- IEEE 802.11b-1999
IEEE 802.11b-1999 or 802.11b, is an amendment to the
IEEE 802.11 specification that extended throughput to up to 11Mbit/s using the same 2.4GHz band. This specification under the marketing name ofWi-Fi has been implemented all over the world. The amendment has been incorporated into the published IEEE 802.11-2007 standard.802.11 is a set ofIEEE standards that govern wireless networking transmission methods. They are commonly used today in their802.11a ,802.11b , and802.11g versions to provide wireless connectivity in the home, office and some commercial establishments.Description
802.11b has a maximum raw data rate of 11 Mbit/s and uses the same CSMA/CA media access method defined in the original standard. Due to the CSMA/CA protocol overhead, in practice the maximum 802.11b throughput that an application can achieve is about 5.9 Mbit/s using TCP and 7.1 Mbit/s using UDP.
802.11b products appeared on the market in early 2000, since 802.11b is a direct extension of the DSSS (Direct-sequence spread spectrum) modulation technique defined in the original standard. Technically, the 802.11b standard uses
Complementary code keying (CCK) as its modulation technique. The dramatic increase in throughput of 802.11b (compared to the original standard) along with simultaneous substantial price reductions led to the rapid acceptance of 802.11b as the definitive wireless LAN technology.802.11b devices suffer interference from other products operating in the 2.4 GHz band. Devices operating in the 2.4 GHz range include: microwave ovens, Bluetooth devices, baby monitors and cordless telephones. Interference issues, and user density problems within the 2.4 GHz band have become a major concern and frustration for users.
Range
802.11b is used in a
point-to-multipoint configuration, wherein anaccess point communicates via an omni-directional antenna with one or more nomadic or mobile clients that are located in a coverage area around the access point. Typical indoor range is 30 m (100 ft) at 11 Mbit/s and 90 m (300 ft) at 1 Mbit/s. The overall bandwidth is dynamically demand shared across all the users on a channel. With high-gain external antennas, the protocol can also be used in fixed point-to-point arrangements, typically at ranges up to 8kilometer s (5mile s) although someWho|date=December 2007 report success at ranges up to 80–120 km (50–75 miles) where line of sight can be established. This is usually done in place of costlyleased line s or very cumbersomemicrowave communications equipment. Designers of such installations who wish to remain within the law must however be careful about legal limitations oneffective radiated power .cite web |url=http://a257.g.akamaitech.net/7/257/2422/13nov20061500/edocket.access.gpo.gov/cfr_2006/octqtr/pdf/47cfr15.247.pdf |accessdate=2008-01-09 |date=2006-10-01 |title=Code of Federal Regulations, Title 47-Telecommunications, Chapter I-Federal Communications Commision, Part 15-Radio Frequency Devices, Section 15.247]802.11b cards can operate at 11 Mbit/s, but will scale back to 5.5, then 2, then 1 Mbit/s (also known as Adaptive Rate Selection), if signal quality becomes an issue.
Comparison chart
ee also
*
IEEE 802.11
*IEEE 802.11g-2003
*Wi-Fi
*List of WLAN channels References
*
*
Wikimedia Foundation. 2010.