- FAB effects
The FAB effects are a line of low cost
guitar effect pedal s that were launched byDanelectro in the 2000s. These pedals were released as a low cost alternative to other effects pedals which can be much more expensive.Construction
The Fab series is made from plastic with a metal bottom plate. Similar to Danelectro's "lunchbox" or "mini" models, the bottom plate is removable by unscrewing the single large plastic screw on the bottom with a flathead screwdriver or small coin. The removal of the bottom plate reveals the circuitry and the 9 volt battery.
The FAB pedals have standard 1/4 inch size phono jacks for input/output and can be run on either a 9 volt battery or from an external 9V DC power source.
The effects on/off status is indicated by an LED in the centre of the pedal.
Design
The FAB series design is unique in that it has three raised tubes running along the top of the pedal which end at the top of the pedal with the control knobs mounted on the end facing the back. This is to avoid any unwanted adjustments to the control knobs while stomping the pedal due to its small size.
Range
* FAB Distortion
* FAB Overdrive
* FAB Metal
* FAB Chorus
* FAB Flanger
* FAB EchoExternal links
* [http://www.danelectro.com Danelectro Official Website]
Wikimedia Foundation. 2010.
