Linear stage

Linear stage

A linear stage or translation stage is a component of a motion system used to restrict an object to a single axis of motion. The term linear slide is often used interchangeably with "linear stage", though technically "linear slide" refers to a linear motion bearing, which is only a component of a linear stage. All linear stages consist of a platform and a base, joined by some form of guide or linear bearing in such a way that the platform is restricted to linear motion with respect to the base. In common usage, the term linear stage may or may not also include the mechanism by which the position of the platform is controlled relative to the base.

Principle of operation

In three dimensional space, an object may either rotate about, or translate along any of three axes. Thus the object is said to have six degrees of freedom (3 rotational and 3 translational). A linear stage exhibits only one degree of freedom (translation along one axis). In other words, linear stages operate by physically restricting 3 axes of rotation and 2 axes of translation.

Guide types

Linear stages consist of a platform that moves relative to a base. The platform and base are joined by some form of guide which restricts motion of the platform to only one dimension. A variety of different styles of guides are used, each with benefits and drawbacks making each guide type more appropriate for some applications than for others.

Ball bearing

;Benefits: Inexpensive.;Drawbacks: Short travel (limited by length of bearing contact), low load capacity, poor accuracy, short lifetime.;Applications: Optics lab stages, drawer slides.

Recirculating ball bearing

;Benefits: Unlimited travel, relatively inexpensive.;Drawbacks: Low load capacity, quick to wear, oscillating positioning load as bearings recirculate.;Applications:

Crossed roller bearing

;Benefits: High load capacity, good accuracy, long lifetime.;Drawbacks: Short travel (limited by length of bearing contact), expensive.;Applications: Microscope stages, optics lab stages.


;Benefits: Excellent accuracy, no backlash, no wear (infinite lifetime).;Drawbacks: Short travel (limited by flexure range), low load capacity, expensive.;Applications: Optic fiber alignment.

Cylindrical sleeve

;Benefits: High load capacity, unlimited travel, inexpensive.;Drawbacks: Susceptible to binding if bending moments are present.;Applications: Radial arm saws, scanners, printers.


;Benefits: Highest load capacity, unlimited travel, long lifetime, inexpensive.;Drawbacks: High positioning force required, susceptible to binding if bending moments are present, high backlash.;Applications: Machine shop equipment (ex. mill and lathe tables).

Position control methods

The position of the moving platform relative to the fixed base is typically controlled by a linear actuator of some form, whether manual, motorized, or hydraulic/pneumatic. The most common method is to incorporate a lead screw passing through a lead nut in the platform. The rotation of such a lead screw may be controlled either manually or by a motor.


In manual linear stages, a control knob attached to a lead screw is typically used. The knob may be indexed to indicate it's angular position. The linear displacement of the stage is related to the angular displacement of the knob by the lead screw pitch. For example if the lead screw pitch is 0.5 mm then one full revolution of the knob will move the stage platform 0.5 mm relative to the stage base. If the knob has 50 index marks around its circumference, then each index division is equivalent to 0.01 mm of linear motion of the stage platform.

Precision stages such as those used for optics do not use a lead screw, but instead use a fine-pitch screw or a micrometer which presses on a hardened metal pad on the stage platform. Rotating the screw or micrometer pushes the platform forward. A spring provides restoring force to keep the platform in contact with the actuator. This provides more precise motion of the stage. Stages designed to be mounted vertically use a slightly different arrangement, where the actuator is attached to the movable platform and its tip rests on a metal pad on the fixed base. This allows the weight of the platform and its load to be supported by the actuator rather than the spring.

Stepper motor

In some automated stages a stepper motor may be used in place of, or in addition to a manual knob. A stepper motor moves in fixed increments called steps. In this sense it behaves very much like an indexed knob. If the lead screw pitch is 0.5 mm and the stepper motor has 200 steps per revolution (as is common), then each revolution of the motor will result in 0.5 mm of linear motion of the stage platform, and each step will result in 0.0025 mm of linear motion.

DC motor with encoder

In other automated stages a DC motor may be used in place of a manual control knob. A DC motor does not move in fixed increments. Therefore an alternate means is required to determine stage position. A scale may be attached to the internals of the stage and an encoder used to measure the position of the stage relative to the scale and report this to the motor controller, allowing a motion controller to reliably and repeatably move the stage to set positions.

Multiple axis stage configurations

For position control in more than one direction, multiple linear stages may be used together. A "two-axis" or "X-Y" stage can be assembled from two linear stages, one mounted to the platform of the other such that the axis of motion of the second stage is perpendicular to that of the first. A two-axis stage with which many people are familiar is a microscope stage, used to position a slide under a lens. A "three-axis" or "X-Y-Z" stage is composed of three linear stages mounted to each other (often with the use of an additional angle bracket) such that the axes of motion of all stages are orthogonal. Some two-axis and three-axis stages are integrated designs rather than being assembled from separate single-axis stages. Some multiple-axis stages also include rotary or tilt elements such as rotary stages or positioning goniometers. By combining linear and rotary elements in various ways, four-axis, five-axis, and six-axis stages are also possible.


Linear Slide, Nano Linear Stage, Nano Positioning Linear Stage, Ultra Precision Machining Linear Stage

See also

*Linear motion bearing


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Linear actuator — TOC A linear actuator is a device that develops force and motion, from an available energy source, in a linear manner, as opposed to rotationally like an electric motor. There are various methods of achieving this linear motion. Several different …   Wikipedia

  • Linear-motion bearing — A linear motion bearing or slide is a bearing designed to provide free motion in one dimension. There are many different types of linear motion bearings and this family of products is generally broken down into two sub categories: rolling element …   Wikipedia

  • Linear discriminant analysis — (LDA) and the related Fisher s linear discriminant are methods used in statistics, pattern recognition and machine learning to find a linear combination of features which characterize or separate two or more classes of objects or events. The… …   Wikipedia

  • Linear regression — Example of simple linear regression, which has one independent variable In statistics, linear regression is an approach to modeling the relationship between a scalar variable y and one or more explanatory variables denoted X. The case of one… …   Wikipedia

  • Linear Pottery culture — LBK redirects here. For other uses, see LBK (disambiguation). Not to be confused with Linear B. Map of European Neolithic at the apogee of Danubian expansion, c. 4500–4000 BC …   Wikipedia

  • Linear regulator — In electronics, a linear regulator is a voltage regulator based on an active device (such as a bipolar junction transistor, field effect transistor or vacuum tube) operating in its linear region (in contrast, a switching regulator is based on a… …   Wikipedia

  • Linear multistep method — Adams method redirects here. For the electoral apportionment method, see Method of smallest divisors. Linear multistep methods are used for the numerical solution of ordinary differential equations. Conceptually, a numerical method starts from an …   Wikipedia

  • linear — [[t]lɪ̱niə(r)[/t]] 1) ADJ: usu ADJ n A linear process or development is one in which something changes or progresses straight from one stage to another, and has a starting point and an ending point. Her novel subverts the conventions of linear… …   English dictionary

  • linear — lin|e|ar [ˈlıniə US ər] adj 1.) consisting of lines, or in the form of a straight line ▪ a linear diagram 2.) [only before noun] relating to length ▪ linear measurements 3.) involving a series of connected events, ideas etc, that move or progress …   Dictionary of contemporary English

  • Rotary stage — A rotary stage is a component of a motion system used to restrict an object to a single axis of rotation. The terms rotary table or rotation stage are often used interchangeably with rotary stage. All rotary stages consists of a platform and a… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”