- Transistor computer
A Transistor computer was a
computer which usedtransistor s instead ofvacuum tube s. The "first generation" of electronic computers used vacuum tubes, which generated large amounts of heat, were bulky, and were unreliable. A "second generation" of computers, through the late 1950s and 1960s featured boards filled with individual transistors and magnetic memory cores.The first transistor computer
The
University of Manchester 's experimental Transistor Computer was first operational in November 1953 and it is believed to be the first transistor computer to come into operation anywhere in the world. There were two versions of the Transistor Computer, the prototype, operational in 1953, and the full-size version, commissioned in April 1955.torage
The only storage used was a drum (rescued from the
Manchester Mark I ). This meant that the averagerandom access time to a word in store was half a drum revolution, i.e., with 64 words on a track, 32 times the random access time for a word if it could be stored in a trueRAM . So the Transistor Computer was slower than the Mark 1. Both versions had a pseudo 2-address (or 1+1) instruction format, where the address of the next instruction to be obeyed was contained within each instruction, to facilitate "optimum programming". The drum was even used to store the Accumulator and the Current Instruction. Each used a track of its own on the drum, and a special "regenerative" system to ensure that access time was fast. The word length was 44-bit s, divided into 4 "syllables" for an instruction.The prototype computer (Nov. 1953) had a simple 7 function order code and one track of 64 words for main storage. For the full-size computer (Apr 1955) the order code and storage were much extended and a hardware multiplier included. A third "regenerative" drum track formed an 8-word B store. This provided a set of registers with faster access times, which could be used both for instruction modification and any arithmetic or logical operation except multiplication. Arithmetic was serial, with a pulse rate of 125,000 per second. The instruction times were directly related to the 30 millisecond drum revolution time (the basic unit being the time to read a word, i.e. 1/64th of a revolution).
Reliability problem
The 1955 machine had a total of 200
point-contact transistor s and 1300 point diodes and had a power consumption of 150 watts. There were considerable reliabilty problems with the early batches of transistors and the average error free run in 1955 was only 1.5 hours.Full-size transistor computer
The design of the full-size Transistor Computer was subsequently adopted by the
Manchester firm ofMetropolitan-Vickers , who changed all the circuits to more reliable types of junction transistors. The production version was known as theMetrovick 950 (MV950) and was completed in 1956. Six machines were made, all for internal use within the company.The most important impact of the Transistor Computer was it provided early experience in transistor circuit techniques.
External links
* [http://www.computer50.org/kgill/transistor/trans.html The first transistor computer] Virtual Museum of Manchester Computing
Wikimedia Foundation. 2010.