Category 3 cable

Category 3 cable

Category 3 cable, commonly known as Cat 3, is an unshielded twisted pair (UTP) cable designed to reliably carry data up to 10 Mbit/s, with a possible bandwidth of 16 MHz. It is part of a family of copper cabling standards defined jointly by the Electronic Industries Alliance and the Telecommunications Industry Association.

Category 3 was a popular cabling format among computer network administrators in the early 1990s, but fell out of popularity in favor of the very similar, but higher performing, Cat 5 standard. Presently, most new structured cable installations are built with Cat 5e or Cat 6 cable. Cat 3 is currently still in use in two-line telephone systems, and can easily be adapted to run VoIP (as long as you create a dedicated LAN for your VoIP telephone sets). While Cat 5 or higher is often recommended for VoIP, the reality is that the 10 Mbit/s bandwidth a cat 3 network can provide is far more than the 0.08 Mbit/s a VoIP phone needs at full load, and Cat 3 is even compatible with 802.3af PoE.

Note that unlike Cat 1, 2, 4, and 5 cables, Cat 3 is still recognized by TIA/EIA-568-B, its defining standard.

The newer 100BASE-T4 standard, which achieves speeds of 100 Mbit/s by using all 4 pairs of wires, allowed older Cat 3 based infrastructures to achieve a much higher bandwidth.

Advantages over Category 5 cable

Category 3 cable is available in up to 25 pairs, while category 5 cable is only available in 4 pairs. In homes and small offices, 100 megabit transmission is sufficient. The popular 100base-T standard works reliably up to 75m over 2 cat 3 pairs, while Marvell's new 100c3 standard works reliably up to 150m over just 1 cat 3 pair. Category 3 is therefore sufficient at this speed and offers more links per cable, greatly reducing the number of cables needed. When retrofitting homes with existing walls and no conduits this is a huge advantage.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Category 6 cable — Category 6 cable, commonly referred to as Cat 6, is a cable standard for Gigabit Ethernet and other network protocols that is backward compatible with the Category 5/5e and Category 3 cable standards. Cat 6 features more stringent specifications… …   Wikipedia

  • Category 5 cable — Category 5 cable, commonly known as Cat 5, is a twisted pair cable type designed for high signal integrity. Many such cables are unshielded but some are shielded. Category 5 has been superseded by the Category 5e specification. This type of cable …   Wikipedia

  • Category 7 cable — (CAT7), (ISO/IEC 11801:2002 category 7/class F), is a cable standard for Ethernet and other interconnect technologies that can be made to be backwards compatible with traditional CAT5 and CAT6 Ethernet cable. CAT7 features even more strict… …   Wikipedia

  • Category 2 cable — Category 2 cable, or simply Cat 2, is a misnomer, probably adopted by those who assumed that TIA set up Categories for all types of cables originally defined by Anixter, the distributor, under the grades called Levels. TIA 568 only recognized… …   Wikipedia

  • Category 1 cable — (Cat 1) a.k.a. voice grade copper is a misnomer, probably adopted by those who assumed that TIA set up Categories for all types of cables originally defined by Anixter, the distributor, under the grades called Levels. TIA 568 only recognized… …   Wikipedia

  • Category 4 cable — Category 4 is a description of a cable that consists of four unshielded twisted pair (UTP) wires with a data rate of 16 Mbit/s and performance of up to 20 MHz. It was used in token ring networks, 10BASE T, 100BASE T4, and is no longer common or… …   Wikipedia

  • Category 6 cable — …   Википедия

  • Category 5 cable — …   Википедия

  • Câble catégorie 7 — Category 7 cable Le câble catégorie 7 de classe 7 est spécifié par la norme ISO/IEC 11801:2002 qui est relative au câblage de type Ethernet. Celui ci est rétrocompatible avec les câbles catégorie 5 et 6 et permet la transmission de données à des… …   Wikipédia en Français

  • Cable de categoría 6 — Cable de categoría 6, o Cat 6 (ANSI/TIA/EIA 568 B.2 1) es un estándar de cables para Gigabit Ethernet y otros protocolos de redes que es retrocompatible con los estándares de categoría 5/5e y categoría 3. La categoría 6 posee características y… …   Wikipedia Español

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”