Gain-switching is a technique in optics by which a laser can be made to produce pulses of light of extremely short duration, of the order of picoseconds (10-12s).

In a semiconductor laser, the optical pulses are generated by injecting a large number of carriers (electrons) into the active region of the device, bringing the carrier density within that region from below to above the lasing threshold. When the carrier density exceeds that value, the ensuing stimulated emission results in the generation of a large number of photons.

However, carriers are depleted as a result of stimulated emission faster than they are injected. So the carrier density eventually falls back to below lasing threshold which results in the termination of the optical output. If carrier injection has not ceased during this period, then the carrier density in the active region can increase once more and the process will repeat itself.

The figure on the right shows a typical pulse generated by gain-switching with a sinusoidal injection current at 250 MHz producing a pulse of approximately 50 ps. Notice the depletion in carrier density during the pulse, and its subsequent rise due to continued current injection giving rise to a smaller secondary pulse.

For solid-state and dye lasers, gain switching (or "synchronous pumping") usually involves the laser gain medium being pumped with another pulsed laser. Since the pump pulses are of short duration, optical gain is only present in the laser for a short time, which results in a pulsed output. Q-switching is more commonly used for producing pulsed output from these types of laser, as pulses with much higher peak power can be achieved.

The term gain-switching derives from the fact that the optical gain is negative when carrier density or pump intensity in the active region of the device is below threshold, and switches to a positive value when carrier density or the pump intensity exceeds the lasing threshold.

ee also


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Q-switching — Q switching, sometimes known as giant pulse formation, is a technique by which a laser can be made to produce a pulsed output beam. The technique allows the production of light pulses with extremely high (gigawatt) peak power, much higher than… …   Wikipedia

  • Party switching in the United States — In United States politics, party switching is any change in party affiliation of a partisan public figure, usually one who is currently holding elected office. In the United States dominant two party system, the switches most commonly occur… …   Wikipedia

  • Variable-gain amplifier — A variable gain or voltage controlled amplifier is an electronic amplifier that varies its gain depending on a control voltage (often abbreviated CV). VCAs have many applications, including audio level compression, synthesizers and amplitude… …   Wikipedia

  • Charles Gain — is a retired police official, who served first as police chief for Oakland, Calif., then as chief in San Francisco in the 1970s. In 1975, Gain was appointed to run the San Francisco Police Department by Mayor George Moscone and served 1975 to… …   Wikipedia

  • Modelocking — Mode locking is a technique in optics by which a laser can be made to produce pulses of light of extremely short duration, on the order of picoseconds (10 12s) or femtoseconds (10 15s).The basis of the technique is to induce a fixed phase… …   Wikipedia

  • Chirped pulse amplification — (CPA) o parámetros ópticos de amplificación de pulso chirpeado (OPCPA), es una técnica para amplificar un pulso de láser ultracorto hasta el nivel del petavatio con el pulso de láser que se extendió temporal y espectralmente antes de la… …   Wikipedia Español

  • List of optical topics — Probably some Wikipedia articles on topics in optics are not yet listed on this page. If you cannot find the topic you are interested in on this page, the article may nonetheless exist; you can try to find it using the Search box, or look in and… …   Wikipedia

  • Regenerative amplification — In laser science, regenerative amplification is a process used to generate short but strong pulses of laser light. See also *Chirped pulse amplification *Optical amplifier *Gain switching *Modelocking *Q switching External links * [http://rp… …   Wikipedia

  • Index of optics articles — Optics is the branch of physics which involves the behavior and properties of light, including its interactions with matter and the construction of instruments that use or detect it.[1] Optics usually describes the behavior of visible,… …   Wikipedia

  • усилитель со ступенчатой регулировкой усиления — Усилитель со ступенчатым переключением коэффициента усиления. [Л.Г.Суменко. Англо русский словарь по информационным технологиям. М.: ГП ЦНИИС, 2003.] Тематики информационные технологии в целом EN step up amplifiergain switching amplifier …   Справочник технического переводчика

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”