Shuttle loom

Shuttle Looms

The major components of the loom are the warp beam, heddles, harnesses, shuttle, reed and takeup roll. In the loom, yarn processing includes shedding, picking, battening and taking-up operations.

Shedding. Shedding is the raising of the warp yarns to form a shed through which the filling yarn, carried by the shuttle, can be inserted. The shed is the vertical space between the raised and unraised warp yarns. On the modern loom, simple and intricate shedding operations are performed automatically by the heddle frame, also known as a harness. This is a rectangular frame to which a series of wires, called heddles, are attached. The yarns are passed through the eye holes of the heddles, which hang vertically from the harnesses. The weave pattern determines which harness controls which warp yarns, and the number of harnesses used depends on the complexity of the weave.

Picking. As the harnesses raise the heddles, which raise the warp yarns, the shed is created. The filling yarn in inserted through the shed by a small carrier device called a shuttle. The shuttle is normally pointed at each end to allow passage through the shed. In a traditional shuttle loom, the filling yarn is wound onto a quill, which in turn is mounted in the shuttle. The filling yarn emerges through a hole in the shuttle as it moves across the loom. A single crossing of the shuttle from one side of the loom to the other is known as a pick. As the shuttle moves back and forth across the shed, it weaves an edge, or selvage, on each side of the fabric to prevent the fabric from raveling.

Battening. As the shuttle moves across the loom laying down the fill yarn, it also passes through openings in another frame called a reed (which resembles a comb). With each picking operation, the reed presses or battens each filling yarn against the portion of the fabric that has already been formed. Conventional shuttle looms can operate at speeds of about 150 to 160 picks per minute.

With each weaving operation, the newly constructed fabric must be wound on a cloth beam. This process is called taking up. At the same time, the warp yarns must be let off or released from the warp beams (Corbman, 1975).

ee also

*Timeline of clothing and textiles technology
*Loom
*Weaving (mythology)
*Shuttle (weaving)

External Links

* [http://www.youtube.com/watch?v=WxFupVJOaFA Shuttle loom demonstration video 1]
* [http://www.youtube.com/watch?v=flUCPh9AsS0 Shuttle loom demonstration video 2]
* [http://www.faculty.de.gcsu.edu/~dvess/ids/fap/weav.html The Art and History of Weaving]
* [http://www.mageba.com/eng/shuttle.htm Shuttle looms for narrow fabrics]