Tandem mill

Tandem mill

Tandem mill is a special type of modern rolling mill where rolling is done in one pass. In a traditional rolling mill rolling is done in several passes.

But in tandem mill there are several stands and reduction takes place one after another. In traditional mills there are only one stand with 6 rolls (in 6 HI rolling mill) or 4 rolls (in 4 HI rolling mill). But in tandem mill there are more than one stands. Number of stands ranges from 2 stand, 4 stand [ [http://www.ipmx.com/html/tour/2stand.html PMX Industries, Inc ] ] up to 18 stands.

Tandem mill can be either hot or cold rolling mill type.

ee also

* Rolling mill
* Rolling (metalworking)
* Hot rolling
* Cold rolling
* Structural steel
* Steel mill

Notes and references

External links

* [http://www.freepatentsonline.com/4658620.html Patent] of Tandem mill,
* [http://www.freepatentsonline.com/4658620.html Definition] of Tandem mill.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Tandem mill — Tandem mill. См. Многоклетьевой прокатный стан. (Источник: «Металлы и сплавы. Справочник.» Под редакцией Ю.П. Солнцева; НПО Профессионал , НПО Мир и семья ; Санкт Петербург, 2003 г.) …   Словарь металлургических терминов

  • tandem mill — noun : a rolling mill with several stands in succession …   Useful english dictionary

  • tandem mill — Смотри стан тандем …   Энциклопедический словарь по металлургии

  • Mill's Methods — are five methods of induction described by philosopher John Stuart Mill in his 1843 book A System of Logic. They are intended to illuminate issues of causation. Contents 1 Direct method of agreement 2 Method of difference 3 …   Wikipedia

  • Mill Meece Pumping Station — Exterior of Mill Meece Pumping Station Mill Meece Pumping Station is a pumping station, located in the village of Millmeece in Staffordshire, England. Its function, powered by steam engines, was to pump water from boreholes to a reservoir in… …   Wikipedia

  • Steckel mill — The Steckel mill is a unique type of rolling mill for the processing of steel slabs to hot rolled coil (HRC). The Steckle mill allows the rolling of a large slab by providing heated reels on both sides of the mill to store the increased length… …   Wikipedia

  • Dawn Mill, Shaw — Coordinates: 53°34′34″N 2°05′32″W / 53.5762°N 2.0923°E / 53.5762; 2.0923 …   Wikipedia

  • Magnet Mill, Chadderton — Coordinates: 53°32′16″N 2°08′46″W / 53.5378°N 2.1461°E / 53.5378; 2.1461 …   Wikipedia

  • Cement mill — A 10 MW cement mill, output 270 tonnes per hour A cement mill (or finish mill in North American usage[1]) is the equipment used to grind the hard, nodular clinker from the cement kiln into the fine grey powder that is cement. Most cement is… …   Wikipedia

  • Nether Alderley Mill — Coordinates: 53°16′57″N 2°14′12″W / 53.2826°N 2.23669°W / 53.2826; 2.23669 …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”