ADAT

s together. While this had been available in earlier machines, ADAT machines were the first to do so with sample-accurate timing - which in effect allowed a studio owner to purchase a 24-track tape machine eight tracks at a time. This capability and its comparatively low cost were largely responsible for the rise of project studios in the 1990s.

"ADAT" is also used as an abbreviation for the ADAT Lightpipe protocol, which transfers 8 tracks in a single fiber optic cable. The ADAT cable standard is no longer strictly tied to ADAT tape machines, and is now utilized by analog-to-digital converters, input cards for digital audio workstations, effects machines, etc. One of the original benefits of utilizing ADAT versus S/PDIF or AES/EBU was that a single cable could carry up to eight channels of audio. (AES10 (MADI) can now carry up to 64 channels.)

Several versions of the ADAT machine were produced. The original ADAT (also known as "Blackface") and the ADAT XT recorded 16 bits per sample (ADAT Type I). A later generation of machines - the XT-20, LX-20 and M-20 - supports 20 bits per sample (ADAT Type II). All ADAT's use the same high quality S-VHS tape media. Tapes formatted in the older Type I style can be read and written in the more modern machines, but not the other way around. Later generations record at two sample rates, the 44.1 kHz and 48 kHz rates commonplace in the audio industry, although the original Blackface could only do 48 kHz. Most (all?) models allow pitch control by varying the sample rate slightly (and tape speed at the same time).

With locate points it was possible to store sample exact positions on tape, making it easy to find specific parts of recordings. Using Auto Play and Auto Record functions made it possible to drop in recording at exact points, rather than relying on human ability to drop in at the right place.

ADAT's could be controlled externally with the Alesis LRC (Little Remote Control), which could be attached to the ADAT with a jack connector, and featured the transport controls and most commonly used functions. Alternatively the BRC (Big Remote Control) could be used, which included many more features which the stand alone ADAT did not have, such as song naming, more locate points and MIDI Time Code synchronisation.

Current Status

ADAT is a professional format, and while it it has been replaced by the computer-based digital audio workstation, it is still used by some in the recording industry. It is also still in use for scientific work, and to drive laser light shows.

ADAT tapes are still available through pro audio retailers with products from Maxell, EMTEC (formerly the tape division of BASF) and HHB. HHB currently is the only company still manufacturing them.

Although it is a tape based format, the term ADAT now refers to its successor, the Alesis ADAT HD24. This is the next step in stand alone digital multitrack audio recorders, and features hard disk recording as opposed to the traditional tape based ADAT, which is now considered obsolete—although computer based recording holds back devices such as the HD24.

See also

* Digital Audio Tape
* Multitrack recording

External links

* [http://www.wikirecording.org/ADAT WikiRecording's ADAT Article]
* [http://web.archive.org/web/19990222055151/alesis.com/alesis/ADAT/adatxt.html DAT-XT™ 8 Track Digital Audio Recorder(alesis.com/web.archive.org)]
* [http://web.archive.org/web/19990422080053/alesis.com/alesis/manuals/index.html manuals(alesis.com/web.archive.org)]