Kerr Stuart steam railmotor

Kerr Stuart steam railmotor

Infobox Locomotive
name=Kerr Stuart steam motor car
powertype=Steam - Vertical Boiler



caption=
builder=Kerr Stuart & Co. - Boiler Victorian Railways at Newport Railway Workshops - Body
designer=Kerr Stuart & Co.
builddate=1912
totalproduction=1
length=60 ft
weight=
tenderc

firearea =14.18 ft²
totalsurface=663.64 ft²
axleload=
topspeed=Unknown
poweroutput=
tractiveeffort = 160 lbf

The Kerr Stuart steam railmotor was a one-off creation by the Victorian Railways. It was built in 1912 using a vertical boiler manufactured by the English company, Kerr Stuart & Co. and a body built by the Victorian Railways at its Newport Railway Workshops where the railmotor was assembled. It ran for 50,000 miles before it was withdrawn.

ee also

*Victorian Railways


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Railmotor — is a term which was used by several British railway companies for a steam railcar.OverviewWilliam Bridges Adams started building railmotors as early as 1848, but only in small numbers. One example was the Bristol and Exeter Railway Fairfield… …   Wikipedia

  • GWR steam rail motors — The steam rail motors (SRM) were self propelled carriages operated by the Great Western Railway in England and Wales from 1903 to 1935. They incorporated a steam locomotive within the body of the carriage.HistoryOne of the London and South… …   Wikipedia

  • McKeen railmotor — in Wodonga, Australia, 1911. Power type 6 cylinder gasoline engine Designer McKeen Company Builder McKeen Company of Omaha, Nebraska …   Wikipedia

  • Diesel Electric railmotor (VR) — D.E.R.M. (originally P.E.R.M.) RM58 At Newport Workshops Power type Diesel engine, Originally Petrol Designer St Louis Car Company Builder St Louis Car Company (First) …   Wikipedia

  • DRC railcar — DRC 43 in V/Line livery at the Seymour Railway Heritage Centre Manufacturer Tulloch Limited Built at Tulloch Sydney …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”