Immersed tube

Immersed tube

An Immersed Tube is a kind of underwater tunnel comprised of segments and/or elements, constructed elsewhere and floated to the tunnel’s site to be sunken into place (often into an excavated trench), with the elements being connected, finished (drained, ballast added, internal works, etc.) and covered up once in location. They have so far been used for road and rail crossings of rivers, estuaries and sea channels/harbours. Immersed tubes are often used in conjunction with other forms of tunnel at their end, such as a cut and cover or bored tunnel, which is usually necessary to continue the tunnel from near the water’s edge to the entrance at the land surface.The main advantage of an immersed tube is that they can be considerably more cost effective than alternative options – i.e. a bored tunnel beneath the water being crossed (if indeed this is possible at all due to other factors such as the geology/seismicity) or a bridge. Other advantages relative to these alternatives include:
* Their speed of construction
* Minimal disruption to the river/channel, if crossing a shipping route
* Resistance to seismicity
* Safety of construction (for example, work in a dry dock as opposed to boring beneath a river)
* Flexibility of profile (although this often partly dictated by what is possible for the connecting tunnel types)

Disadvantages include:
* Vulnerability to sabotage as it is arguably easier to damage and breach their walls or roof than to achieve the same to a bored tunnel.Fact|date=September 2008
* The tunnel is partly exposed (usually with some rock armour and natural siltation) on the river/sea bed, risking a sunken ship/anchor strike
* Both of these disadvantages should be considered and designed for, although by the nature of these risks are hard to quantify and assess using a risk analysis
* Direct contact with water necessitates careful waterproofing design around the joints
* The segmental approach requires careful design of the connections, where longitudinal effects and forces must be transferred across

The immersed tube is the most frequently applied type applied in the Netherlands.

Examples

* Hong Kong Cross-Harbour Tunnel
* 63rd Street Tunnel, a four-bore rail tunnel under the East River in New York City
* Sydney Harbour Tunnel - road
* Transbay Tube, a BART rail tunnel under San Francisco Bay
* Detroit-Windsor Tunnel, two-lane automobile tunnel under Detroit River, leading from Windsor, Ontario to Detroit, Michigan
* The Posey and Webster Street Tubes, connecting Oakland and Alameda, California.
* The Fort McHenry Tunnel in Baltimore, Maryland.
* Marmaray in Istanbul
* Jack Lynch Tunnel in Cork
* Limerick Tunnel in Limerick,Ireland
* A55 Conwy Bypass Tunnel, Conwy, Wales,United Kingdom
* The Ted Williams Tunnel in Boston, Massachusetts
* The Maastunnel in Rotterdam, the Netherlands
* The tunnel sections of the Chesapeake Bay Bridge-Tunnel
* The Medway Tunnel in Kent, United Kingdom
* Tingstadstunneln, Sweden
* New Tyne Crossing, Newcastle, United Knigdom

See also

* Archimedes bridge


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • immersed tube — ▪ engineering also called  Sunken Tube,         technique of underwater tunneling used principally for underwater crossings. The method was pioneered by the American engineer W.J. Wilgus in the Detroit River in 1903 for the Michigan Central… …   Universalium

  • Thiele tube — The Thiele tube, named after the German chemist Johannes Thiele, is a laboratory glassware designed to contain and heat an oil bath. Such a setup is commonly used in the determination of the melting point of a substance. The apparatus itself… …   Wikipedia

  • Sand tube — Sand Sand, n. [AS. sand; akin to D. zand, G. sand, OHG. sant, Icel. sandr, Dan. & Sw. sand, Gr. ?.] 1. Fine particles of stone, esp. of siliceous stone, but not reduced to dust; comminuted stone in the form of loose grains, which are not coherent …   The Collaborative International Dictionary of English

  • torricellian tube — noun Usage: usually capitalized 1st T : a glass tube open at one end and hermetically sealed at the other and of such length that when filled with a liquid (as mercury) and immersed at the open end in a vessel of the same liquid allowing the… …   Useful english dictionary

  • fire-tube boiler — /fuyeur toohb , tyoohb / any boiler for generating steam by passing hot gases and other combustible products through tubes (fire tubes) immersed in water to a chimney or uptake. Cf. water tube boiler. * * * …   Universalium

  • fire-tube boiler — /ˈfaɪə tjub ˌbɔɪlə/ (say fuyuh tyoohb .boyluh) noun a boiler in which the combustion products pass through tubes immersed in the water space on their way to the chimney. Compare water tube boiler …  

  • fire-tube boiler — noun : a boiler in which water surrounds the tubes through which hot gases pass from the furnace to the stack * * * /fuyeur toohb , tyoohb / any boiler for generating steam by passing hot gases and other combustible products through tubes (fire… …   Useful english dictionary

  • tunnels and underground excavations — ▪ engineering Introduction        Great tunnels of the world Great tunnels of the worldhorizontal underground passageway produced by excavation or occasionally by nature s action in dissolving a soluble rock, such as limestone. A vertical opening …   Universalium

  • Jack Lynch Tunnel — The Jack Lynch Tunnel (named after the former Taoiseach Jack Lynch), or Tollán Seán Ó Loinsigh in Irish, is an immersed tube tunnel and an integral part of the N25 southern ring road of Cork in Ireland. It takes the road under the River Lee.… …   Wikipedia

  • Marmaray — Marmaray, the world s deepest immersed tube tunnel Overview Location Bosphorus strait Status Under construction Start F …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”