- 4D (train)
Infobox Train
name = Double-deck Prototype
caption = The 4D on the Flinders Street Viaduct
InService =1992 -1999 ,2000 ,2002
Formation = 4-car set (driving trailer-motor-motor-driving trailer)
Manufacturer = A. Goninan & Company Ltd
Factory =Newcastle, New South Wales
Designation = 6000T-5000M-5002M-6002T
Operator =Public Transport Corporation , Connex
LinesServed = Belgrave, Lilydale
yearconstruction =1991
yearservice =10 March 1992
yearscrapped =2006
numberconstruction = 1 set (4 cars)
numberbuilt = 1 set (4 cars)
numberservice = 1 set (4 cars)
art-sections = 3 per set, enclosed gangway.
doors = 4x twin-leaf plug doors per car (2 either side)
MaxSpeed = 130km/h
Weight = 186tonnes
Capacity = T car: 76 seated, 149 standing
M car: 97 seated, 165 standing
Total (4-car set): 974 total
(346 seated, 628 standing)
Acceleration = 0.75 m/s/s
Traction = 8 x 170 kW, chopper control
Power-supply = 1.5 kV DCOverhead lines
Gauge = Broad (1600 mm, 5' 3")
numberscrapped = 1 set (4 cars)
CarBody =Stainless steel
CarWidth = 2,890 mm
CarHeight = 4,270 mm
CarLength = 20.320 mThe 4D (meaning Double Deck Development and Demonstration) was a
prototype double deck electric multiple unit train built for thePublic Transport Corporation ofMelbourne , the state capital of Victoria,Australia . It remains the only double deck train ever to have run in Melbourne.Design
Built by Goninan in 1991, [http://www.vicsig.net/index.php?page=suburban§ion=4d Vicsig.net: 4D train] ] the train's design was based on that of the
Tangara train used inSydney . However it was similar only in terms of interior and exterior bodywork; the train's electrical system was much closer to that of a Comeng, and was incompatible with that of the Tangara.The design was further modified for use on Melbourne's
broad-gauge track, and its control system was designed specifically to allow in-service coupling and operation with Comeng sets.It was manufactured from stainless steel, fitted with air-conditioning, tinted windows, and inter-car doors allowing passengers to access all carriages of the train. It had a total passenger capacity of 974 passengers: 346 seated and 628 standing.
As part of the trial, the Belgrave and Lilydale lines were selected as main testing grounds for the unit and necessary works were performed to accommodate the train's somewhat unconventional dimensions. Works were slated for other lines in the suburban system, but it is not known whether they were ever carried out; the train's confinement to the Belgrave and Lilydale lines suggests that they were not. It was known that the train was physically too large for the Jolimont tunnel between Jolimont and West Richmond railway stations on the Hurstbridge and Epping lines. Given that the train was a demonstrator, it was likely that production designs or future infrastructure plans would have dealt with this.
ervice
The 4D was shipped to Melbourne from Goninan's workshops in
Newcastle, New South Wales , in December 1991, where it then entered a period of testing.The unit broke from Melbourne tradition by being configured as Driving Trailer-Motor-Motor-Driving Trailer (D-TM-TM-D); all other sets in service at the time were (and are still) configured as Driving Motor-Trailer-Driving Motor (M-T-M). In a further break from tradition, the 4D did not use the 'D' code for a driving trailer, instead it was coded simply as T-M-M-T. The car numbers were also placed far outside the usual range; the 4D was numbered as 6000T-5000M-5002M-6002T for its whole service life.
It was first introduced into revenue service on
10 March 1992 , after testing and a subsequent media launch. Eight trips were scheduled for its first day in service, the first being the 08:36am service from Flinders Street to Box Hill, followed by the 09:08am service back to Flinders Street, on which the train suffered the first of its many failures. This required the train to be removed from service at Camberwell and the cancellation of the remaining trips.Initially the 4D was run coupled to a 3-car Comeng set until
1996 when, after a troubled conversion to driver-only operation, it was permitted to operate on its own. Often as not, though, it was towed or pushed by a 3- or 6-car Comeng set following a failure.When the suburban system was split into two in
1998 in preparation for privatisation, it was allocated to Hillside Trains (which became Connex).Throughout its 10 years in Melbourne, the 4D continued to be plagued by reliability issues that saw it constantly in and out of service. After its disappointing entry to service, the train saw little use and was in storage by
1999 . It was revived in June2000 , but lasted only a year.A final attempt was made in February
2002 to return the set to service, but after three days it again failed and was placed back in storage, never to run revenue service again. [ [http://www.vicsig.net/photo.php?filename=20020222_4d_laburnam-gl.jpgVicsig.net photo: "The 4D lasted 3 days in service during 2002. It is shown here on a Blackburn to Flinders St service at Laburnum" - Friday, 22nd February 2002] ] [ [http://www.vicsig.net/photo.php?filename=20020324-rwd-hitachi-4d.jpgVicsig.net photo: "The 4D withdrawn and stored at Ringwood" - Sunday, 24th March 2002] ]Disposal
Ownership of the 4D was transferred back to the
Victorian Government Department of Infrastructure, and the set was railed, ironically under its own power, to Newport Workshops in December 2002 for long-term storage. [ [http://www.vicsig.net/photo.php?filename=20021214-nps-4d.jpgVicsig.net photo: "The 4D in storage at Newport Workshops" - Saturday, 14th December 2002] ]In
2006 , the 4D was purchased by RailCorp, theNew South Wales Government-owned corporation responsible for operatingSydney 's suburban network) andUnited Group Rail , Goninan's successor company. From March of that year, the train was stripped of parts suitable for use inCityRail 'sTangara fleet. [ [http://www.vicsig.net/photo.php?filename=20060325-nps-4d-stripping.jpgVicsig.net photo: "The 4D train being stripped of usable parts prior to scrapping at Newport Workshops" - Saturday, 25th March 2006] ]Following the removal of these components – mostly doors, seats and other interior furnishings – RailCorp wrote the train off its books and ordered it be scrapped. On
29 March 2006 , the 4D was transferred by El Zorro Rail Services to metal recyclers Simsmetal in Brooklyn, where it was cut up and recycled. [ [http://wongm.fotopic.net/c906013.html Photos of the 4D's Last Run] ] [cite web| url=http://www.railpage.com.au/f-t11315667-0-asc-s15.htm| title=Railpage Australia: 4D Still at Newport... intact?| month=18 Mar| year=2006| publisher=Railpage Australia| accessdate=2006-03-23]External links
* [http://www.vicsig.net/index.php?page=suburban§ion=rollingstock&traintype=4D 4D at Vicsig]
References
Wikimedia Foundation. 2010.