Affine curvature

:"This article is about the curvature of affine plane curves, not to be confused with the curvature of an affine connection."Special affine curvature, also known as the equi-affine curvature or affine curvature, is a particular type of curvature that is defined on a plane curve that remains unchanged under a special affine transformation (an affine transformation that preserves area). The curves of constant equi-affine curvature "k" are precisely all non-singular plane conics. Those with "k" > 0 are ellipses, those with "k" = 0 are parabolas, and those with "k" < 0 are hyperbolas.

The usual Euclidean curvature of a curve at a point is the curvature of its osculating circle, the unique circle making second order contact with the curve at the point. In the same way, the special affine curvature of a curve at a point "P" is the special affine curvature of its hyperosculating conic, which is the unique conic making fourth order contact with the curve at "P". In other words it is thelimiting position of the (unique) conic through "P" and four points "P"₁, "P"₂, "P"₃, "P"₄ on the curve, as each of the points approaches "P":

: $P_1,P_2,P_3,P_4 o P.$

In some contexts, the affine curvature refers to a differential invariant κ of the general affine group, which may readily obtained from the special affine curvature "k" by κ = "k"^−3/2d"k"/d"s", where "s" is the special affine arc length. Where the general affine group is not used, the special affine curvature "k" is sometimes (confusingly) also called the affine curvature harv|Shirokov|2001b.

Formal definition

pecial affine arclength

To define the special affine curvature, it is necessary first to define the special affine arclength (also called the equi-affine arclength). Consider an affine plane curve $eta (t)$ . Choose co-ordinates for the affine plane such that the area of the parallelogram spanned by two vectors $a = (a_1, ; a_2)$ and $b = (b_1, ; b_2)$ is given by the determinant

: $detleft [ a; b
ight] = a_{1} b_{2} - a_{2} b_{1}.$

In particular, the determinant: $detegin{bmatrix}frac{deta}{dt} & frac{d^2eta}{dt^2}end{bmatrix}$ is a well-defined invariant of the special affine group, and gives the signed area of the parallelogram spanned by the velocity and acceleration of the curve β. Consider a reparameterization of the curve β, say with a new parameter "s" related to "t" by means of a regular reparameterization "s" = "s"("t"). This determinant undergoes then a transformation of the following sort, by the chain rule:: $egin{align}detegin{bmatrix}frac{deta}{dt} & frac{d^2eta}{dt^2}end{bmatrix} &= detegin{bmatrix}frac{deta}{ds}frac{ds}{dt} & left(frac{d^2eta}{ds^2}left(frac{ds}{dt}
ight)^2+frac{deta}{ds}frac{d^2s}{dt^2}
ight)end{bmatrix}\&=left(frac{ds}{dt}
ight)^3detegin{bmatrix}frac{deta}{ds} & frac{d^2eta}{ds^2}end{bmatrix}.end{align}$ The reparameterization can be chosen so that: $detegin{bmatrix}frac{deta}{ds} & frac{d^2eta}{ds^2}end{bmatrix} = 1$ provided the velocity and acceleration, dβ/d"t" and d²β/d"t"² are linearly independent. Existence and uniqueness of such a parameterization follows by integration:: $s(t) = int_a^tsqrt [3] {detegin{bmatrix}frac{deta}{dt} & frac{d^2eta}{dt^2}end{bmatrix,,dt.$

This integral is called the special affine arclength, and a curve carrying this parameterization is said to be parameterized with respect to its special affine arclength.

pecial affine curvature

Suppose that β("s") is a curve parameterized with its special affine arclength. Then the special affine curvature (or equi-affine curvature) is given by

: $k(s) = detegin{bmatrix}eta"(s) & eta"'(s) end{bmatrix}.$

Here β′ denotes the derivative of β with respect to "s".

: $t mapsto (x(t), y(t)),$

the special affine curvature is:

: $egin{align}k(t)&=frac{x"y$ -xy"}{(x'y"-x"y')^{5/3-frac{1}{2}left [frac{1}{(x'y"-x"y')^{2/3 ight] "\&= frac{4(x"y-xy")+(x'y'-x'y')}{3(x'y"-x"y')^{5/3 -frac{5}{9}frac{(x'y-xy')^2}{(x'y"-x"y')^{8/3end{align}

provided the first and second derivatives of the curve are linearly independent. In the special case of a graph "y" = "y"("x"), these formulas reduce to

: $k=-frac{1}{2}left(frac{1}{(y")^{2/3
ight)"=frac{1}{3}frac{y$ '}{(y")^{5/3-frac{5}{9}frac{(y)^2}{(y")^{8/3

Affine curvature

Suppose as above that β("s") is a curve parameterized by special affine arclength. There are a pair of invariants of the curve that are invariant under the full general affine group harv|Shirokov|2001b — the group of all affine motions of the plane, not just those that are area-preserving. The first of these is

: $sigma = int sqrt{k(s)}, ds,$

sometimes called the "affine arclength" (although this risks confusion with the special affine arclength described above). The second is referred to as the "affine curvature":

: $kappa = frac{1}{k^{3/2 frac{dk}{ds}.$

Conics

Suppose that β("s") is a curve parameterized by special affine arclength with constant affine curvature "k". Let

: $C_eta(s) = egin{bmatrix}eta'(s) & eta"(s)end{bmatrix}.$

Note that det "C"_β, since β is assumed to carry the special affine arclength parameterization, and that

: $k = det(C_eta').,$

It follows from the form of "C"_β that

: $C_eta' = C_etaegin{bmatrix}0&-k\1&0end{bmatrix}.$

By applying a suitable special affine transformation, we can arrange that "C"_β(0) = "I" is the identity matrix. Since "k" is constant, it follows that "C"_β is given by the matrix exponential

: $egin{align}C_eta(s) &= expleft{scdotegin{bmatrix}0&-k\1&0end{bmatrix}
ight}\&=egin{bmatrix}cossqrt{k}s&sqrt{k}sinsqrt{k}s\ -frac{1}{sqrt{ksinsqrt{k}s&cossqrt{k}send{bmatrix}.end{align}$

The three cases are now as follows.

;"k" = 0

If the curvature vanishes identically, then upon passing to a limit,

: $C_eta(s) = egin{bmatrix}1&0\s&1end{bmatrix}$

so β'("s") = (1,s), and so integration gives

: $eta(s)=(s,s^2/2),$

up to an overall constant translation, which is the special affine parameterization of the parabola "y" = "x"²/2.

;"k" > 0

If the special affine curvature is positive, then it follows that

: $eta'(s) = left(cossqrt{k}s,frac{1}{sqrt{ksinsqrt{k}s
ight)$

so that

: $eta(s) = left(frac{1}{sqrt{ksinsqrt{k}s, -frac{1}{k}cossqrt{k}s
ight)$

up to a translation, which is the special affine parameterization of the ellipse "kx"² + "k"²"y"² = 1.

;"k" < 0

If "k" is negative, then the trigonometric functions in "C"_β give way to hyperbolic functions:

: $C_eta(s) =egin{bmatrix}coshsqrts\ frac{1}{sqrtsend{bmatrix}.$

Thus

: $eta(s) = left(frac{1}{sqrtcoshsqrts
ight)$

up to a translation, which is the special affine parameterization of the hyperbola

: $-|k|x^2 + |k|^2y^2 = 1.$

Characterization up to affine congruence

The special affine curvature of an immersed curve is the only (local) invariant of the curve in the following sense:

*If two curves have the same special affine curvature at every point, then one curve is obtained from the other by means of a special affine transformation.

In fact, a slightly stronger statement holds:

*Given any continuous function "k" : ["a","b"] → R, there exists a curve β whose first and second derivatives are linearly independent, such that the special affine curvature of β relative to the special affine parameterization is equal to the given function "k". The curve β is uniquely determined up to a special affine transformation.

This is analogous to the fundamental theorem of curves in the classical Euclidean differential geometry of curves, in which the complete classification of plane curves up to Euclidean motion depends on a single function κ, the curvature of the curve. It follows essentially by applying the Picard-Lindelöf theorem to the system

: $C_eta' = C_etaegin{bmatrix}0&-k\1&0end{bmatrix}$

where "C"_β = [β′ β′′] . An alternative approach, rooted in the theory of moving frames, is to apply the existence of a primitive for the Darboux derivative.

Derivation of the curvature by affine invariance

The special affine curvature can be derived explicitly by techniques of invariant theory. For simplicity, suppose that an affine plane curve is given in the form of a graph "y" = "y"("x"). The special affine group acts on the Cartesian plane via transformations of the form: $egin{align}x&mapsto ax+by + alpha\y&mapsto cx+dy + eta,end{align}$ with "ad" − "bc" = 1. The following vector fields span the Lie algebra of infinitesimal generators of the special affine group:

: $T_1 = partial_x, quad T_2 = partial y$ : $X_1 = xpartial_y, quad X_2 = ypartial_x, quad H=xpartial_x - ypartial_y.$

An affine transformation not only acts on points, but also on the tangent lines to graphs of the form "y" = "y"("x"). That is, there is an action of the special affine group on triples of coordinates

: $(x,y,y').,$

The group action is generated by vector fields: $T_1^{(1)},T_2^{(1)},X_1^{(1)},X_2^{(1)},H^{(1)}$ defined on the space of three variables ("x","y","y"′). These vector fields can be determined by the following two requirements:
* Under the projection onto the "xy"-plane, they must to project to the corresponding original generators of the action $T_1,T_2,X_1,X_2,H$ , respectively.
* The vectors must preserve up to scale the contact structure of the jet space:: $heta_1 = dy - y'dx.$ :Concretely, this means that the generators "X"⁽¹⁾ must satisfy:: $L_{X^{(1) heta_1 equiv 0 pmod{ heta_1}$ :where "L" is the Lie derivative.

Similarly, the action of the group can be extended to the space of any number of derivatives: $(x,y,y',y",dots,y^{(k)}).$ The prolonged vector fields generating the action of the special affine group must then inductively satisfy, for each generator "X" ∈ {"T"₁,"T"₂,"X"₁,"X"₂,"H"}:
* The projection of "X"^(k) onto the space of variables ("x","y","y"′,…,"y"^("k"−1)) is "X"^("k"−1).
* "X"^("k") preserves the contact ideal::: $L_{X^{(k) heta_k equiv 0 pmod{ heta_1,dots, heta_k}$ :where:: $heta_i = dy^{(i-1)} - y^{(i)}dx.$

Carrying out the inductive construction up to order 4 gives

: $T_1^{(4)} = partial_x, quad T_2^{(4)} = partial_y$ : $X_1^{(4)} = xpartial_y + partial_{y'}$ : $egin{align}X_2^{(4)} = ypartial_x&-y'^2partial_{y'}-3y'y"partial_{y"}-(3y"^2+4y'y$ )partial_{y}\&-(10y"y+5y'y')partial_{y""}end{align}: $H^{(4)} = xpartial_x - ypartial_y - 2y'partial_{y'} - 3y"partial_{y"}-4y$ partial_{y}-5y'partial_{y'}.

The special affine curvature: $k=frac{1}{3}frac{y$ '}{(y")^{5/3-frac{5}{9}frac{(y)^2}{(y")^{8/3does not depend explicitly on "x", "y", or "y"′, and so satisfies: $T_1^{(4)}k=T_2^{(4)}k=X_1^{(4)}k=0.$ The vector field "H" acts diagonally as a modified homogeneity operator, and it is readily verified that "H"⁽⁴⁾"k" = 0. Finally,: $X_2^{(4)}k = frac{1}{2} [H,X_1] ^{(4)}k = frac{1}{2} [H^{(4)},X_1^{(4)}] k = 0.$

The five vector fields: $T_1^{(4)},T_2^{(4)},X_1^{(4)},X_2^{(4)},H^{(4)}$ form an involutive distribution on (an open subset of) R⁶ so that, by the Frobenius integration theorem, they integrate locally to give a foliation of R⁶ by five-dimensional leaves. Concretely, each leaf is a local orbit of the special affine group. The function "k" parameterizes these leaves.

ee also

*Affine geometry of curves

References

Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

Affine geometry of curves — In the mathematical field of differential geometry, the affine geometry of curves is the study of curves in an affine space, and specifically the properties of such curves which are invariant under the special affine group In the classical… … Wikipedia
Curvature — In mathematics, curvature refers to any of a number of loosely related concepts in different areas of geometry. Intuitively, curvature is the amount by which a geometric object deviates from being flat, or straight in the case of a line, but this … Wikipedia
Curvature of Riemannian manifolds — In mathematics, specifically differential geometry, the infinitesimal geometry of Riemannian manifolds with dimension at least 3 is too complicated to be described by a single number at a given point. Riemann introduced an abstract and rigorous… … Wikipedia
Curvature form — In differential geometry, the curvature form describes curvature of a connection on a principal bundle. It can be considered as an alternative to or generalization of curvature tensor in Riemannian geometry. Contents 1 Definition 1.1 Curvature… … Wikipedia
Affine connection — An affine connection on the sphere rolls the affine tangent plane from one point to another. As it does so, the point of contact traces out a curve in the plane: the development. In the branch of mathematics called differential geometry, an… … Wikipedia
Affine focal set — In mathematics, and especially affine differential geometry, the affine focal set of a smooth submanifold M embedded in a smooth manifold N is the caustic generated by the affine normal lines. It can be realised as the bifurcation set of a… … Wikipedia
Curvature tensor — In differential geometry, the term curvature tensor may refer to: the Riemann curvature tensor of a Riemannian manifold see also Curvature of Riemannian manifolds; the curvature of an affine connection or covariant derivative (on tensors); the… … Wikipedia
Curvature collineation — A curvature collineation (often abbreviated to CC) is vector field which preserves the Riemann tensor in the sense that, where Rabcd are the components of the Riemann tensor. The set of all smooth curvature collineations forms a Lie algebra under … Wikipedia
Scalar curvature — In Riemannian geometry, the scalar curvature (or Ricci scalar) is the simplest curvature invariant of a Riemannian manifold. To each point on a Riemannian manifold, it assigns a single real number determined by the intrinsic geometry of the… … Wikipedia
Sectional curvature — In Riemannian geometry, the sectional curvature is one of the ways to describe the curvature of Riemannian manifolds. The sectional curvature K(σp) depends on a two dimensional plane σp in the tangent space at p. It is the Gaussian curvature of… … Wikipedia

Academic Dictionaries and Encyclopedias

Affine curvature

Look at other dictionaries:

Share the article and excerpts

Academic Dictionaries and Encyclopedias

Wikipedia

Affine curvature

Look at other dictionaries:

Share the article and excerpts

Direct link