In telecommunications, a femtocell—originally known as an Access Point Base Station—is a small cellular base station, typically designed for use in residential or small business environments. It connects to the service provider’s network via broadband (such as DSL or cable); current designs typically support 2 to 5 mobile phones in a residential setting. A femtocell allows service providers to extend service coverage indoors, especially where access would otherwise be limited or unavailable. The femtocell incorporates the functionality of a typical base station but extends it to allow a simpler, self contained deployment; for example, a UMTS femtocell containing a Node B, RNC and GSN with Ethernet for backhaul. Although much attention is focussed on UMTS, the concept is applicable to all standards, including GSM, CDMA2000, TD-SCDMA and WiMAX solutions.

For a mobile operator, the attractions of a femtocell are improvements to both coverage and capacity, especially indoors. There may also be opportunity for new services and reduced cost. The cellular operator also benefits from the improved capacity and coverage but also can reduce both capital expenditure and operating expense.

Femtocells are an alternative way to deliver the benefits of Fixed Mobile Convergence. The distinction is that most FMC architectures require a new (dual-mode) handset which works with existing home/enterprise Wi-Fi access points, while a femtocell-based deployment will work with existing handsets but requires installation of a new access point.


In 2002, a group of engineers at Motorola in Swindon, England, started a skunkworks team, called the "AFG", to develop new technologies. Some of their major achievements included the world's smallest full-power UMTS base station, one of the first demonstrations of television to mobile, and the invention and development of the access point base station (ie. Femtocell). The original design was intended to provide a direct equivalent to a WiFi access point, but for mobile cellular (UMTS, CDMA-2000 or WiMAX). The unit contained all the core network elements and did not require a cellular core network, requiring only a data connection to the Internet or WiFi core network [Motorola Swindon Labs BTS500D Concept Document] .

By mid-2004 a number of companies were independently investigating femtocells (although mostly using other terms such as "residential base station" or "3G access point"). [ [http://disruptivewireless.blogspot.com/2007/12/femtocell-who-coined-term-and-when.html Disruptive Wireless] ]

Also in 2004, two femtocell-focussed companies were registered [Companies House File Numbers 05213514 and 05247998, respectively] at Companies House in the United Kingdom: 3Way Networks (now part of Airvana, Inc.) and Ubiquisys. By 2005, the idea had become more widely recognised with demonstrations and conference discussion. By this stage more companies were involved, including more established suppliers Samsung, Airwalk, ip. Access and RadioFrame Networks.

By early 2007, the idea had become mainstream, with a number of major companies publicly demonstrating systems at the cellular industry 3GSM conference in February, and operators announcing trials. In July, the Femto Forum trade organisation was founded to promote femtocell deployment worldwide, Fact|date=April 2008 comprising mobile operators, telecoms hardware and software vendors, content providers and start-ups. Its main work is conducted via four working groups, tackling regulatory issues, network and interoperability, radio and physical layer, and marketing and promotion.

In 3Q 2007, Sprint Nextel started a limited rollout in Denver, Indianapolis and Tennessee of a home-based UbiCell femtocell built by Samsung called the "Sprint Airave", which worked with any Sprint handset. [ [http://www2.sprint.com/mr/news_dtl.do?id=18000 Airave] ] Airave was rolled out nationwide on 17 August 2008. [ [http://blog.treonauts.com/2008/07/sprint-airave-n.html Sprint AIRAVE Nationwide Launch August 17] ]

As well as system manufacturers, semiconductor companies have announced chip-level products to address this application. Analog Devices has developed a chipset for the RF-IF and baseband, while picoChip claims significant commercial traction on their baseband Digital Signal Processorfact|date=July 2008.


Although claims are made that Femtocells could be a panacea for straightforward system deployment, there are a number of complications that need to be overcome.


The placement of a femtocell has a critical effect on the performance of the wider network, and this is one of the key issues to be addressed for successful deployment.

Without unique spectrum for the femtocell 'underlay network', or very careful spectrum planning in the wider network, there is a concern that femtocells could suffer from severe interference problems. For example, in a femtocell handover between a macrocell network to a home femtocell access point, there are limitations in the standards which must be taken into account. For example, there is a limitation in the number of adjacent cell sites - typically 16 - for which the mobile unit can scan for, measure and then pass to the RAN handover algorithm (for 2G and 3G standards, for example). Further, if a single frequency CDMA system is being operated, where the macro and femtocell network utilise the same frequency band (a typical situation for many operators who licensed only one 3G frequency band), then the power control algorithms of the macro cell and femtocell can create interference , [ [http://arxiv.org/abs/cs/0702132v7 "Uplink Capacity and Interference Avoidance for Two-Tier Femtocell Networks", Vikram Chandrasekhar and Jeffrey G. Andrews] ] where for example a mobile unit increases its transmit power to the femtocell as part of the 'near-far' power control inherent in CDMA systems, whilst it is within the coverage area of a macro unit. The resultant high power transmitter in the macro field acts as an interferer since the frequency is shared. Finally, there is the issue of coverage area, where in high-rise accommodation, femtocell users on different floors can create interference to other users. There are several partial solutions to this problem, but primarily the only way to prevent interference is to use a different frequency for the femtocell coverage, particularly for CDMA deployments. The partial solutions include utilising the mode-2 fixed power option available in the 3G configuration parameters, which would prevent the mobile unit power from increasing and causing interference, though there is an obvious performance trade-off if this approach is used.

Many vendors are reported to have developed sophisticated algorithms to address the problem, and modelling by carriers indicates this is viable.Fact|date=April 2008 As such, the trials now in place are designed to test these techniques and to determine to what degree interference is a problem and under what circumstances. In his paper for 'PIMRC 07', [Performance of Macro- and co-channel femtocells in a hierarchical cell structure", Holger Claussen, Bell Laboratories Alcatel-Lucent, The 18th Annual IEEE International Symposium on Personal, Indoor and Mobile Radio Communications 2007 (PIMRC'07)] Claussen describes the UMTS femtocell/macrocell interference problem and concludes that to manage the interference that "Essential requirements such as autoconfiguration and public access" are needed. In this case 'public access' means that all deployed femtocells using the same frequency (ie. of the same operator) would need to allow anyone to access the femtocell; there are obvious backhaul issues with this if the user is paying for the DSL or Cable backhaul connection. It is suggested in the paper that this could be offset by low cost calls. In another paper, ["Effects of user-deployed, co-channel femtocells on the call drop probability in a residential scenario", Lester T. W. Ho, Holger Claussen, Bell Laboratories Alcatel-Lucent, The 18th Annual IEEE International Symposium on Personal, Indoor and Mobile Radio Communications 2007 (PIMRC'07)] Ho and Claussen identify the pre-requisite for auto-configuration of the femtocell power level in order to reduce interference - though in Claussen's first paper the algorithm requires knowledge of the macrocell transmit power, which would require the operator to configure the femtocells centrally, and line-of-sight distance to the femtocell, which requires knowledge of where the femtocell is installed. In his second paper, Ho highlights the issue of increased network traffic due to handover messages between the macrocell and femtocell.

The 3GPP meeting reported that:"To the extent investigated so far co-channel deployment is feasible for open access. For closed access, analysis conducted so far indicates that co-channel deployment is feasible if adaptive interference mitigation techniques are used. Further work is required to summarise the trade-off between HNB performance and the impact on the macro layer and to determine whether an acceptable tradeoff can be identified". [3GPP TR 25.820 V1.0.0 (2007-11)]

A number of companies [http://www.picochip.com/downloads/PC8209ProductBrief.pdf] are using the approach of using the femtocell as a mobile phone (UE) in order to measure, synchronise and build a neighbour list of nearby base stations. From this information, power levels, spreading codes and other parameters can be determined and resolved in order to avoid interfering with existing infrastructure.


Crucially, access point base-stations operate in licensed spectrum. As licensed spectrum allocation is made to operators on a fee basis, deployment of equipment must meet the strict requirements of the licenses. To make best use of spectrum, operators use frequency and cellular planning tools to optimise the best coverage for a given amount of spectrum. The introduction of access point base stations using licensed spectrum that are sold directly to the customer has implications for frequency and cellular planning, since an unexpectedly located access point base station could interfere with other closely-located base stations.

Access control

There is also the related issue of what happens when a neighbor's mobile appliance attaches to the network using another neighbor's femtocell, or how that can be prevented from occurring.

Lawful interception

Access point base stations, in common with all other public communications systems, are, in most countries, required to comply with lawful interception requirements.

Equipment location

Other regulatory issues [ [http://www.fcc.gov/pshs/911/voip/challenges.html FCC requirements for 911 provision by VoIP providers] ] relate to the requirement in most countries for the operator of a network to be able to show exactly where each base-station is located, and for E911 requirements to provide the registered location of the equipment to the emergency services. There are issues in this regard for access point base stations sold to consumers for home installation, for example. Further, a consumer might try to carry their base station with them to a country where it is not licensed. Some manufacturers (see Ubicell) are using GPS within the equipment to lock the femtocell when it is moved to a different country; [ [http://www.engadget.com/2007/03/28/hands-on-with-the-samsung-ubicell/ Hands on with the Samsung Ubicell] ] this approach is disputed, as GPS is often unable to obtain position namely indoors because of weak signal.

Network integration

From an operational or deployment perspective, one of the key areas that needs to be considered is that of network integration. A conventional cellular network is designed to support a relatively small number (thousands, tens-of-thousands) of base stations, whereas a femtocell deployment of millions of consumer access points requires a different architecture to support this scaling. The issue of increase in network traffic as a result of co-channel macrocell / femtocell deployment is discussed in the paper by Ho and Claussen. ["Effects of user-deployed, co-channel femtocells on the call drop probability in a residential scenario", Lester T. W. Ho, Holger Claussen, Bell Laboratories Alcatel-Lucent, The 18th Annual IEEE International Symposium on Personal, Indoor and Mobile Radio Communications 2007 (PIMRC'07)]

Emergency calls

Access Point Base Stations are also required, since carrying voice calls, to provide a 911 (or 999, or 112) emergency service, as is the case for VoIP phone providers. [ [http://www.fcc.gov/pshs/911/voip/challenges.html FCC requirements for 911 provision by VoIP providers] ] This service must meet the same requirements for availability as current wired telephone systems. There are several ways to achieve this, such as alternative power sources or fall-back to existing telephone infrastructure.

Quality of service

When utilising an Ethernet or ADSL home backhaul connection, an Access Point Base Station must either share the backhaul bandwidth with other services, such as Internet Browsing, Gaming Consoles, set-top boxes and triple-play equipment in general, or alternatively directly replace these functions within an integrated unit. In shared-bandwidth approaches, which are the majority of designs currently being developed, the effect on QoS may be an issue.

pectrum accuracy

To meet FCC/RA spectrum mask requirements, Access Point Base Stations must generate the RF signal with a high degree of precision, typically around 50 parts-per-billion (ppb) or better. To do this over a long period of time is a major technical challenge, since meeting this accuracy over a period longer than perhaps 12 months requires an ovenised crystal oscillator (OCXO). These oscillators are generally large and expensive, and still require calibration in the 12-to-24 month time frame. Use of lower-cost temperature-compensated oscillators (TCXO) provides accuracy over only a 6-to-18 month time frame. Both depend on a number of factors.

The solutions to this problem of maintaining accuracy are either to make the units disposable/replaceable after an 18-month period and thus keep the cost of the system low, or to use an external, accurate signal to constantly calibrate the oscillator to ensure it maintains its accuracy. This is not simple (broadband backhaul introduces issues of network jitter/wander and recovered clock accuracy), but technologies such as the IEEE 1588 time synchronisation standard may address the issue, potentially providing 100-nanosecond accuracy (standard deviation), [ [http://ieee1588.nist.gov/distributech_2003_paper.pdf IEEE-1588 Standard for a precision clock synchronization protocol] ] depending on the location of the master clock. Also, Network Time Protocol (NTP) is being pursued by some developers as a possible solution to provide frequency stability. Conventional (macrocell) base stations often use GPS timing for synchronization and this could be used to calibrate the oscillator. [ [http://www.engadget.com/2007/03/28/hands-on-with-the-samsung-ubicell/ Hands on with the Samsung Ubicell] ] However, for a domestic femtocell, there are concerns on cost and the difficulty of ensuring good GPS coverage.

Standards bodies have recognized the challenge of this and the implications on device cost. For example, 3GPP has relaxed the 50ppb precision to 100ppb for indoor base stations in Release 6 and has proposed a further loosening to 250ppb for "Home NodeB" in Release 8.


In order to ensure that the user gets the best data rate out of the system, the mobile appliance must somehow know to connect to the femtocell when within range, even if there is still sufficient signal from, for example, an external macrocell base station. Forcing the mobile appliance to do this, whilst preventing your neighbor's mobile appliance from doing the same, is quite a challenge. In addition, handoff from the femtocell to the wider area macrocell and back again is potentially quite complex.

Air Interfaces

Although much of the commercial focus seems to have been on UMTS, the concept is equally applicable to all air-interfaces. Indeed, the first commercial deployment is the cdma2000 Airave. [ [http://www2.sprint.com/mr/news_dtl.do?id=18000 Sprint Customers in Select Areas of Denver and Indianapolis Get AIRAVE for Enhanced In-Home Coverage ] ] Femtocells are also under development for GSM, TD-SCDMA, WiMAX and LTE. The LTE study groups have identified femtocells ("Home eNode B") as a priority area.


=Home Node B (HNB)=

In May, 2008, the 3GPP completed a feasibility study of femtocell network architectures. Architectures including Cellular Base Station, Collapsed Stack and UMA/GAN were evaluated. As a result, the 3GPP is pursuing a new Home Node B (or HNB) reference architecture which builds on elements from both the Collapsed Stack and UMA/GAN approaches.

As the 3GPP completes the formal standard towards at the end of 2008, vendors and operators will migrate to support this new architecture for 3G femtocells.

Note the 3GPP refers to 3G femtocells as Home Node Bs (HNBs).

Cellular Base Station (Picocell)

One approach for a femtocell is to use the traditional base station architecture. In this case, the femtocell is a base station, connecting to the core network using a standard interface; for example, a WCDMA Node B connecting to a RNC via a backhaul connection (the Iub). The slight difference to a typical base station deployment is that the backhaul would be carried over broadband ("Iub over IP") which may have quality & security concerns. A more significant drawback of this architecture is that standards based base station controllers are designed to support only a limited number of high-capacity base stations, not large numbers of simple ones. This architecture was previously referred to in the literature as a picocell deployment and is one in which a base station controller is introduced to provide the necessary support to the numerous small pico-head base stations.

Collapsed Stack

More common architectures collapse some of the network functionality into the base station ("collapsed stack" or "Base Station Router"), not just the base station itself (Node B or BTS) but also the controller (eg RNC) and enable local radio resource control. This would then connect back to the mobile operator core at a higher point eg Iu interface for WCDMA for central authentication and management. This addresses the scalability concerns above, as the resource is located locally. The original Access Point Base Station followed this architecture but also incorporated the core MSC/GSN functions of authentication, control and switching.

Collapsed Stack with UMA Backhaul

A variant of the above is to use GAN/EGAN Unlicensed Mobile Access (UMA) standards. In this case, the UMA/GAN client is integrated into the femtocell. UMA/GAN protocol provides the connection to the mobile core, tunneling the Iu protocol. This approach uses UMA/GAN's existing security, transport and device management capabilities.

UMA/GAN is an attractive option for operators to leverage their investment in the UMA Network Controller to support applications beyond femtocells, including dual-mode handsets/WiFi or fixed line VoIP with terminal adapters.

The approach for UMA-based femtocells differs from a dual-mode handset approach where the UMA client is integrated in the device. In the former system the terminal is not affected and the air-interface is still standard - the UMA client is incorporated in the femtocell.


The final, and most sophisticated structure is to move to a full IP-based architecture. This approach was utilised in the original Access Point Base Station. In this case, even more functionality is included within the femtocell, and the integration to the core is done using an IP-based technology, e.g. SIP, IMS or H.323.


Currently, the most significant deployment is that of Sprint. This started in 3Q/2007 as a limited rollout (Denver and Indianapolis) of a home-based femtocell built by Samsung Electronics called the Sprint Airave that works with any Sprint handset. [ [http://www2.sprint.com/mr/news_dtl.do?id=18000 Airave] ] As of 17 August 2008, Airave has been rolled out on a nationwide basis.

A number of operators have announced intention to have field trials in 2008, including O2, [ [http://www.o2.com/media/press_releases/press_release_14135.asp O2] ] Softbank, [ [http://www.softbank.co.jp/en/news/release/2007/070629_0002.html Softbank] ] TeliaSonera, [ [http://www.unstrung.com/document.asp?doc_id=143665&f_src=unstrung_gnews TeliaSonera] ] and Vodafone. [ [http://www.eetimes.eu/206800077 Vodafone] ]

Most analysts agree that 2008 will primarily be field trials and soft launch, while commercial launch will be in 2009 [ [http://www.businesswire.com/portal/site/google/?ndmViewId=news_view&newsId=20080505005848&newsLang=en 100,000 Femtocells Will Ship in 2008, But 2010 Will Be the Year of Real Volume, says ABI Research] ] [ [http://www.networkworld.com/newsletters/converg/2008/041408converge2.html Network World: interview with Motorola VP GM Alan Lefkof] ] .


ee also

*Wireless access point

Further reading

* A survey on femtocells: [http://aps.arxiv.org/abs/0803.0952]
* [http://www.airvana.com/products/products_559.htm Airvana femto FAQ]
* [http://www.thinkfemtocell.com/ ThinkFemtocell: Technical detail, business case and analysis]
* [http://news.bbc.co.uk/1/hi/technology/6916125.stm BBC News: Home Cells Signal Mobile Change]
* [http://uk.reuters.com/news/video?videoId=59291&videoChannel=6 Reuters video news about femtocell]
* Dead Link: [http://biz.yahoo.com/prnews/070626/aqtu006.html?.v=21 Netgear and Ubiquisys team to develop femtocell home gateway]
* [http://www.softbank.co.jp/en/news/release/2007/070629_0002.html Japan Softbank (formerly Vodafone Japan) conducts six month field trial with all leading vendors]
* [http://www.mobileeurope.co.uk/news_wire/112796/Yet_another_IP%252F_IMS_femto_cell_release.html Tatara Systems and picoChip partnership to collaborate on femtocell market]
* [http://www.computerworld.com/action/article.do?command=viewArticleBasic&articleId=9027536 Google invests in femtocell vendor]
* [http://www.eetasia.com/ART_8800481182_499488_NT_ae264150.HTM Sequans, PMC-Sierra team on Mobile WiMAX femtocell solution]
* [http://www.theregister.co.uk/2006/11/22/o2_picocell_trial/ O2 trial could see a picocell in every home]
* [http://www.mobileeurope.co.uk/news_wire/112839/Ubiquisys_and_Kineto_successfully_test_UMA_for_femtocells_.html Ubiquisys and Kineto successfully test UMA for femtocells]
* [http://www.picochip.com/press/press_releases/press079 picoChip works with Semtech to enhance femtocell reference designs]
* [http://www.unstrung.com/document.asp?doc_id=128344 "Ubiquisys and Motorola responded to the RFP together, according to one industry source."]
* [http://www1.alcatel-lucent.com/products/productsummary.jsp?productNumber=tcm:228-1303921635 Alcatel-Lucent 9365 Base Station Router Femto]

External links


* [http://www.3waynetworks.com/mobile_prod01.htm 3Way Networks Femtocell] (Now Airvana)
* [http://www.airvananet.com/files/Femto_Overview_Whitepaper_FINAL_12-July-07.pdf Airvana Femtocell]
* [http://www.bbwexchange.com/pubs/2007/03/26/page1393-513355.asp Airwalk Femtocell]
* [http://www.tmcnet.com/usubmit/2007/07/07/2767084.htm Alcatel-Lucent Femtocell]
* [http://www.ericsson.com/ericsson/press/releases/20070209-1103860.shtml Ericsson Femtocell]
* [http://www.haysystems.com/mobile-networks/hsl-femtocell/ HSL 2.75G Femtocell]
* [http://www.mydigitallife.info/2007/07/25/huawei-demonstrated-new-femtocell-prototype-in-japan/ Huawei Femtocell]
* [http://www.ipaccess.com/products/oyster3G.htm ip.access Oyster Femtocell]
* [http://www.kineto.com/products/downloads/wp_UMA_Femto_3GPP_2007.pdf Kineto Femtocell core network solution]
* [http://www.motorola.com/femtocell Motorola Femtocell]
* [http://computerworld.co.nz/news.nsf/tech/16F747624A78774DCC25730F007C4D4C Nokia Siemens Networks' Femtocell]
* [http://www.radioframenetworks.com/americas/products/sseries/sseries.htm RadioFrame Networks Femtocell]
* [http://www.samsung.com/global/business/telecommunication/productInfo.do?ctgry_group=11&ctgry_type=20&b2b_prd_id=201 Samsung Ubicell Femtocell]
* [http://www.ubiquisys.com/ubiquisys2/zonegate.php Ubiquisys Femtocell]
* [http://www.infinetwireless.com InfiNet Wireless Femtocell]
* [http://www.airwalkcom.com/html/news_release.php?press_id=14&]

Chips and reference designs

* [http://www.percello.com Percello: Femtocells silicon vendor]
* [http://www.bitwavesemiconductor.com/news-events/press-releases/pr-launch-20080211.html Bitwave Semiconductor, Programmable 700-3800MHz Radio Transceiver for Femtocells, Handsets & Datacards]
* [http://www.ceva-dsp.com/products/system/ceva-xs1200.php CEVA-XS1200 baseband device: CEVA DSP]
* [http://www.picochip.com/products_and_technology/femtocells_products_PC8208_PC8209_WCDMA Picochip's WCDMA Femtocell Reference design.]
* [http://www.picochip.com/products_and_technology/femtocells_products_PC6530_PC6532_WiMAX Picochip's WiMAX Femtocell Reference design.]
* [http://www.picochip.com/products_and_technology/femtocells_products_CDMA2000_with_GWT Picochip's CDMA2000 Femtocell Reference design.]
* [http://www.pmc-sierra.com/products/details/pm8800/ PMC-Sierra PM8800 WiZIRD 2x2 MIMO WiMAX RF chip]
* [http://www.sequans.com/site/sqn1130.html Sequans SQN1130 WiMAX 802.16e chip]
* [http://www.st.com/stonline/products/literature/bd/11278.pdf ST Microelectronics GreenSIDE STW51000 multi-standard baseband device: DSP + ARM9]
* [http://www.technoconcepts.com/Products/RFD.aspx Terocelo Lycon(TM) RF chipset]
* [http://www.mindspeed.com/web/product/category.html?id=763&trail=562,1039 Mindspeed Comcerto100 Series Broadband Gateway Processors]

Industry body

* [http://www.femtoforum.org Femto Forum]
* [http://www.UMAToday.com UMA Today]

Independent research

* [http://www.soundpartners.com/femtocellpage.aspx Sound Partners Research]


Equipment to chipset mapping

* Airvana ( [http://www.eetimes.com/showArticle.jhtml?articleID=199203187 acquired 3-way Networks] , which was using [http://edageek.com/2007/02/02/3way-picocell-analog-devices-tigersharc/ Analog Devices BlackFin] ) (3GPP2 CDMA 1X unit)
* Airwalk ( [http://www.airwalkcom.com/html/content.php?content_id=38 3GPP2 CDMA 1X unit] )
* Alcatel-Lucent (3GPP UMTS unit) picoChip chipset
* Ericsson (3GPP UMTS WiFi unit)
* GWT (3GPP2 1x + EvDO unit)
* Huawei
* ip.access: [http://voipservices.tmcnet.com/news/2006/09/26/102414.htm Picochip chipset] (3GPP GSM UMTS unit)
* RadioFrame Networks: [http://edageek.com/2007/06/22/radioframe-wireless-ceva/ Structured ASIC using CEVA-X1620(TM) DSP core] (3GPP GSM unit)
* Sagem (3GPP UMTS unit) picoChip chipset
* Samsung ZTE: [http://www.electronicsweekly.com/Articles/2007/09/18/42202/samsung+an+investor+reveals+picochip.htm] (3GPP2 CDMA 1X unit)
* Ubiquisys: [http://www.ubiquisys.com/ubiquisys3/pressreleasesarc.php?id=18 Picochip chipset] (3GPP UMTS unit)

Cellular equipment vendor to femtocell vendor partnerships

* [http://www.unstrung.com/document.asp?doc_id=143834 Cisco <-> ip.access]
* [http://biz.yahoo.com/ap/070917/nokia_siemens_networks_airvana.html?.v=1 Nokia Siemens Networks <-> Airvana] , [http://www.nokiasiemensnetworks.com/global/Press/Press+releases/news-archive/Nokia_Siemens_Networks_and_Ubiquisys_Cooperate_on_3G_Femto_Home_Access_Solution.htm Nokia Siemens Networks <-> Ubiquisys]
* [http://www.unstrung.com/document.asp?doc_id=128344 Motorola <-> Ubiquisys]
* [http://www.lightreading.com/document.asp?doc_id=118232 Thomson <-> ip.access]

Reported market estimates

* [http://www.eetimes.com/news/semi/showArticle.jhtml?articleID=206903201 "Forward Concepts forecasts $4.9 billion femtocell equipment revenue in 2012"]
* [http://www.dri.co.jp/auto/report/abi/abifemt07.htm "36 Million Femtocell Shipments Expected in 2012"]
* [http://www.picochip.com/downloads/WiMAX_Paris%20Feb_07_Femto.pdf "We forecast 17 million residential Femtocells in Western Europe in 2011”]
* [http://www.picochip.com/downloads/WiMAX_Paris%20Feb_07_Femto.pdf “By 2011 there are forecast to be 102 million femtocell users"]
* [http://mobcomment.blogspot.com/feeds/posts/default "3G femtocell deployment to 20% of households by 2012 would only save about USD20 per customer per year, because significant numbers of macrocells would still be needed"]
* [http://www.unstrung.com/document.asp?doc_id=128344 "estimates that there will be 50,000 femtocell units shipped this year and 1 million units next year"]
* [http://news.independent.co.uk/business/news/article2739785.ece "market will be worth $2bn by 2011 "]

Target product and service costs

* [http://www.kinetowireless.com/products/downloads/kineto_wp_UMA_Femto_2007.pdf "Under €150 in volume"]
* [http://www.picochip.com/downloads/WiMAX_Paris%20Feb_07_Femto.pdf "Very aggressive price targets (<<$200)"]
* [http://www2.sprint.com/mr/news_dtl.do?id=18000 Airave unit and service plan costs: $49.95 plus a flat monthly rate for unlimited local and nationwide calling]

Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Femtocell — Dans le monde des télécom, une femtocell (pour femto cellule) est un élément de base du système cellulaire de téléphonie mobile de faible puissance, prévu pour offrir une couverture radio limitée et souvent dédiée pour un usage résidentiel ou en… …   Wikipédia en Français

  • Femtocell — Eine Femtozelle (engl. femto cell) ist eine private UMTS Funkzelle. Sie ist eine kleine Sende und Empfangsstation für UMTS, die in verhältnismäßig kleinen, privaten Bereichen, wie zum Beispiel in der eigenen Wohnung, zum Einsatz kommt und das… …   Deutsch Wikipedia

  • Femtocell — …   Википедия

  • femtocell — noun A wireless communication system, smaller than a picocell, typically designed for use in a home or small business …   Wiktionary

  • femtocell — /ˈfɛmtoʊsɛl/ (say femtohsel) noun a device designed to be plugged into a home broadband or cable line, which directs a mobile phone signal through the internet to a fixed or mobile telephone network. {femto + cell1} …  

  • Mobile data offloading — Mobile data offloading, also called data offloading is the use of complementary network technologies for delivering data originally targeted for cellular networks. Rules triggering the mobile offloading action can either be set by an end user… …   Wikipedia

  • Closed subscriber group — A closed subscriber group (CSG) is a 3GPP term used to describe a limited set of users with connectivity access to a femtocell. When a femtocell is configured in CSG mode, only those users included in the femtocell s access control list are… …   Wikipedia

  • Home Node B — A Home Node B, or HNB, is the 3GPP s term for a 3G femtocell. A Node B is an element of a 3G macro Radio Access Network, or RAN. A femtocell performs many of the function of a Node B, but is optimized for deployment in the home.tandardWithin the… …   Wikipedia

  • Femtocélula — Saltar a navegación, búsqueda En telecomunicaciones, una femtocélula originalmente conocida como Estación Base de Punto de Acceso es un pequeño sistema celular estación base, típicamente diseñado para la realización de despliegues de alta… …   Wikipedia Español

  • Generic Access Network — Unlicensed Mobile Access or UMA, is the commercial name of the 3GPP Generic Access Network, or GAN standard. GAN is a telecommunication system which extends mobile services voice, data and IP Multimedia Subsystem/Session Initiation Protocol… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”