Scaly Mountain, North Carolina

Scaly Mountain, North Carolina

Scaly Mountain is a small unincorporated community along North Carolina highway 106, southwest of Highlands, North Carolina and northeast of Dillard, Georgia (about halfway between the two), and nearest to Sky Valley, Georgia just to the south-southwest. It is in far south-southeast Macon County, North Carolina, in far southwestern Highlands township, close to the Georgia and North Carolina state line.

Scaly Mountain itself (formerly "Ski Scaly") is more like a large hill than a mountain, and was used for skiing until early 2004, when it reopened in December as a weekend snow tubing venue only. Nearby Sky Valley Resort also ceased being the only ski area in Georgia around the same time, due in large part to repeatedly warm winters since the mid-1990s, unlike the 1970s and 1980s in and after which they were founded. Both areas were opened due to their proximity to and accessibility from metro Atlanta, whose upscale north and northeastern suburbs lie roughly just 100 miles or 150 kilometers to the southwest, and have since crept ever-closer.

Scaly has three trails, one double-chair ski lift, and two ski tows spread across just 12 acres or 5 hectares. The vertical rise is just convert|223|ft|m, from an elevation of convert|3802|ft|m at the base to convert|4026|ft|m at the top. Average annual snowfall is convert|38.2|in|cm, but the entire usable area is covered by snowmaking. [http://www.skicow.com/ski/Scaly-Mountain/1439] [http://www.skisoutheast.com/scaly_mountain/] It is open from the day after Christmas (December 26) on weekends only, while weather conditions permit, usually into February.

External links

* [http://www.scalymountain.com Scaly Mountain tubing official site]


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Scaly Mountain (Carolina del Norte) — Scaly Mountain Área no incorporada de los Estados Unidos …   Wikipedia Español

  • Highlands, North Carolina — Infobox Settlement official name = Highlands, North Carolina settlement type = Town nickname = Elevation 4118 motto = Above it all [ [http://www.highlandschamber.org/ Highlands Chamber of Commerce website] ] imagesize = 250px image caption = The… …   Wikipedia

  • North Carolina Highway 106 and Georgia State Route 246 — North Carolina Highway 106 Georgia State Route 246 …   Wikipedia

  • North Carolina Highway 106 - Georgia State Route 246 — Infobox road state=GA type= route=246 length mi=5 length ref= length round=0 established= direction a=East direction b=West starting terminus= junction= ending terminus= city limit counties=Rabun previous route=245 next route=247Infobox road… …   Wikipedia

  • Macon County, North Carolina — Infobox U.S. County county = Macon County state = North Carolina map size = 250 founded = 1828 seat = Franklin | area total sq mi =519 area water sq mi =3 area percentage = 0.58% census yr = 2000 pop = 29811 density km2 =22 web = www.maconnc.org… …   Wikipedia

  • National Register of Historic Places listings in Macon County, North Carolina — Map of all coordinates from Google Map of all coordinates from Bing …   Wikipedia

  • Oak Grove, Macon County, North Carolina — Oak Grove is an unincorporated community in Macon County, North Carolina, on North Carolina Highway 28, north northwest of Franklin, North Carolina. It lies at an elevation of 1988 feet (606 m). Coordinates: 35°16′48″N 83°26′49″W /  …   Wikipedia

  • North American Beaver — Castor canadensis Conservation status Least Concern ( …   Wikipedia

  • Condado de Macon (Carolina del Norte) — Para otros usos de este término, véase Condado de Macon. Condado de Macon Condado de los Estados Unidos …   Wikipedia Español

  • Jonathan Williams (poet) — Jonathan Williams (March 8, 1929 March 16, 2008) was an American poet, publisher, essayist, and photographer. He is known as the founder of The Jargon Society , which has published poetry, experimental fiction, photography, and folk art for more… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”