- 107 mm divisional gun M1940 (M-60)
Infobox Weapon
name=107 mm divisional gun M1940 (M-60)
caption=M-60 in the Artillery Museum, Saint Petersburg
origin=USSR
type=field gun
is_ranged=
is_bladed=
is_explosive=
is_artillery=yes
is_vehicle=
is_UK=
service=
used_by=USSR
wars=WWII
designer=No. 172 Plant, F. F. Petrov
design_date=1938-1940
manufacturer=No. 172 Plant, No. 352 Plant
production_date=1940-1941
number=139
variants=
weight=combat: 4,000 kg
(8,818 lbs)
travel: 4,300 kg
(9,480 lbs)
length=8.09 m (26.54 ft)
part_length=bore: 4.47 m / 41.8 calibers
overall: 4.6 m / 43 calibers
width=2.20 m (7.21 ft)
height=1.92 m (6.29 ft)
crew=8
cartridge=
caliber=106.7 mm (4.21 in)
action=
rate=6-7 rounds per minute
velocity=
range=
max_range=
feed=
sights=
breech=interrupted screw
recoil=
carriage=split trail
elevation=-4.5° to 45°
traverse=60°
blade_type=
hilt_type=
sheath_type=
head_type=
haft_type=
diameter=
filling=
filling_weight=
detonation=
yield=
armour=
primary_armament=
secondary_armament=
engine=
engine_power=
pw_ratio=
suspension=
vehicle_range=
speed=107 mm divisional gun M1940 (M-60) ( _ru. 107-мм дивизионная пушка образца 1940 года (М-60)) was a Soviet artillery piece, developed in late 1930s in order to provide Soviet divisional artillery with powerful field and anti-tank gun. The weapon entered production in 1940, but soon after the outbreak of the Great Patriotic War the production ceased; only a limited number of pieces were built. These guns saw service in the
Red Army during the war.Development
Background
Until the late 1930s, Soviet divisional artillery consisted of three inch (76.2 mm) guns, designed to use the same model 1900 cartridge case, complemented by 122 mm howitzers. The reason for continued reliance on the 76 mm caliber was that the USSR had a large supply of three inch ammunition, some delivered during
World War I , and possessed suitable manufacturing equipment. Various improvements inmetallurgy ,chemistry , and ordnance design allowed the production of guns such as USV and ZiS-3, which were superior to the older ones in many respects, being lighter and featuring modern split trail carriages. However, all these improvements could not remedy the inherent weakness of the existing high explosive shell. The three inch caliber was chosen by the Russian Imperial Army prior to thetrench warfare era for its sufficientshrapnel performance; but high explosive shells of the caliber contained relatively small amount (typically some 600-700 grams) of explosives and were only moderately effective against field fortifications.Work on 95 mm guns
The decision to initiate development of larger caliber divisional guns was made in the second half of 1937.Shirokorad - "Encyclopedia of the Soviet Artillery".] Late that year the 95 mm caliber was proposed. On
10 March 1938 the Main Directorate of Artillery (GAU) initiated work on a 95 mm divisional gun at theKirov Plant and No. 92 Plant. The former quickly abandoned the development, but the UZTM quickly joined the program. Both guns were supposed to have a companion piece in form of the 122 mm howitzer.The UZTM project, U-4, used the same carriage as the 122 mm howitzer U-2; the development was never completed. At the No. 92 Plant, the team headed by V. G. Grabin developed a gun designated F-28, based on the carriage of the 122 mm howitzer F-25. The first prototype was ready in December 1938, even before the project was officially approved by GAU on
23 March 1939 . The F-28 reached ground trials on12 February 1940 . However, in the spring of 1940 all work on the 95 mm pieces was canceled due to a decision to adopt even larger calibers for divisional artillery.Work on 107 mm guns
GAU decided to start working on 107 mm divisional guns in the autumn of 1938. The reason typically cited for this decision was the reluctance to introduce a new caliber, such as 95 mm. The 107 mm caliber was used by both the Russian Imperial Army and the Red Army; Soviet industry manufactured 107 mm guns (
107 mm gun M1910/30 ) and ammunition, so the transition from 76 mm guns would be simpler and cheaper. One problem of using such a large caliber was the significant increase in weight. However, it was deemed possible to develop a powerful 107 mm gun in the same weight category as the 4-ton152 mm howitzer M1938 (M-10) , which, when adopted in 1939, was considered sufficiently mobile for a divisional piece.In 1940 GAU already had another incentive in the form of intelligence reports (in fact incorrect) about the
Wehrmacht adopting new tanks with thicker armor. The head of GAU,Grigory Kulik , questioned the ability of the existing 45 mm anti-tank and 76 mm divisional artillery to fight these new vehicles. This concern eventually led to the adoption of much more powerful 57 mm anti-tank and 107 mm divisional pieces by the Red Army. These new guns were not designed to fully replace the 45 mm and 76 mm ones, but to complement them.On
14 October 1938 the No. 172 Plant received a technical requirement for a 107 mm piece. The gun was developed in three variants, designated M-25, M-45 and M-60. The former two utilized the carriage of the M-10 howitzer; the prototypes successfully passed trials, but in the end the new M-60 was preferred. Initially, the M-60 was also being developed in two variants, which differed in the arrangement for transportation - in one variant, the barrel was pulled back, while in the other the upper carriage was rotated 180 degrees. Of these, the former was selected. On13 December 1939 the prototypes reached ground trials, which continued until23 April 1940 . After some improvements, the gun successfully passed army trials between 11 and25 October 1940 and was adopted as the 107 mm universal high power divisional gun M1940.After the cancellation of the F-28 project, the design bureau of the No. 92 Plant also worked on a 107 mm gun. Late in 1940 the plant produced a ZiS-24 prototype, featuring a very long 73.5 caliber barrel placed on the carriage of
152 mm howitzer-gun M1937 (ML-20) . While very powerful, the gun was also very heavy and expensive, and the project was abandoned. Later the same design bureau worked on another 107 mm gun, which combined the carriage of M-60 and a barrel with identical ballistics to the ZiS-6 anti-tank gun. After the outbreak of theGreat Patriotic War the project was canceled.There was also an attempt to develop a
casemate gun based on the M-60. The technical requirements were approved on27 July 1940 . The design bureau of the "No. 352 Plant" worked on the project from22 September . This project, too, was canceled due to the outbreak of the war.Production
The gun entered production at the No. 352 Plant in
Novocherkassk and at the No. 172 Plant. The former contributed 25 pieces in 1940 and further 101 in 1941; the latter 11 pieces in 1941.Soon after the outbreak of the Great Patriotic War, production ceased for the following reasons:
*A shortage of powerful artillery tractors meant divisional artillery would have difficulty in transporting the heavy gun;
*Thecorps level artillery was disbanded with the disbanding of rifle corps;
*No immediate need for a heavy gun with good anti-tank performance was felt;
*The gun was complicated in production and demanding in maintenance;
*Finally, in the extreme circumstances of 1941, the Soviet Union did not have any spare industrial capacity for the M-60.Description
The barrel consisted of a loose
liner and jacket which was screwed into a breech; thebreechblock was of theinterrupted screw type, borrowed from the122 mm howitzer M1910/30 . The variable length recoil system consisted of a hydraulic recoil buffer and hydropneumatic recuperator. The gun was fitted with segment-type elevation gear and screw-type traverse gear. The carriage was of split trail type, with trolleybus-type wheels with rubber tires. To protect the crew from small arms and shell fragments, a shield was fitted.In traveling position, the barrel was pulled back. Short-range transportation with the barrel in the original position was permitted, as long as the speed did not exceed 6-7 km/h.
Organization and service
Despite being developed as a divisional gun, the M-60 was never used by Red Army rifle divisions. In 1941, the M-60 guns served in anti-tank artillery
brigade s; according to the official organization, these consisted of tworegiment s, each with abattalion of M-60 (12 pieces) and two battalions of 85 mm anti-aircraft guns, with both types of weapons employed as heavy anti-tank guns. In practice, most of the brigades never received their 107 mm guns. Late in 1941 these brigades were disbanded and the surviving M-60 were used in independent 12-gun battalions.Ivanov - "Artillery of the USSR in Second World War".]In 1943 rifle corps were reintroduced. Corps artillery regiments received most of the surviving 107 mm guns, along with 122 mm guns and 152 mm howitzers; in total, each regiment had 16-20 pieces."Military History Journal", no 5, 2005.]
Since the M-60 was a limited production weapon, reports about its actual use in combat are rare. Some saw action in the
Battle of Kursk , by the Central Front forces.Kolomiets, Svirin - "The Kursk Salient".] Six M-60 guns were used during the liberation ofSevastopol in 1944.A few pieces were captured by
Wehrmacht ; the guns were designated "10.7 cm K 353(r)" by the Germans.A surviving piece can be seen in the Artillery Museum in
Saint Petersburg .ummary
The German attack in 1941 led to a situation in which the Soviet Union had neither the requirement for a weapon like the M-60 nor the industrial capacity for its production. As a result, only a limited number of pieces were supplied to the Red Army.
The M-60 was the last 107 mm piece adopted by the Red Army. Although in 1943 another 107 mm gun, the 9S-1, was developed, it never reached production. Until the end of the war, the divisional artillery continued to rely on 76 mm guns (in conjunction with 122 mm howitzers), while larger formations employed heavier, more powerful weapons such as the 122 mm A-19. When a need for very powerful anti-tank gun resurfaced later in the war, the 100 mm BS-3 was developed. Unlike the M-60, the BS-3 used fixed ammunition, resulting in better rate of fire; the BS-3 was also lighter (3.6 tons) and had a shorter deploymeny time because its barrel was not pulled back for transportation. However, the use of fixed rounds - and a limited assortment of 100 mm ammunition - made it less useful as a field gun. In 1945 another weapon intended for similar role was adopted, in the form of the
85 mm gun D-44 .For the sake of comparison, the standard German 105 mm gun, the 10.5 cm sK 18, had similar characteristics. It somewhat surpassed the M-60 in range (19 km, or 21 km for a modernized K 18/40), but was much heavier at about six tons. The German gun also fired slightly lighter (15 kg) shell.Shirokorad - "The God of War of The Third Reich".]
Another comparable weapon was the British
BL 4.5 inch Medium Field Gun . Although much heavier than the M-60, it fired a 25 kg projectile to the range of nearly 19 km.Ammunition
The M-60 fired separately loaded ammunition, with propellant charge in cartridge. Projectiles used by the older M1910/30 could be utilized, but with different cartridge case and propellant charge. Three different charges - full, first and second - were used.
The explosion of the OF-420 shell, with the fuse set to the fragmentation action, resulted in a damage to 90% of targets in the 14 to 6 meters area and to 50% of targets in 42 to 20 meters area. When the fuse was set to high explosive action, the shell created a crater 1-1.5 m in diameter and 40-60 cm deep in an average soil.
Wikimedia Foundation. 2010.