Etienne Lenoir (instrument maker)

Etienne Lenoir (instrument maker)

Etienne Lenoir (1744-1832) was a French scientific instrument maker and inventor of the "repeating circle".

When hired by Jean-Charles de Borda around 1772 to work on the "reflecting circle", he was about thirty years old and nearly illiterate. However, his intelligence and mechanical genius allowed him to perform work that few others could perform. He played a significant role in the improvements to the reflecting circle and later used this experience in inventing the repeating circle. As a result of this work, he became known as the pre-eminent maker of instruments for astronomy, navigation and surveying in France.

In 1787, the king of France appointed him "certificated engineer to the king". He created the instruments used on all the major French geodetic surveying projects and major naval expeditions of the time.

He worked primarily for the "Commission des Poids et Mesures" (Weights and Measures Commission) after 1792 and for the Commission du Metre (Metre Commission - for the determination of the metric unit of length, the metre). For these commissions, he produced the instruments used to measure the meridian and created the platinum rules for baseline measurements. In 1793, he made and signed the provisional standard brass metre. He also invented a comparator for the measurement of the definitive standard metre.

Lenoir was also a member of the "Commission temporaire des Arts" (1793-1794). He was made a member of the "Bureau des Longitudes" in 1814 and received the Legion of Honour.

He son, Paul-Etienne Lenoir, followed on in his footsteps, taking over his workshop around 1815 and continuing his work after Lenoir senior's death.

References

*Daumas Maurice, "Scientific Instruments of the Seventeenth and Eighteenth Centuries and Their Makers", Portman Books, London 1989 ISBN 978-0713407273


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Lenoir — may refer to the following persons: * Etienne Lenoir, Belgian pioneer of the internal combustion engine * Etienne Lenoir (instrument maker), French instrument maker, inventor of the repeating circle. * J. B. Lenoir, Blues singer * Noémie Lenoir,… …   Wikipedia

  • Reflecting instrument — Reflecting instruments are those that use mirrors to enhance their ability to make measurements. In particular, the use of mirrors permits one to observe two objects simultaneously while measuring the angular distance between the objects. While… …   Wikipedia

  • technology, history of — Introduction       the development over time of systematic techniques for making and doing things. The term technology, a combination of the Greek technē, “art, craft,” with logos, “word, speech,” meant in Greece a discourse on the arts, both… …   Universalium

  • Dividing engine — at the Michigan Museum of Surveying A dividing engine is a device specifically employed to mark graduations on measuring instruments. History There has always been a need for accurate measuring instruments. Whether it is a linear device such as a …   Wikipedia

  • Repeating circle — The repeating circle is an instrument for geodetic surveying, invented by Etienne Lenoir in 1784 [Daumas, Maurice, Scientific Instruments of the Seventeenth and Eighteenth Centuries and Their Makers , Portman Books, London 1989 ISBN 978… …   Wikipedia

  • Jean-Charles de Borda — Infobox Scientist name = Jean Charles de Borda box width = image width =150px caption = Jean Charles de Borda birth date = May 4, 1733 birth place = Dax death date = February 19, 1799 death place = residence = citizenship = nationality = French… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”