Vincent Rapide

Infobox Motorcycle
left
name=Vincent Rapide


aka=
manufacturer=flagicon|UK Vincent HRD Co., Ltd
production=1936-1955
class=
related=
wheelbase= convert|55.5|in|mm|sing=on
length=
width=
height=
seat height=
engine= 998cc Twin cylinder, OHV, air cooled, pushrod V-twin
power=45 hp @ 5200 rpm
torque=
dry weight=208 kg (458 pounds)
fuel_capacity=3.75 gals
fuel_economy=
transmission=

The Vincent Rapide was designed and built at the Vincent works in Great North Road, Stevenage, Hertfordshire UK during the war and released to the press before end of hostilities. The prototype was the "Series A" 47.5° V-twin launched in 1936. [ [http://www.dropbears.com/m/models/classic/vinhistory.htm] Dropbears Histories (Retrieved 22 October 2006)] With 6.8:1 compression, it produced convert|45|bhp|abbr=on. It is often purported that Phil Irvine was trying to find a replacement for the 500cc Comet engine. There were two blueprints on his desk, and one had fallen on top of the other, to demonstrate a "V" formation. There is no evidence to prove this, however. Its frame incorporated the first cantilever rear suspension, used on all subsequent Vincents. Other innovations included a foot gearchange instead of a hand-operated gearlever, a four-speed gearbox instead of two or three and a side stand.

The high horsepower meant that the gearbox and clutch did not cope well. [ [http://www.ianchadwick.com/motorcycles/britbikes/britbikes_index.html] IanChadwick Vincent (Retrieved 22 October 2006)] and it was developed into the ‘"Series B"’ which had internal oil pipes and the gearbox integrated with the engine casting (Unit Construction). The angle between the cylinders was increased to 50° instead of the 47.5° of the Series A engine, which allowed the use of the engine as part of the frame. The Rapide had ‘’Girdraulic’’ front forks and triangulated rear springing to prevent front end twist under hard braking. [ [http://www.thevincent.com/vincent%20engine.html The Vincent, accessed 2005-05-3] ] and the cantilever rear became the most widely used form of rear suspension for motorcycles after 1980. Brakes were dual 7 inch single-leading shoe (SLS), front and rear. A more modern hydraulic shock absorber and spring assembly later replaced the old twin springs and friction damper. The rear seat was supported by a sub-frame down to the rear frame pivot point, providing a semi-sprung seat with convert|6|in|mm of suspension. The Series B had a Feridax Dunlopillo Dualseat, and a tool tray under the front. [ [http://www.thevincent.com/vinmodel.htm] TheVincent Models and Fittings (Retrieved 22 October 2006)] The Series "B" also had an inline felt oil filter instead of the metal gauze of the Series "A".

Vincent used quickly detachable wheels, making wheel and tyre changes easier. The rear wheel was reversible, and different size rear sprockets could be fitted for quick final-drive ratio changes.The brake & gear shift were adjustable for reach to suit individual feet and the rear mud guard was hinged to facilitate the removal of the rear wheel.

The letters HRD were discontinued in 1950. Vincent were trying to enter the American market, and did not want any confusion with Harley-Davidson (H-D). Falling sales of expensive motorcycles caused closure in 1956. Vincent refused to compromise on quality, which, unfortunately, kept the price up. It has often been said that the firm was guilty of "over engineering". One comment made about this was that "Vincent is a solution in search of a problem."

References

ee also

* Vincent Motorcycles
* Vincent Black Shadow

Links

* [http://lsvoc.vincent-hrd.co.uk/voc_links.html Vincent Owners Club links]
* [http://www.mcnews.com.au/Features/2003/Vincent_Rapide/VincentRapide.htm Motorcycle News review]