Derek McMinn

Derek McMinn M.D. F.R.C.S.
Nationality	British
Occupation	Orthopaedic Surgeon
Known for	Hip Resurfacing, Total Hip Replacement, Hip Revision Surgery, Total Knee Replacement, Knee Revision Surgery

Derek McMinn is a British orthopaedic surgeon and inventor who practises in Birmingham, United Kingdom at the BMI Edgbaston Hospital. Mr. McMinn developed the first successful modern metal-on-metal hip resurfacing^[1] and the instrumentation and surgical technique to implant it. Hip resurfacing is a bone-conserving, less invasive alternative to total hip replacement (THR) for young patients ^[2] and currently makes up around a tenth of all hip arthroplasty (artificial joint) procedures performed in the United Kingdom.^[3] McMinn is also the inventor of several other prostheses for the hip ^[4][5][6] and knee.^{[citation needed]}

Derek McMinn is the author of Modern Hip Resurfacing (ISBN 978-1848000872), published in 2009.

Hip Resurfacing

BIRMINGHAM HIP RESURFACING (BHR)

Mr. McMinn first began performing hip resurfacing procedures in 1991 using the McMinn Resurfacing.^[1] The rationale behind the procedure was that it would be a bone-conserving alternative to THR for patients with higher activity demands i.e. young patients with severe hip arthritis who are otherwise in good health. This would buy time until they reached an age at which they would be more suitable for a THR. THRs utilise small diameter metal-on-polyethylene bearings which have a high rate of dislocation and revision in this group of patients.

Sir John Charnley originally developed the conventional THR in the 1950s, which proved to be one of the most successful operations in the world. In this procedure the 'ball' part of the hip joint (femoral head) and a portion of its neck are removed and the 'socket' part (acetabulum) is grated in preparation. These are replaced with an artificial ball and socket with a long stem in the thigh bone. This and other designs of THRs have since transformed the quality of life of millions of old patients with severe hip arthritis. Because these devices contained polyethylene as one of the rubbing surfaces, Charnley was justifiably very wary of using it in young patients. He warned against the use of a THR in any young patient unless there were other physical restraining factors which would stop her/him from getting back to high activity levels. True to his prediction when these THRs were used in young patients they failed early even in the best centres around the world, including Charnley's own centre at Wrightington in the UK.^[7] The Swedish Hip Register shows that in young patients, 19% of THRs failed 10 years after the operation and 67% had failed by 16 years.^[8] Because these patients are young, early failure implies the need for repeated revision operations using progressively more invasive and more complex devices. It was therefore always attractive to surgeons to employ a bone conserving procedure in young patients initially. When they need a revision there is more useful bone preserved to fix the new device to.

McMinn's technique of resurfacing employs thin (3 to 4mm) metal surfaces to line the patients' own hip.^[9] In contrast to a THR, the femoral head and neck are retained in this procedure. These large diameter resurfacings match the patient’s own anatomy. Because they do not contain polyethylene, these bearings wear at a much lower rate, provided they are manufactured according to specifications, and are implanted well. These allow the patients to return to higher levels of activity after the operation without the fear of early wear.^[10][11] Furthermore, because the devices have the same diameter as the patients' own, they are less prone to dislocation.

Over the following years, McMinn further improved the design and operative technique, eventually developing the Birmingham Hip Resurfacing (BHR). The first BHR was implanted in July 1997, in Birmingham, England. Over the next few years its success spurred surgeons all over the United Kingdom, Europe, Australia and many parts of Asia to start performing the procedure. On 9 May 2006, the FDA approved the BHR for medical use in the United States.^[12] Following thirteen years of usage McMinn reports 96% success with his BHRs in all patients and all diagnoses. These resurfacings are particularly successful in young patients who are the worst group for THRs. His success rate of the BHR in this age group is 98% at 13 years.^[13] Several other series and national registers also show similar results of around 95% currently with the BHR.^[14] The 2009 Australian National Joint Replacement Registry reported a 95% success rate for the BHR.^[15]

Short Stem Hip Replacement

BIRMINGHAM MID HEAD RESECTION (BMHR)

In the early 2000s, McMinn found that the results of the BHR are excellent in all types of hip arthritis except one. In a condition called osteonecrosis, in which the ball part of the hip joint suffers a loss of blood supply and becomes non-viable, the results of hip resurfacing are not good (less than 90% success 10 years after their operation). Osteonecrosis can occur from a variety of reasons including fracture of the femoral neck, or patients who received high dose steroids due to any medical condition or those suffering from alcohol abuse. In such patients the quality of bone in the femoral head (the ball part of the hip) is compromised and progressively crunches leading to a failure of resurfacing. For such patients with poor quality femoral head bone stock, who are unsuitable for a regular hip resurfacing, McMinn developed a conservative and more versatile metal-on-metal arthroplasty, the Birmingham Mid Head Resection (BMHR) device. The BMHR is demonstrating good medium term results in such high risk patients.^[16]

Total Knee Replacement

BIRMINGHAM KNEE REPLACEMENT (BKR)

Derek McMinn describes himself as primarily a knee surgeon who digressed into hip surgery for a few years in the past couple of decades. His colleagues acknowledge him as one of the finest knee surgeons in the world. In addition to performing many complex primary and revision knee operations in the past three decades, he also designed and developed a revision total knee replacement (TKR) for extensive bone loss in the mid 1990s.

Current evidence shows that although knee replacements survive almost as long as hip replacements, the outcome of available designs of knee replacements are not as good as hip replacements. While only 1 to 5% of patients with a THR or a hip resurfacing are unhappy with their outcomes in the early years, nearly 20% of patients who undergo a knee replacement are dissatisfied with their outcome.^[17] In an attempt to improve the functional outcome following knee replacements McMinn developed a high performance knee which closely mimics the movement, stability and function of the natural knee to a greater extent. The world-class laboratory where the BKR was bench-tested reported that of all the artificial knees tested thus far, the BKR generated the least volume of war. Early outcomes with the Birmingham Knee Replacement (BKR) are very promising.^[18] Of course only time will tell if the long-term satisfaction of patients with BKRs match those with hip resurfacings.

Career

Derek McMinn went to Royal School Dungannon, Northern Ireland where he captained the 1st XV rugby team and represented Ulster Schools XV. He qualified from St Thomas' Hospital Medical school in London in 1977, having captained the 1st XV rugby team and won the Cheselden medal and 1st prize in surgery. He has practised as a Consultant Orthopaedic Surgeon since 1988.

McMinn personally trains surgeons from around the world in operative techniques. He is frequently invited to lecture at academic conferences around the world. He was given the honour of delivering the Presidential Guest Lecture at the Hip Society Open Meeting during the 75th Anniversary Meeting of the American Academy of Orthopaedic Surgeons in San Francisco in 2008.^[19]

McMinn was also invited to deliver the 2008 Sir John Charnley Lecture at the British Orthopaedic Association and the 2008 Sir Robert Jones Lecture at the New York University Hospital for Joint Diseases in New York City, USA. In addition he has delivered guest lectures at conferences in various countries from Japan to Australia to the Asia Pacific Orthopaedic Association, the European Federation of Orthopaedic Societies, the American Academy, the Argentinian Orthopaedic Association etc. He has addressed the Select Committee of the House of Commons in the United Kingdom apprising the members of parliament and senior civil servants of recent developments and strategies of healthcare as it applies to orthopaedics.

McMinn has published extensively on the topic of hip arthritis and several other related orthopaedic topics.^[20] Recently he released a book entitled, Modern Hip Resurfacing, which is a fascinating work on the development of resurfacing; and describes in detail all the nuances of the operative technique, in addition to being a treatise on the whole subject of resurfacing and its effects.

In 2009, in recognition of his contribution to the medical profession, McMinn was awarded the degree of Doctor of Medicine (MD) Honoris Causa by the University of Birmingham.

References

1. ^ ^{a b} McMinn, D; Treacy, R; Lin, K; Pynsent, P (1996). "Metal on metal surface replacement of the hip. Experience of the McMinn prothesis". Clinical orthopaedics and related research (329 Suppl): S89–98. PMID 8769326. 
2. ^ The Birmingham Hip Resurfacing
3. ^ National Joint Registry 2009
4. ^ Willemse P, Castelein RM, Bom PL, Verburg A, Verheyen CC. Clinical and radiological results of the stemmed Mc Minn cup in hip revision surgery. Acta Orthopedica Belgica 2010 Feb;76(1):58-62
5. ^ Badhe NP, Howard PW. Partially hydroxyapatite-coated stemmed acetabular cup and nonstructural bone-graft in the management of severe acetabular deficiency. Journal of Arthroplasty. 2000 Jan;15(1):63-8
6. ^ Schmalzried TP, Fowble VA, Ure KJ, Amstutz HC. Metal on metal surface replacement of the hip. Technique, fixation, and early results. Clinical Orthopaedics and Related Research 1996 Aug;(329 Suppl):S106-14.PMID: 8769328
7. ^ Joshi, AB; Porter, ML; Trail, IA; Hunt, LP; Murphy, JC; Hardinge, K (1993). "Long-term results of Charnley low-friction arthroplasty in young patients". The Journal of bone and joint surgery. British volume 75 (4): 616–23. PMID 8331119. http://www.jbjs.org.uk/cgi/pmidlookup?view=long&pmid=8331119. 
8. ^ Henrik Malchau, Peter Herberts, Peter Söderman, Anders Odén, Department Of Orthopaedics,, Göteborg University, Sweden., www.jru.orthop.gu.se
9. ^ Dehn, Tom (2005). "Controversial topics in orthopaedics: the best bearing couple for hip arthroplasty". Annals of the Royal College of Surgeons of England 87 (6): 411. doi:10.1308/003588405X71090. PMC 1964129. PMID 16263007. http://www.pubmedcentral.nih.gov/articlerender.fcgi?tool=pmcentrez&artid=1964129. 
10. ^ McMinn, D; Daniel, J (2006). "History and modern concepts in surface replacement". Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 220 (2): 239–51. doi:10.1243/095441105X68944. 
11. ^ Daniel, J; Pynsent, PB; McMinn, DJ (2004). "Metal-on-metal resurfacing of the hip in patients under the age of 55 years with osteoarthritis". The Journal of bone and joint surgery. British volume 86 (2): 177–84. doi:10.1302/0301-620X.86B2.14600. PMID 15046429. 
12. ^ FDA Approval for the BHR
13. ^ McMinn, DJ; Daniel, J; Ziaee, H; Pradhan, C (2010). "Indications and results of hip resurfacing". International orthopaedics 35 (2): 231–237. doi:10.1007/s00264-010-1148-8. PMC 3032116. PMID 21079954. http://www.pubmedcentral.nih.gov/articlerender.fcgi?tool=pmcentrez&artid=3032116. 
14. ^ Carrothers, AD; Gilbert, RE; Jaiswal, A; Richardson, JB (2010). "Birmingham hip resurfacing: the prevalence of failure". The Journal of bone and joint surgery. British volume 92 (10): 1344–50. doi:10.1302/0301-620X.92B10.23504. PMID 20884969. 
15. ^ 2009 Australian National Joint Replacement Registry
16. ^ McMinn, Derek J. W.; Daniel, Joseph; Ziaee, Hena; Pradhan, Chandra (2010). "Mid-Head Resection Technique for Complex Deformity". Techniques in Orthopaedics 25: 33–8. doi:10.1097/BTO.0b013e3181d2a969. 
17. ^ Scott, CE; Howie, CR; MacDonald, D; Biant, LC (2010). "Predicting dissatisfaction following total knee replacement: a prospective study of 1217 patients". The Journal of bone and joint surgery. British volume 92 (9): 1253–8. doi:10.1302/0301-620X.92B9.24394. PMID 20798443. 
18. ^ McMinn, Derek. Novel Strategies for TKR, London Knee Meeting Presentation, 2010.
19. ^ Program for the Meeting of the Hip Society, 8 March 2008
20. ^ List of publications

External links

• http://www.mcminncentre.co.uk/

Persondata
Name	McMinn, Derek
Alternative names
Short description	Orthopedic surgeon, inventor
Date of birth
Place of birth
Date of death
Place of death