10PASS-TS

10PASS-TS

10PASS-TS is an IEEE 802.3-2005 Physical Layer (PHY) specification for a full-duplex short reach point-to-point Ethernet link over voice-grade copper wiring.

10PASS-TS PHYs deliver a minimum of 10 Mbit/s over distances of up to 750 meters (2460 ft), using ITU-T G.993.1 (VDSL) technology over a single copper pair. These PHYs may also support an optional aggregation or bonding of multiple copper pairs, called PME Aggregation Function (PAF).

Unlike 10BASE-T, 100BASE-T and 1000BASE-T PHYs, providing a single rate of 10, 100 or 1000 Mbit/s respectively, 10PASS-TS link rate can vary, depending on the copper channel characteristics, such as length, wire diameter (gauge), number of pairs if the link is aggregated etc.

History

See EFM History.

10PASS-TS equipment manufacturers

10PASS-TS chip vendors

* Infineon Technologies AG (http://www.infineon.com)
* Ikanos (http://www.ikanos.com)

ee also

* Ethernet in the First Mile
* PME Aggregation Function
* 2BASE-TL

External links

* [http://standards.ieee.org/getieee802/802.3.html Get IEEE 802.3] - "IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications", IEEE Std 802.3-2005, December 2005.
* [http://www.ieee802.org/3/ah/ IEEE 802.3ah] - Ethernet in the First Mile Task Force archive


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • 10PASS-TS — est une spécification de la couche physique (PHY) de l IEEE 802.3 2008. Elle définit les communications Ethernet full duplex sur des faibles distances en utilisant des câbles à paires torsadées de catégorie 1. 10PASS TS permet de délivrer un… …   Wikipédia en Français

  • Ethernet extender — An Ethernet extender (also network extender or LAN extender) is any device used to extend an Ethernet or network segment beyond its inherent distance limitation which is approximately 100 metres (330 ft) for most common forms of twisted pair …   Wikipedia

  • Ethernet in the First Mile — (EFM), also known as IEEE 802.3ah, is a collection of protocols specified in IEEE 802.3, defining the Ethernet in the access networks, i.e. first or last mile.With Wide, Metro and Local Area Networks already standardized, the EFM allows… …   Wikipedia

  • PME Aggregation Function — (PAF) is a mechanism defined in Clause 61 of IEEE 802.3, which allows one or more Physical Medium Entities (PMEs) to be combined together to form asingle logical Ethernet link.The PAF is located in the Physical Coding Sublayer (PCS), between the… …   Wikipedia

  • 2BASE-TL — is an IEEE 802.3 2005 Physical Layer (PHY) specification for a full duplex long reach point to point Ethernet link over voice grade copper wiring. 2BASE TL PHYs deliver a minimum of 2 Mbit/s over distances of up to 2.7 km (9 kft), using ITU T… …   Wikipedia

  • Ethernet sur le premier kilomètre — IEEE 802.3ah IEEE 802.3ah, appelée également Ethernet in the First Mile, est une norme ratifiée en juin 2004 et appartenant au standard IEEE 802.3 (Ethernet). Celle ci comprend un ensemble de protocoles définissant trois types de liaison :… …   Wikipédia en Français

  • IEEE 802.3ah — IEEE 802.3ah, appelée également Ethernet in the First Mile, est une norme ratifiée en juin 2004 et appartenant au standard IEEE 802.3 (Ethernet). Celle ci comprend un ensemble de protocoles définissant trois types de liaison : point à point… …   Wikipédia en Français

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”