Baker Street Mill, Orsett

Baker Street Mill, Orsett

which has been converted to residential use.

History

"Baker Street Mill" is said to have been built in 1765, although a date of 1762 is recorded in the mill. The earliest firm reference for the mill is 1796, this from a sale notice in 1808. It is likely that the mill was raised a storey between 1762 and 1814. The mill was working by wind until 1914. A steam mill was built near the mill towards the end of its working life. A new boiler being supplied in 1906.cite book | first = Kenneth| last = Farries| year = 1985| month = | title = Essex Windmills, Millers and Millwrights - Volume Four- A Review by Parishes, F-R| pages 93-94| publisher = Charles Skilton| location = Edinburgh| id = ISBN 0 284 98642 9]

The mill gradually became more and more derelict, losing two sails in 1926 to a lightning strike. The windmill and steam mill were converted to residential accommodation in 1982.

Description

"Baker Street Mill" is a three storey smock mill on a two storey brick base, with a stage at first floor level. The mill had four double Patent sails and the Kentish style cap is winded by a fantail.

Mill

‘’Baker Street Mill’’ has an octagonal two storey brick base. The walls of which are almost convert|3|ft|mm|0 thick at ground level. The base is convert|20|ft|4|in|m|2 across the flats and convert|48|ft|6|in|m|2 high, the brickwork at the top of the base is about convert|18|in|mm|0 thick. cite book | first = Kenneth| last = Farries| year = 1984| month = | title = Essex Windmills, Millers and Millwrights - Volume Two - A Technical Review| pages = p46-52| publisher = Charles Skilton| location = Edinburgh| id = ISBN 0 284 98637 2]

The smock is convert|21|ft|8|in|m|2 from sill to curb. The mill is convert|11|ft|m|2 diameter at the curb, the cant posts being about convert|10|in|mm|0 square. The stage is at first floor level, convert|8|ft|6|in|m|2 above the ground.

The cap is of Kentish style, with blisters for the Brake Wheel., with an overall height of some convert|8|ft|m|2, giving the mill an overall height of about convert|46|ft|6|in|m|2. Winding is by an eight-bladed fantail, although originally the mill was winded by hand.

ails and Windshaft

"Baker Street Mill" has a cast iron windshaft and four double Patent sails. The windshaft was originally a wooden one. The last working sails were an odd pair, the outer pair having eight bays of four shutters and one bay of three, the inner pair having eleven bays of three shutters.

Machinery

The wooden Brake Wheel is of clasp arm construction, convert|8|ft|m|2 diameter. It has been converted from compass arm construction. The rim is of elm. The Wallower is wooden, as is the Upright Shaft. The compass arm Great Spur Wheel is convert|7|ft|m|2 diameter, and has six arms. The mill originally worked two pairs of overdrift millstones, with a third pair being added later.

Fantail

"Baker Street Mill" was winded by an eight-bladed fantail, replacing the original hand winding by means of a Y wheel and chain, which was retained as a standby method of winding the mill.

Millers

*James Woollings 1830 - 1839
*William Woolings 1848 - 1886
*Emma Woolings 1890 - 1894
*Thomas Ridgewell 1898
*Christopher Moore 1902
*Arthur William Cocks 1908
*William Scott 1910
*H Lindsey 1912

References for above:-

External links

* [http://www.windmillworld.com/millid/2679.htm Windmill World] webpage on Baker Street Mill

References


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Orsett — Coordinates: 51°31′N 0°22′E / 51.51°N 0.37°E / 51.51; 0.37 …   Wikipedia

  • List of bus routes in Essex — A map which shows the area these services operate in. This is a list of bus routes in Essex, United Kingdom.[1] The major operators in the Essex area are First Essex, Hedingham Omnibuses and Regal Busways. Other operators in …   Wikipedia

  • Mardyke (river) — For the area in Cork City, see Mardyke. Coordinates: 51°29′9.29″N 0°13′41.14″E / 51.4859139°N 0.2280944°E / 51.4859139; …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”