- Kelly tool
"Not to be confused with
K-tool ."The Kelly tool is a tool used in
fire and rescue service forforcible entry and other prying and striking tasks. The predecessor of theHalligan bar , it has largely been superseded by the latter, but still sees some use.The kelly tool is named after its designer, Captain John F. Kelly of H&L Company 163 (
FDNY ). It consists of a straight steel bar, generally about 28 inches long. One end is formed into a chisel; the opposite end has anadz blade. The primary advantage over the claw tool it replaced is that the striking end (the adz) is in a straight line with the rest of the tool; on the claw tool the corresponding end was curved into a hook with no flat surfaces.The kelly tool was intended specifically for opening doors and other barriers. Modern versions often are modified along the lines of the Halligan bar, especially at the chisel end. Originally the chisel blade was flat and straight; more recently it has tended to take on a curved and forked form, similar to the claw of a carpenter's
hammer . There are similar tools referred to generically as "kelly tools", but in general they are variations on the original form.References
*cite paper
title = Forcible Entry Reference Guide - Techniques and Procedures
publisher =New York City Fire Department
date = December 2006
url = http://www.firefactory.com/FE.pdf
accessdate = 2008-03-05 pp. 18-19.
*cite book
title = Tools of the Trade: Firefighting Hand Tools and Their Use
first = Richard A. |last = Fritz
page = 35-37
publisher = PennWell Books
date = 1997
accessdate = 2008-03-05
Wikimedia Foundation. 2010.
