Washington Iron Works Skidder

Washington Iron Works Skidder

The Washington Winch is a steam-powered logging skidder, or cable winch. It was imported to Australia in the 1920s and was initially used to move the large Jarrah logs from the forests of Western Australia. It was later sold to the Forests Commission of Victoria for salvaging timber after the 1939 Black Friday fires.

The winch is located at Swifts Creek, Victoria, and is a unique part of Victoria's cultural heritage and logging history; left intact with engine, spars and cabling still rigged for work it is the only steam powered engine of its kind in Australia. It is listed on the Victorian Heritage Register, and managed by the Department of Natural Resources and Environment.

Washington Iron Works

Washington Iron Works was a company in Seattle Washington, that built these steam skidders. Lidgerwood, Clyde, American Hoist, Skagit, Tyee, and Willamette were other builders. The company merged with Pacific Car and Foundry, which is now Kenworth Trucks. Many Washington skidders can still be seen in North America.

Washington Iron Works engines revolutionized steam logging in the 1920s and '30s. The steam-powered winches were mounted on heavy log skid frames which allowed the winch to be transported to new sites.

Operation

The Washington Winch operated either a "high lead" or a "skyline" system. The high lead system was not often used as it only partially lifted the logs off the ground, which caused the logs to become caught in rocks, and left behind a "snig track", which deepened over time. The skyline system involved two large spars (trees) used to create a "flying fox" to lift logs over the rough ground. Riggers climbed 60m up a large tree and headed the trunk, which would cause the tree to sway violently. They then secured the spar with guy cables and attached the tackle. This operation was dangerous and physically demanding, often taking a full day, with lunch sent up on a rope. The Washington Winch was used to harvest Alpine Ash which would then be used for high-value products such as furniture, flooring and architraves.

References

* [http://www.railroadinfo.com/features/Logging/loggers2.html Information panel at site]

External links

* [http://www.vannattabros.com/cable5.html Slackline Rigging]
* [http://www.vannattabros.com/cable3.html North Bend Rigging]
* [http://www.vannattabros.com/cable2.html High lead Rigging]


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Yarder — A yarder is piece of logging equipment which uses a system of cables to pull or fly logs from the stump to the landing. It generally consists of an engine, drums, and spar, but has a range of [http://www.cnr.vt.edu/visser/cable… …   Wikipedia

  • Cable logging — is a logging method primarily used on the West Coast of North America with yarder, loaders and grapple yarders.The cables can be rigged in several configurations.There are two classes.# High Lead, in which a simple loop of cable runs from the… …   Wikipedia

  • Lumberjack — A lumberjack or logger is a man who harvests lumber. The term lumberjack is somewhat archaic, having been mostly replaced by logger . When lumberjack is used, it usually refers to a logger from an earlier time before the advent of chainsaws,… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”