Thermal hydraulics

Thermal hydraulics

Thermal hydraulics (also called thermohydraulics) is the study of hydraulic flow in thermal systems. A common example is steam generation in power plants and the associated energy transfer to mechanical motion and the change of states of the water while undergoing this process.

The common adjectives are "thermohydraulic" or "thermal-hydraulic".

ee also

* Heat
* Heat pump
* Heat transfer coefficient


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Corium (nuclear reactor) — LFCM redirects here. For the airport, see List of airports by ICAO code: L. The Three Mile Island reactor 2 after the meltdown. Corium, also called fuel containing material (FCM) or lava like fuel containing material (LFCM), is a lava like molten …   Wikipedia

  • Behavior of nuclear fuel during a reactor accident — This page is devoted to a discussion of how uranium dioxide nuclear fuel behaves during both normal nuclear reactor operation and under reactor accident conditions such as overheating. Work in this area is often very expensive to conduct, and so… …   Wikipedia

  • Nuclear engineering — is the branch of engineering concerned with the application of the breakdown (fission) as well as the fusion of atomic nuclei and/or the application of other sub atomic physics, based on the principles of nuclear physics. In the sub field of… …   Wikipedia

  • Heat transfer — is a discipline of thermal engineering that concerns the exchange of thermal energy from one physical system to another. Heat transfer is classified into various mechanisms, such as heat conduction, convection, thermal radiation, and phase change …   Wikipedia

  • Nuclear fuel — Process …   Wikipedia

  • Molten-Salt Reactor Experiment — MSRE plant diagram The Molten Salt Reactor Experiment (MSRE) was an experimental molten salt reactor at the Oak Ridge National Laboratory (ORNL) researching this technology through the 1960s; constructed by 1964, it went critical in 1965 and was… …   Wikipedia

  • Heat transfer coefficient — The heat transfer coefficient, in thermodynamics and in mechanical and chemical engineering, is used in calculating the heat transfer, typically by convection or phase change between a fluid and a solid::Delta Q=h cdot A cdot Delta T cdot Delta… …   Wikipedia

  • Propulsion nucleaire thermique — Propulsion nucléaire thermique La propulsion nucléaire thermique ou nucléo thermique est un mode de propulsion des fusées qui utilise un réacteur nucléaire pour chauffer un fluide propulsif. Celui ci, comme dans le cas d un moteur fusée classique …   Wikipédia en Français

  • Propulsion nucléaire thermique — La propulsion nucléaire thermique ou nucléo thermique est un mode de propulsion des fusées qui utilise un réacteur nucléaire pour chauffer un fluide propulsif. Celui ci, comme dans le cas d un moteur fusée classique, est expulsé via une tuyère… …   Wikipédia en Français

  • Ford Nuclear Reactor — The Ford Nuclear Reactor was a facility at the University of Michigan in Ann Arbor dedicated to investigating the peaceful uses of atomic energy. It was a part of the Michigan Memorial Phoenix Project, a living memorial created to honor the… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”