Cementation process

The cementation process is an obsolete technique for making steel by carburization of iron. Unlike modern steelmaking it increased the amount of carbon in the iron. It was apparently developed before the 17th century.

Origins

The process probably originated in Bohemia in the 16th century and was in use in Bavaria in 1601. The process was patented in England by William Ellyot and Mathias Meysey in 1614. At that date, the "invention" could consist merely of the introduction of a new industry or product, or even a mere monopoly. They evidently soon transferred the patent to Sir Basil Brooke, but he was forced to surrender it in 1619. A clause in the patent prohibiting the import of steel was found to be undesirable because he could not supply as much good steel as was needed.

Brooke's furnaces were probably in his manor of Madeley at Coalbrookdale (which certainly existed before the English Civil War) and which have recently been excavated. He probably used bar iron from the Forest of Dean, where he was a partner in farming the King's ironworks there at two periods. By 1631, it was recognised that Swedish iron was the best raw material and then or later particularly certain marks (brands) such as "double bullett" from Österby (so called from the mark OO) and Leufsta (now Lövsta), whose "hoop L" mark consisted of an L in a circle, both belonging to Louis De Geer and his descendants. These were among the first ironworks in Sweden to use the Walloon process of fining iron, producing what was known in England as oregrounds iron. It was so called from the Swedish port of Öregrund, north of Stockholm, in whose hinterland most of the ironworks lay. The ore used came ultimately from the Dannemora mine.

Process

The process begins with wrought iron and charcoal. It uses one or more long stone "pots" inside a furnace. Typically, in Sheffield, each was 14 feet by 4 feet and 3.5 feet deep. Iron bars and charcoal are packed in alternating layers, with a top layer of charcoal and then refractory matter to make the pot or "coffin" airtight. Some manufacturers used a mix of powdered charcoal, soot and mineral salts, called "cement powder"—which gave the process its name. In larger works up to 16 tons of iron was treated in each cycle.

Depending on the thickness of the iron bars, the pots were then heated from below for a week or more. Bars were regularly examined and when the correct condition was reached the heat was withdrawn and the pots were left until cool—usually around fourteen days. The iron had "gained" a little over 1% in mass from the carbon in the charcoal, and had become heterogeneous bars of "blister steel".

The bars were then shortened, bound, heated and hammered, pressed or rolled to become "shear steel". Alternatively they could be broken up and melted in a crucible using a crucible furnace with a flux to become "crucible steel" or "cast steel", a process devised by Benjamin Huntsman in the 1740s.

Cementation process for brass

In the early modern period, brass, an alloy of copper and zinc, was usually produced by a cementation process in which metallic copper was heated with calamine, a zinc ore. For details of this see calamine brass.

References

*K. C. Barraclough, "Steel before Bessemer I: Blister Steel: The Birth of an Industry" (1985).
*K. C. Barraclough, "Swedish Iron and Sheffield Steel", "History of Technology" 12 (1990), 1–39.
*P. W. King, "The Cartel in Oregrounds Iron", "Journal of Industrial History" 6 (2003), 25–48.
*R. J. MacKenzie and J. A Whiteman, "Why pay more? An archaeometallurgical examination of 19th century Swedish Wrought iron and Sheffield blister steel", "Historical Metallurgy" 40(2) (2006), 138–49.