Hai (keelboat)

Hai ("Shark", in French Requin) is one-design, sloop-rigged keelboat designed in Finland. It was designed in 1930 by Finnish sailboat designer Gunnar L. Stenbäck as a cheap, racing and cruising yacht suitable for mass production. It remains a popular small yacht in Finland and France.

History

In 1920s, one-design yacht classes were relatively scarce and dominating form of yacht racing were various construction classes, which' boats were designed and built one at the time, and thus were quite expensive. Many Nordic top sailors and designers expressed concern about the future of the sport, and Stenbäck argued strongly that only in one-design class the costs could be kept suitably low. As a result, Hai design specified inexpensive materials (Northern pine and oak, iron ballast instead of lead) and relatively small sail area so that winches were not required. Keel was long and shallow, to ensure safety on rocky Baltic waters.

Stenbäck presented his design in 1930; first boat was built and presented to public next year and the design soon proved popular and many yards began constructing the class. Boats were also exported; around 100 boats to France, some thirty to USA and also to Germany, Sweden and Baltic countries. [http://www.woodenboatworldfinland.com/hai_english4.htm] However, class rules requirement of Finnish made sails slowed down growth abroad and although this was later relaxed, no international class association was ever set up. After World War II, Hai faced stiff competition from Nordic Folkboat and Dragon (which was accepted as Olympic class) and it never achieved same international status. However, it was biggest keelboat class in Finland until 1960s, when it was supplanted by H-boat. Despite this, it remains an active competition class and construction of new boats has continued to the day, although in dwindling numbers. In total, around 290 boats have been registered in Finland. Finnish Hai is somewhat unique in that it has remained very similar to its original form, with wooden hulls and spars - GRP boats are not allowed.

French Requin

In France the boat (known as "Requin") gained large following and to date, nearly 500 boats have been registered. Owing to lack of authoritative international class association, Requin evolved independently from Finnish class. Plastic is nowadays allowed as hull material, as is aluminium for spars. Sail area is also significantly larger: 22.1m² for mainsail and 6.93m² for jib. Genoa is also allowed in Requin.

Hai 2000

A modernized Finnish GRP variant of Hai; hull based on Requin, aluminium spar. Mainsail 16.5m², jib 9.5m², spinnaker 36m². Some wooden Hai boats have also been rigged for Hai 2000 class.

International Competition

Though as noted, Hai has never been a major international competition class, some regattas between boats from different countries have been organized, especially in 1930s when boat was gaining popularity around Baltic, but also in recent years, featuring boats from Finland, Germany and France.

"Note": This class is not to be confused with Canadian Shark 24 class.

External links

* [http://requin.levillage.org/ "Requin" class association]
* [http://www.puuvene.net/hai/history/hai_english.htm History of "Hai" (in English)]
* [http://www.jakobstadsbatvarv.multi.fi/ Jakobstads Båtvarv, builder of wooden Hai-boats]

References