Diamond wire cutting

Diamond wire cutting

Diamond wire cutting (DWC) is the process of using wire of various diameters and lengths, impregnated with diamond dust of various sizes to cut through materials. Because of the hardness of diamonds, this cutting technique can cut through almost any material that is softer than the diamond abrasive. DWC is also practical and less expensive than some other cutting techniques, for example, thin diamond wire only costs around 10-20 cents per foot ($0.7/m) in 2005 for 140 to 500 micrometre diameter wire, to manufacture and sells around $1.25 a foot ($4.10/m) or more, compared to solid diamond impregnated blade cutters costing thousands of dollars. Thus a 1000 foot (300 m) spool of diamond wire costs around 200 dollars to manufacture and sells for around $1,250. Selling cost may vary because of wire grade and demand. Other Diamond Wire cutting can use shaped diamond rings threaded through cables. These larger cables are used to cut concrete and other large projects.


[DWC] produces less kerf and wasted materials compared to solid blades (slurry wire may be similar). On very expensive materials, this could save hundreds or thousands of dollars of waste. Unlike slurry saws that use bare wire and contain the cutting material in the cutting fluid, DWC uses only water or some fluid to lubricate, cool the cut, and remove debris. On some materials DWC may not need water or cutting fluid, thus leaving a clean dry cut.


Using Diamond wire for cutting does have the problem of being less robust (snapping when fatigued, bent, jammed or tangling) than solid cutting blades and possible more dangerous because when the wire breaks and whips, it can cause injury as in the 2007 lawsuit case of a man’s arm being tangled and cut.Fact|date=May 2008 Because of the unique nature of DWC, most saws are expensive and are tailor made to handle Diamond Wire. Commercial saws that utilize solid blades can be augmentented with diamond dust blades and thus may be more economical to operate in some areas. Another problem is when the diamond wire breaks in say, the middle of a 3000 ft (1000 m) reel leaving two 1500 ft (500 m) reels of wire, thus requiring up to twice the saw direction change cycles to do the same cut and wearing out the wire saw and remaining diamond wire quicker. If the diamond wire breaks more towards an end, these shorter pieces (500 feet or less) of wire are practcally unusable and are commonly disposed of due to the hundreds of feet required to thread the saw, leaving little wire to use for process cutting. Because the diamond abrasive is mechanically attached to the wire, the wire loses cutting effectiveness after a few cuts because most of the abrasive is worn off the wire. This means that the last cut may take much longer than the first cut making production timing less predictable. From experience, Diamond Wire lasts around six cuts then either breaks in several places or is functionally worn out. This longevity greatly depends on the material cut and the number of slices per cut. Quality control of smaller diameter diamond wire is also greatly affects wire life and getting a bad batch is not unknown.

External links

* [http://www.diamondwiretech.com/diamond_wire/cut_dia_wire.html Information and Photos on Cutting with Diamond Wire]
* [http://apps.em.doe.gov/ost/pubs/itsrs/itsr2389.pdf Example of DWC by DOE]
* [http://news.bbc.co.uk/1/hi/england/merseyside/7230011.stm Cutting up a WW2 U-boat using DWC]
* [http://www.reliancediamondtools.com/products.htm]

Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Wire saw — A wire saw A wire saw is a machine using a metal wire or cable for cutting. There are two types of wire saw machines: continuous (or endless or loop) and oscillating (or reciprocating). Sometimes the wire itself is referred to as a blade . The… …   Wikipedia

  • Diamond tool — A close up of the segment of a diamond saw blade A diamond tool is a cutting tool with diamond grains fixed on the functional parts of the tool via a bonding material or another method.[1] As diamond is a superhard material, diamond tools have… …   Wikipedia

  • Diamond blade — A close up of a diamond blade, showing worn metal behind the diamonds on the blade. A diamond blade is a saw blade which has diamonds fixed on the blade s base to use the diamonds to cut hard or abrasive materials. There are many types of diamond …   Wikipedia

  • Diamond — This article is about the mineral. For the gemstone, see Diamond (gemstone). For other uses, including the shape ◊, see Diamond (disambiguation) …   Wikipedia

  • Cutting tool (machining) — In the context of machining, a cutting tool (or cutter) is any tool that is used to remove material from the workpiece by means of shear deformation. Cutting may be accomplished by single point or multipoint tools. Single point tools are used in… …   Wikipedia

  • Cutting — For other uses, see Cutting (disambiguation). Different types of scissors sewing (left), paper (middle), kitchen (right) Cutting is the separation of a physical object, or a portion of a physical object, into two portions, through the application …   Wikipedia

  • Diamond flaws — Contents 1 External flaws 1.1 Blemishes 1.2 Scratches 1.3 …   Wikipedia

  • Cutting fluid — Thin wall milling of aluminum using a water based cutting fluid on the milling cutter. Cutting fluid is a type of coolant and lubricant designed specifically for metalworking and machining processes. There are various kinds of cutting fluids,… …   Wikipedia

  • Barbed wire — For other uses, see Barb wire (disambiguation). A close up view of a barbed wire barb …   Wikipedia

  • Oxy-fuel welding and cutting — Oxyacetylene redirects here. For the song, see Cubanate. Side of metal, cut by oxygen propane cutting torch …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”