Hot-bar reflow

Hot-bar reflow

Hot-bar reflow is a selective soldering process where two pre-fluxed, solder coated parts are heated with heating element (called a thermode) to a sufficient temperature to melt the solder.

Pressure is applied through the whole process (usually 15 s) to insure that components stay in place during cooling. The heating element is heated and cooled for each connection. Up to 4000 W can be used in the heating element allowing fast soldering, good results with connections requiring high energy. [cite web|title=Unitek Eapro: Electronic Assembly Products|url=http://www.unitekeapro.com/pages.php?id=85 070927 unitekeapro.com]

References


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Soldering — For the song, see Soldering (song). For the product, see Solder. Desoldering a contact from a wire. Soldering is a process in which two or more metal items are joined together by melting and flowing a filler metal (solder) into the joint, the… …   Wikipedia

  • Thermal management of electronic devices and systems — Heat generated by electronic devices and circuitry must be dissipated to improve reliability and prevent premature failure. Techniques for heat dissipation can include heatsinks and fans for air cooling, and other forms of computer cooling such… …   Wikipedia

  • Wave soldering — is a large scale soldering process by which electronic components are soldered to a printed circuit board (PCB) to form an electronic assembly. The name is derived from the use of waves of molten solder to attach metal components to the PCB. The… …   Wikipedia

Share the article and excerpts

Direct link
… Do a right-click on the link above
and select “Copy Link”