified by insertion of a tapered feeler gage between the protrusions to the bolt shank. The number of instances the bolt shank can be reached by the feeler gage is then compared to either the results of a pre-installation verification procedure or the manufacturer's instructions.

A subset of the standard DTIs described above, is the "Squirter" type DTI that contains a small amount of material in the cavity of each protrusion. "Squirter" type DTIs are mechanically and metallurgically identical to the standard DTIs described above, except as the protrusions of Squirter type DTIs collapse upon tightening, the cavity material is expelled to the outer diameter of the device indicating protrusion compression, i.e. bolt tension, visually.[7] The "squirting" feature of these types of DTIs is covered by ASME 18.2.6-2010.

References

  1. ^ Kulak, Geoffrey L.; Fisher, Struik (1987). Guide to Design Criteria for Bolted and Riveted Joints (Second ed.). New York: Wiley-Interscience. p. 59. ISBN 978-0471837916. 
  2. ^ Standard Specification for Compressible-Washer Type Direct Tension Indicators for Use with Structural Fasteners. ASTM. http://www.astm.org/Standards/F959.htm. 
  3. ^ Specification for Structural Joints Using High-Strength Bolts. Research Council on Structural Connections. 2009. http://www.boltcoucil.org. 
  4. ^ Specification for Structural Joints Using High-Strength Bolts. Research Council on Structural Connections. 2009. pp. 57. 
  5. ^ "ASTM F959 Abstract". ASTM. http://www.astm.org/Standards/F959.htm. Retrieved 2009. 
  6. ^ fqa 1999. "Fastener Quality Act of 1999". http://ts.nist.gov/WeightsAndMeasures/fqaregs2.cfm. 
  7. ^ Bickford, John (2008). Introduction to the Design and Behavior of Bolted Joints. Boca Raton, FL: CRC Press. pp. 207. ISBN 0-8493-817-2. 

Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • DTI — may refer to: Debt to income ratio Deep trench isolation Defense Technology Institute, the Thai defense technology public organisation Department of Trade and Industry, a government department in several countries Detroit, Toledo and Ironton… …   Wikipedia

  • Hang gliding — Hang glider launching from Mount Tamalpais …   Wikipedia

  • Economic Affairs — ▪ 2006 Introduction In 2005 rising U.S. deficits, tight monetary policies, and higher oil prices triggered by hurricane damage in the Gulf of Mexico were moderating influences on the world economy and on U.S. stock markets, but some other… …   Universalium

  • china — /chuy neuh/, n. 1. a translucent ceramic material, biscuit fired at a high temperature, its glaze fired at a low temperature. 2. any porcelain ware. 3. plates, cups, saucers, etc., collectively. 4. figurines made of porcelain or ceramic material …   Universalium

  • China — /chuy neuh/, n. 1. People s Republic of, a country in E Asia. 1,221,591,778; 3,691,502 sq. mi. (9,560,990 sq. km). Cap.: Beijing. 2. Republic of. Also called Nationalist China. a republic consisting mainly of the island of Taiwan off the SE coast …   Universalium

  • analysis — /euh nal euh sis/, n., pl. analyses / seez /. 1. the separating of any material or abstract entity into its constituent elements (opposed to synthesis). 2. this process as a method of studying the nature of something or of determining its… …   Universalium

  • japan — japanner, n. /jeuh pan /, n., adj., v., japanned, japanning. n. 1. any of various hard, durable, black varnishes, originally from Japan, for coating wood, metal, or other surfaces. 2. work varnished and figured in the Japanese manner. 3. Japans,… …   Universalium

  • Japan — /jeuh pan /, n. 1. a constitutional monarchy on a chain of islands off the E coast of Asia: main islands, Hokkaido, Honshu, Kyushu, and Shikoku. 125,716,637; 141,529 sq. mi. (366,560 sq. km). Cap.: Tokyo. Japanese, Nihon, Nippon. 2. Sea of, the… …   Universalium

  • France — /frans, frahns/; Fr. /frddahonns/, n. 1. Anatole /ann nann tawl /, (Jacques Anatole Thibault), 1844 1924, French novelist and essayist: Nobel prize 1921. 2. a republic in W Europe. 58,470,421; 212,736 sq. mi. (550,985 sq. km). Cap.: Paris. 3.… …   Universalium

  • List of Tesla patents — Below is a list of Tesla patents. Dr. Nikola Tesla was an inventor who obtained around 300 patents [Snezana Sarbo, [http://www.tesla symp06.org/papers/Tesla Symp06 Sarboh.pdfNikola Tesla s Patents] , Sixth International Symposium Nikola Tesla,… …   Wikipedia

Share the article and excerpts

Direct link
… Do a right-click on the link above
and select “Copy Link”