Tree stand

Tree stands give an edge to hunters who use them. Many people also know tree stands as deer stands. Tree stands are becoming more popular with advances in technology.

Types

Hunters use three different types of tree stands. A fourth type of stand is a free standing stand that doesn’t require a tree to hold it up. The free standing stand is also known as a tripod stand.

Climbing Stand

Two parts make up climbing stands. The bottom part is the standing platform and the top is the seat. Not all the top parts have backs for the seats. There is normally a strap that connects the two parts, so if the bottom falls while in the tree or climbing, the platform doesn’t fall all the way to the ground stranding the hunter. Only trees that have no limbs up to the height desired for hunting will work.

Climbing tree stands have a couple of different styles to connect to the tree. The part that wraps around the tree can be made from a thick cable or boomerang shaped piece of metal. The part that wraps around the tree is fastened to the stand with a bolt or pin for easy adjustment for different tree sizes.

Before climbing the tree both parts need to be adjusted to the tree so they are level for the hunter to stand and sit on. To climb the tree the back of each part is angled to the tree one at a time and pulled up. Then the part that the hunter is moving is set back level and the next part is moved up. This is done until the hunter is at the desired height. For safety some hunters strap the tree stand to the tree. To go down the hunter does the same as climbing up except goes down.

Ladder Stand

Ladder stands are a stand with a seat and platform along with the ladder to climb up in to the stand. A ladder stand has a seat and platform that connect to the tree with the ladder coming off the front of the platform to give the hunter access to the stand. Ladder stands are stationary because of the size and lack of ability to move through the woods quietly. Stability is good because of the connection to the tree and support from the ground. Hunters can use one and two person ladder stands.

Hanging Stand

Hanging stands can resemble ladder stands without the ladder, and the hanging stand is also stationary. Hanging stands connect to the tree with chains or cables at the desired height. To get up to a hanging stand hunters use ladders or sections of ladders secured to the tree, or they use screw in steps that screw in the tree and allow the hunter to climb up to the stand.

Uses

Tree stands allow hunters to use them in different ways. Whitetail hunting is the most popular animal to hunt out of a tree stand, but other animals can be hunted from tree stands.

Tree stands give the advantage to the hunter because the hunter sits up in a tree. The hunter can hide in the tree and see the deer coming before they would see the deer coming from on the ground.

Hunters use climbing stands to take the stand to different locations easily. Although not permanent like ladder stands and hanging stands, they can relocate a hunter to a different tree easily. Some hunters do leave them in the woods at the base of the tree. Climbing stands allow hunters that want to hunt form them to use a climbing stand at a location that will not allow them to keep a stand up during the whole season. Often ladder stands and hanging stands do not move easily, so they tend to stay on one tree. Because branches limit climbing stand use, ladder stands and hanging stands allow hunters more options on the trees with many branches at a lower height.

A few accessories are available for tree stands. Rope from the stand to the ground allows the hunter to pull up accessories or their weapon once in the stand. Besides the safety, hanging, ladder, and rope equipment, hunters can get:• Bow holders• Shooting rests• Blinds for around the stand• Covers over the stand

afety

Safety is the biggest tool for use in tree stands. A body harness is the most important part of tree stand safety. Many different styles of harness can keep hunters safe. One harness compiled of a belt around the waste of the person and one around tree with a strap between the two can keep the hunter safe. Another harness is a full body harness, which has shoulder straps and straps around the legs. The full body harness attaches to the tree the same way the belt harness does. Attaching the harness as soon as the hunter is in the tree keeps the hunter safe while setting up for the hunt. The strap between the harness and strap around the tree should be long enough to allow the hunter to move a little and short enough so if the hunter falls they do not fall too far.

Tree stand users should always check over their stands to ensure good working condition. A tree stand in poor condition can be unsafe for the hunter to hunt from. Checking he steps up to the stand for safely and stability can prevent falling while climbing up to the stand.

ee also

Deer hunting

References

Tree Stand Hunting. 2007. 20 February 2008. http://www.treestandinfo.com/