Ag m/42

Ag m/42

Infobox Weapon
name= Ag m/42

type= Semi-automatic rifle
service= 1942 - 1960s (Sweden)
used_by=See Users
designer= Erik Eklund
variants= Ag m/42B
action= gas-operated
feed= 10-round box magazine

The Automatgevär m/42 (Ag m/42) (outside of Sweden commonly known as the "AG42", "AG-42" or "Ljungman") is a Swedish semi-automatic rifle in limited use by the Swedish Army from 1942 until the 1960s.


The Ag m/42 was designed by Erik Eklund of the AB C.J. Ljungmans Verkstäder company of Malmö around 1941, and entered production at the Carl Gustafs Stads Gevärsfaktori in Eskilstuna in 1942. Some 30 000 rifles were manufactured in all for the Swedish Army. This was a relatively small number of weapons and the standard infantry rifle remained the 6.5 mm bolt action m/96 Mauser.

Norwegian "police troops" trained in Sweden during World War II were issued a number of Ag m/42s and brought them with them to Norway when the Germans surrendered in 1945. These rifles were never modified to the later Ag m/42B version.

After a number of issues had been discovered, including a serious problem with rusting gas tubes, the existing stocks of the rifle were modified between 1953 and 1956, and the reworked rifles were designated Ag m/42B. Modifications included a stainless steel gas tube, two knobs on the breech cover, a new elevation knob for the rear sight, a rubber case-deflector, new magazines and new cleaning rod. Ag m/42B was replaced in Swedish service in the 1960s by the Heckler & Koch G3-derived Ak 4

The Ag m/42B was used as the basis for the Egyptian Hakim rifle, which uses the 7.92x57mm Mauser cartridge. Sweden sold the machinery to Egypt and the Hakim was therefore built with the same machine tools used for the Ag m/42B. Eventually, the Hakim was modified into a carbine using the intermediate-power 7.62x39mm Russian cartridge, called the Rashid or Rasheed.


The Ag m/42 is operated by means of a direct impingement gas system, similar to that of the French MAS-49 and American M16 rifles. The Ag m/42 also uses a tilting breech block like the Tokarev SVT-38 / SVT-40 and FN FAL rifles.

The Ag m/42 uses the 6.5x55mm cartridge loaded into a removable 10-round box magazine. In practice, however, the magazine usually remains attached to the rifle while it is loaded from the top with five-round stripper clips.

Use caution when firing the Ljungman and Hakim rifles as the burn rate of the powder has a dramatic effect on the operation of the rifle. There have been reported cases of catastrophic failures of both these rifles when fired with incorrect ammunition. Even the Swedish m/41 ammunition was required to be lightly oiled by Swedish troops prior to loading as the burn rate of the powder is too slow and the oiling of the cartridge body facilities extraction.

The main dynamic involves the pressure curve and the timing of the pressure curve as it relates to the location of the gas port in the barrel. While the Hakim has a gas port adjustment the Ljungman does not. As the bullet passes the gas port the gas pressure is channeled back to the bolt carrier to unlock the bolt. With a powder that is too slow a burn rate the bolt carrier opens violently premature and at an extremely excessive pressure. What this does is causes the extractor to tear the rim off the cartridge case exposing the action to the dumping of very high pressures which typically exits the action downward into the magazine well blowing the magazine completely out of the rifle and often destroying the magazine and stock in the process. Pay close attention to use the correct ammunition in these two rifles.



ee also

* Kg/1940 Light machine gun
*GRAM 63 battle rifle
*FM 1957 battle rifle

External links

* [ Modern Firearms article]
* [ Rec.guns article]
*sv icon [ Göta Vapenhistoriska Sällskap] with many pictures
* [ Design differences between the Ljungmann AG42 and the Hakim]
* [ Nazarian`s Gun`s Recognition Guide (MANUAL) Ljungmann Ag 42B Manual (.pdf)]

Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”