TexSys

[http://pavements.ce.utexas.edu/TexSys/ TexSys] is a web based application serving as a Texas Expert System for the selection of Hot-Mix Asphalt (HMA). TexSys is the product of a Texas Department of Transportation (TxDOT) study, TxDOT Project 0-4824: Guidelines for Selecting Asphalt Mixtures. It considers a number of factors (traffic volume and speed, desired performance characteristics, etc) influencing the selection of HMA and recommends an asphalt mixture based on these. As such it is a tool for inexperienced or young engineers to assist them in selecting the right asphalt mixture for the job.

Manual

The following on-line manual provides a description of the various TexSys input pages. A more detailed explanation of how TexSys works and the underlying algorithms is given in the section #How TexSys works.

Welcome

The welcome page provides an entry point for users to login to the system. Simply click on the "LOGIN" button to enter. The "ABOUT" button opens a window indicating TexSys version information as well as primary authors with e-mail contact addresses.

Login

The login page provides a number of different options. The user can choose to login as a guest or as a registered user. TexSys makes use of weights and ranks in the HMA mixture selection process. If the user opts to register then these weights and ranks can be configured directly by the user. Guests are forced to use the default weights and ranks.

To login as a guest simply click (check) the "Login as guest" box followed by clicking the "LOGIN" button on the bottom of the page. To login as a registered user you must provide a valid "UserName" and "Password". To login as a registered user leave the "Login as guest" box unchecked.

Registering as a new user

If you wish to register as a new user you can click the "Register" button. The registration process requires that you provide a "UserName" in the form of a valid e-mail address as well as a password. The "UserName" in the form of an e-mail address is required so that e-mail contact can be made with the user in case passwords are forgotten, etc.

Forgot your login password?

Not to worry. Click the "Retrieve" button on the Login page. By providing your "UserName" a random password will be e-mailed to you. This password can be changed once the user has logged into TexSys.

General

Once the user has logged into TexSys the first input screen is shown. This screen provides the user with the opportunity to define general information pertaining to the project on which the HMA mixture (to be selected) will be used. The buttons on the gray colored panel of the page may be used for navigation within TexSys and are discussed in the section #Navigating TexSys.

HMA Design Thickness

Input the HMA design thickness obtained from the design engineer in inches. Note that TexSys only uses English or Imperial units. This value represents the total design thickness used by TexSys to adjudicate thicknesses for the asphalt surfacing, intermediate and base layers if required. The design thickness is typically determined using a design tool such as FPS-19. (Author's Note: Provide a reference or link). The design thickness must be between 0.5 and 15 inches.

District/County

Using the drop-down boxes select the district and county within which the HMA mixture will perform. It is really only necessary to select a county but selecting a district first will filter all counties within that district. This information is used to obtain climatic, cost and experience data for a specific district, which is used in the mixture selection process. Both an HMA design thickness and a county selection are necessary before the user can navigate away from the general page.

Construction type

The "New" construction option is selected by default. If the HMA mixture will be used as an overlay then the "Rehab (overlay)" option can be selected instead. Note that if the overlay option is selected, TexSys will check that the design thickness as input is appropriate for overlays i.e. less than 4 inches. Furthermore, overlay selection negates the intermediate and base layer information.

Total quantity (tons)

The default option for total quantity (to be paved) is greater than 5,000 (English) tons. TexSys will consider TxDOT Item 341 asphalt mixtures i.e. QC/QA specification mixtures over TxDOT Item 340 i.e. method specification mixtures, when the total quantity to be paved exceeds 5,000 tons.

Goals

The goals page allows the user to select which asphalt mixtures (goals) should be considered for possible selection in the decision process. All goals are selected by default. The user can deselect or select groups of goals specific to specification Items and layers i.e. surfacing, intermediate or base layers. Intermediate and base layer selections are not available if the user selected an overlay construction design on the #General page.

The final selection of an asphalt mixture is an iterative process. The user may refine mixture selection by navigating through the TexSys input pages. For this reason it is recommended that all goals be selected initially before discarding certain mixtures from the final equation.

Traffic

Traffic volume and speed are important parameters influencing asphalt mixture selection. Select both traffic volume and speed options appropriate for the conditions under which the selected mixture must perform. Default selections are very high volume (> 30 million standard equivalent axle loads or ESALs over the design period) and high speed (> 45 miles per hour).

Roadway category has been grouped with traffic volume as these are closely related. Interstate highways will carry considerably higher volumes of traffic compared to Farm-to-Market roads.

Structural and Functional Requirements

Asphalt mixtures must typically satisfy both structural and functional requirements. Structural aspects include resistance to permanent deformation or rutting and resistance to cracking or fatigue. Function aspects dictate how the "surfacing" mixture will respond or function under specific conditions.

Asphalt mixtures are designed to either resist rutting or fatigue. Given this trade-off, the user must gauge or weight the relative importance of these two requirements. Increasing the weight of one decreases the other and vice versa.

A number of high priority and functional requirements are listed in TexSys although none are selected by default. If the user deems a specific requirement important enough to be accounted for in the mixture selection process it can be selected by clicking the appropriate check box. Multiple selections can be made if desired.

TexSys will always place more emphasis on functional requirements over structural requirements. TexSys checks selections internally to evaluate the logic behind these. For example, the user may weight fatigue resistance highly but also select "High shear resistance" as a requirement. These selections are counter-intuitive. TexSys will therefore negate the structural requirement and rather emphasize the functional requirement as being more important.

While it is desirable that "all" asphalt mixtures exhibit the functional requirements listed in TexSys, certain mixtures consistently perform better or worse than others in specific areas, for example, certain mixtures may have a higher risk of segregation. The following explains in more detail the high priority and functional requirements listed in TexSys:

*Aesthetically pleasing - Some asphalt mixtures look better than others. Consider this option for roads in urban areas that will be in the public's eye.
*Workability - This is a measure of how easily the asphalt mixture can be worked and compacted. Consider this option for mixtures having long haul distances or if manual "hand-labor" is required.
*Resistance to ravelling - Consider this option for low maintenance mixtures, for example on high volume roads where road repair is difficult.
*Resistance to segregation - Segregation results in asphalt mixtures that are rough, tend to ravel and are permeable to water.
*Resistance to moisture damage - May be appropriate for mixes in wet regions.
*Resistance to freeze/thaw damage - May be appropriate for mixes in cold wet regions.
*High shear resistance - Consider this option for mixtures to be used on steep slopes or high volume intersections.
*Long term durability - Consider this option for low maintenance mixtures, for example on high volume roads where road repair is difficult.
*Low noise - Noise generated at the tire-pavement interface can be reduced significantly using certain mixes. Consider this option for high speed roads in residential areas.
*High skid resistance - Of particular importance in high speed wet regions.
*Low splash - Consider for roads in heavily trafficked wet regions.

Pavement Structure

This input page serves two purposes. Based on the user input pavement structure, TexSys will calculate the tensile strain beneath the asphalt layer to determine if the asphalt mixture may be prone to fatigue. It is also used to indicate the nature of the layer underlying the asphalt. To apply these inputs the user must provide layer thickness and modulus values. TexSys will provide rough estimates of the these values. To ignore the influence of these inputs on the mixture selection process check the "Ignore structure" box.

Solution

Having completed all the inputs the user can run TexSys. The inputs are applied to algorithms that weight the relative importance of the inputs and adjudicate a ranking to each of the asphalt mixtures. This ranking is indicated as a fraction between 0 and 1. A higher ranking indicates that the mixture is a better option.

Recommendation

It is left to the user to indicate which mixtures should be considered in the final solution. TexSys will calculate final layer thicknesses based on the mixtures selected

Weights

Navigating TexSys

(Edit this further)

Introduction

[http://pavements.ce.utexas.edu/TexSys/wiki/TM4824-1.pdf Project Survey]

TexSys covers the 4 major HMA types listed in the Department’s 2004 Standard Specification book. The 4 mixture types are:
** Item 340 and 341 – Dense Graded Mixtures
** Item 342 - Permeable Friction Course (PFC)
** Item 344 - Performance Design Mixtures
** Item 346 - Stone Matrix Asphalt (SMA)

TexSys is intended to provide general recommendations based on the experiences of the engineering staff in the Flexible Pavements Branch of TxDOT’s Construction Division. It is not intended to be used as Department policy. Districts are encouraged to make mixture selection choices based on engineering judgment along with the recommendations provided in this guidance document. A number of factors should be considered when selecting which HMA mixture is most appropriate for the intended application. Some of the factors that should be considered include:
** previous experience with similar mixture types
** volume of truck traffic, traffic flow characteristics
** pavement geometric considerations
** lift thickness of paving layers
** condition of underlying pavement
** availability of local materials
** climatic and environmental conditions
** cost (initial as well as life cycle)
** selected performance grade (P.G.) binder

It is important that the designer select the proper mixture for the intended applications. It is also very important the designer select the appropriate PG binder and aggregate properties for the intended application. These topics will not be covered in this document since most TxDOT districts have guidelines or policies currently in place that address binder and aggregate property selection. Those needing additional assistance should contact their district pavement engineer, district construction engineer, laboratory personnel or the Construction Division.

General Description of Hot Mix Asphalt (HMA) Mixtures

Item 340: Dense Graded Mixture (Method Specification)

Description: Item 340 is a method specification for conventional dense graded mixtures.

Typical Use: Item 340 is typically used for projects with small quantities of hot mix asphalt (HMA). Item 340 is generally not recommended for projects with more than 5,000 tons of HMA. Conventional dense graded mixtures can be used for a wide variety of applications; however, under Item 340 it is recommended that the use of dense graded mixtures be limited to miscellaneous applications such as routine maintenance work, backfilling utility cuts, driveways, and other similar applications.

Advantages: The primary advantage of dense graded mixtures compared to other mixtures is lower initial cost. Another advantage is that most contractors and HMA producers are generally familiar with the production and placement of dense graded mixtures. Dense graded mixtures have been used in Texas for over 50 years and have performed well in most applications.

The mixtures listed in Item 340 are identical to those listed in Item 341. In contrast to Item 341, which is a quality control quality assurance (QCQA) specification, Item 340 does not prescribe QCQA measures. This may be an advantage in miscellaneous applications where QCQA measures are not warranted.

Disadvantages: Dense graded mixtures cannot accommodate high asphalt contents without becoming unstable and susceptible to rutting. Relatively low amounts of asphalt are typically used in dense graded mixtures, which in turn makes them more susceptible to cracking and more permeable. Generally speaking, dense graded mixtures can be designed to be either highly rut resistant or highly crack resistant but not both. Dense graded mixtures are not designed to have stone on stone contact. Their strength/stability characteristics are derived primarily from the quality of the intermediate and fine aggregate. Attempting to “coarsen” the mix to allow for more asphalt or to make the mix more rut resistant often has an adverse effect. Coarsening the mix often leads to a dryer mix and one that is more difficult to compact, more permeable and more susceptible to segregation. The texture of dense graded surface mixtures (Type C, D, and F) is relatively low. This can affect wet weather traction depending on the aggregate type, size and mineralogy.

Dense graded mixtures are currently designed with a Texas Gyratory Compactor (TGC). The TGC has a relatively high compactive effort and unlike the Superpave Gyratory Compactor (SGC), the TGC compactive effort can not be varied to match the intended application. Therefore, the TGC tends to produce a dry lean mix regardless of the application. Ideally, one would want to design a richer mix for a low volume/low demand roadway and a leaner mix for a high volume/high demand roadway. More asphalt in the mix reduces the risk of cracking and less asphalt reduces the risk of rutting. It is possible to increase or decrease the amount of asphalt in the mixture by adjusting the target laboratory molded density down or up from the standard value of 96.0%. Seldom is the target lab density adjusted down from the standard of 96.0%; however, it is common practice to adjust the target laboratory molded density up to 97.0% or higher in order to get more asphalt into the mixture. This practice is acceptable and actually encouraged where warranted; however, it should be noted that some mixtures may become susceptible to rutting if they contain too much asphalt especially if the asphalt is relatively soft such a PG 64 -22, etc.

Under Item 340, most of the responsibilities are on the Department rather than the contractor. On projects that warrant QCQA measures be taken, it could be risky to use Item 340 unless the department representatives are familiar with the roles and responsibilities required under method specifications.

Item 341: Dense Graded Mixtures (QC/QA Specification)

Description: Item 341 is a quality control quality assurance (QC/QA) specification for conventional dense graded mixtures.

Typical Use: Dense graded mixtures in Item 341 can be used for a wide variety of applications ranging from new construction to overlays. Dense graded mixtures may be appropriate for applications ranging from high volume (or high demand) roadways to low volume (or low demand) roadways depending on the specified binder grade, aggregate properties, etc. Dense graded mixtures can be used as base, intermediate or surface layers.

Advantages: The primary advantage of dense graded mixtures compared to other mixtures is lower initial cost. Another advantage is that most contractors and HMA producers are generally familiar with the production and placement of dense graded mixtures. Dense graded mixtures have been used in Texas for over 50 years and have performed well in most applications.

The mixtures listed in Item 341 are identical to those listed in Item 340. In contrast to Item 340, which is a method specification, Item 341 prescribes numerous QCQA measures to be taken by both the contractor and the Department. The vast majority of the QCQA measures are the responsibility of the contractor.

Disadvantages: Dense graded mixtures cannot accommodate high asphalt contents without becoming unstable and susceptible to rutting. Relatively low amounts of asphalt are typically used in dense graded mixtures, which in turn makes them more susceptible to cracking and more permeable. Generally speaking, dense graded mixtures can be designed to be either highly rut resistant or highly crack resistant but not both.

Dense graded mixtures are not designed to have stone on stone contact. Their strength/stability characteristics are derived primarily from the quality of the intermediate and fine aggregate. Attempting to “coarsen” the mix to allow for more asphalt or to make the mix more rut resistant often has an adverse effect. Coarsening the mix often leads to a dryer mix and one that is more difficult to compact, more permeable and more susceptible to segregation.

Dense graded mixtures are currently designed with a Texas Gyratory Compactor (TGC). The TGC has a relatively high compactive effort and unlike the Superpave Gyratory Compactor (SGC), the TGC compactive effort can not be varied to match the intended application. Therefore, the TGC tends to produce a dry lean mix regardless of the application. Ideally, one would want to design a richer mix for a low volume/low demand roadway and a leaner mix for a high volume/high demand roadway. More asphalt in the mix reduces the risk of cracking and less asphalt reduces the risk of rutting. It is possible to increase or decrease the amount of asphalt in the mixture by adjusting the target laboratory molded density down or up from the standard value of 96.0%. Seldom is the target lab density adjusted down from the standard of 96.0%; however, it is common practice to adjust the target laboratory molded density up to 97.0% or higher in order to get more asphalt into the mixture. This practice is acceptable and actually encouraged where warranted; however, it should be noted that some mixtures may become susceptible to rutting if they contain too much asphalt especially if the asphalt is relatively soft such a PG 64 -22, etc.

The texture of dense graded surface mixtures (Type C, D, and F) is relatively low. This can affect wet weather traction depending on the aggregate type, size and mineralogy. Under Item 341, there are numerous responsibilities that both the contractor and the Department have in terms of QCQA measures. This degree of control may not be warranted on extremely small projects or miscellaneous type projects.

Item 342: Premeable Friction Courses

Description: Item 342 is a method specification for Permeable Friction Courses (PFC).

Typical Use: PFC mixtures are used as the surface course on high-speed roadways to optimize the safety and comfort characteristics of the roadway. For this guide, a high-speed roadway is defined as one having a posted speed limit of 45 mph or higher. The standard PFC mixture contains PG 76-22 and fibers and is recommended for the vast majority applications where PFC is used. Asphalt Rubber (A-R) PFC can be used as an alternate to the standard PFC. A-R PFC is generally more expensive than the standard PFC; however, it’s unique properties warrant it’s use in certain applications. As a general rule A-R PFC is recommend over the standard PFC when placed as an overlay on an existing concrete pavement, when a high degree of noise reduction is desired and when placed as an overlay on a pavement that has a high amount of cracking. Although both types are excellent at draining water and reducing noise, standard PFC tends to drain water better than the A-R PFC but is generally not considered to be as quite as the A-R PFC.

Advantages: As opposed to all other types of hot mix, PFC is designed to let water drain through the mixture into the underlying layer. PFC mixtures significantly reduce water spray, improve wet weather visibility and visibility of pavement markings, significantly reduce tire noise, and restore ride quality. PFC mixtures have stone on stone contact and relatively high amounts of asphalt binder. As a result, they offer good resistance to rutting and cracking. PFC mixtures are relatively easy to design and place. PFC mixtures require only a minimal amount of compaction with a static roller. This helps facilitate a smooth riding surface. PFC mixtures provide for a roadway that has a uniform yet coarse surface texture. The coarse texture and permeable mix characteristics improve wet weather traction.

PFC mixtures contain approximately 20% air voids and they are typically placed only 1.5 inches thick therefore, the yield per ton of mix is relatively high. PFC weighs approximately 90 to 95 lbs./sy. per inch. as opposed to the standard weight for most hot mix, which is approximately 110 lbs./sy. per inch of depth.

Disadvantages: PFC mixtures typically have a higher initial cost compared to conventional dense graded mixtures. PFC mixtures contain more asphalt (6% min., 8% for min. A-R PFC) compared to conventional mixtures. The asphalt used in PFC mixtures contains a high amount of polymers (or asphalt rubber as an option). In addition to the polymers, PFC mixtures require the use of fibers (not required with asphalt rubber) and may require the use of lime. All of these additives not only add to the initial cost but they sometimes require that the producer make modifications to their typical HMA production processes.

PFC mixtures must be placed on top of a pavement that is structurally sound and relatively impermeable. A surface treatment (under seal) or level-up layer may be needed prior to placing the PFC. When used on low speed roadways, PFC mixtures can clog up more quickly thus negating the beneficial drainage characteristics. PFC mixtures tend to freeze faster and thaw slower (similar to a bridge) compared to conventional mixtures. PFC mixtures are not as resistant to high shearing forces therefore, they should be avoided on pavements where there are hard turning motions combined with braking such as short radius exit ramps, turnouts, etc.Generally speaking, it is not good to place any type of hot mix in cool or cold weather. PFC mixtures can be particularly difficult to place in cool weather because they are placed in thin lifts and they contain a high amount of polymer modified binder. They also do not lend themselves well to applications that require a significant amount of hand work.

Item 344: Performance Design Mixtures

Description: Item 344 is a quality control quality assurance (QC/QA) specification for performance design mixtures which includes traditional Superpave mixtures as well as coarse matrix high binder (CMHB) mixtures.

Typical Use: Although they are typically used on medium to high volume roadways, performance design mixtures may be appropriate for applications ranging from high volume (or high demand) roadways to low volume (or low demand) roadways depending on the specified design number of gyrations (Ndes), binder grade, aggregate properties, etc. Performance design mixtures can be used as base, intermediate or surface layers. Performance design mixtures can be used for a wide variety of applications ranging from new construction to overlays.

Advantages: As compared to Item 341, one of the primary advantages of performance design mixtures is that the mixture design procedures allows one to adjust the binder content (by adjusting the Ndes level) depending on the intended application. For example: a mix for a low volume roadway can be designed with a low Ndes level, which will yield a mixture that is higher in asphalt. The higher asphalt will help mitigate cracking and provided for greater durability. Conversely, a mix for a high volume roadway can be designed with a high Ndes level, which will yield a mixture that is lower in asphalt, thus minimizing rutting.

Another advantage is that performance design mixtures can be designed coarse enough to have stone on stone contact. Achieving stone on stone contact can yield a mix that is highly resistant to rutting and have a coarse surface texture. The coarse surface texture can be beneficial in terms of wet weather traction.

Disadvantages: Compared to regular dense mixtures, performance design mixtures can be more difficult to compact. Failing to achieve proper in-place density can cause potential permeability problems and shorten the performance life of the pavement. In some cases, performance design mixtures can be “too dry” in terms of asphalt content. This can result in a mixture that is susceptible to cracking.

Compared to SMA mixtures, performance design mixtures have a gradation that is not as “gap graded” as an SMA mixture. As a result, performance design mixtures typically contain less asphalt than SMA mixtures and may therefore be more susceptible to cracking and water infiltration.

During compaction, a significant number of Superpave mixtures have experienced a phenomenon known as intermediate temperature tenderness. The mixtures may experience tenderness (or pushing) during compaction. The tenderness does not typically show up until several roller passes have been made and the mat begins to cool (usually in the 240F range). Contractors can overcome this phenomenon by ceasing compaction once the tenderness is observed and then resuming compaction once the mat cools to approximately 180F).

Item 346: Stone Matrix Asphalt Mixtures

Description: Item 346 is a quality control quality assurance (QC/QA) specification for Stone Matrix Asphalt (SMA) mixtures.

Typical use: SMA mixtures are typically used as a surface mix or intermediate layer in the pavement structure on high volume (or high demand) roadways. SMA mixtures are often used as the intermediate layer when PFC mix is used as the surface layer. The standard SMA mixture contains PG 76-22 and fibers and is recommended for the vast majority applications where SMA is used. Asphalt Rubber (A-R) SMA can be used as an alternate to the standard SMA. A-R SMA is generally more expensive than the standard SMA; however, it’s unique properties warrant it’s use in certain applications. As a general rule A-R SMA is recommend over the standard SMA when placed as an overlay on an existing concrete pavement, when a high degree of noise reduction is desired and when placed as an overlay on a pavement that has a high amount of cracking. Advantages: SMA mixtures provide both excellent rut resistance and crack resistance. SMA mixtures have a high concentration of coarse aggregate, which facilitates stone on stone contact. The voids in the coarse aggregate skeleton are filled with fibers, mineral filler, and a relatively high amount (6% minimum) of polymer modified asphalt. This combination of materials allows for a “rich” mixture that is resistant to cracking while at the same time being highly resistant to rutting. SMA mixtures are considered to be relatively impermeable particularly when compared to performance design mixtures. SMA mixtures result in a pavement layer that has a high degree of surface texture which is beneficial in terms of wet weather traction.

Disadvantages: SMA mixtures typically have a higher initial cost compared to other mixtures. SMA mixtures contain more asphalt (6% minimum) compared to conventional mixtures. The asphalt used in SMA mixtures contains a high amount of polymers (or asphalt rubber as an option). In addition to the polymers, SMA mixtures require the use of fibers (not required with asphalt rubber), mineral filler and may require the use of lime. All of these additives not only add to the initial cost but they often require that the producer make modifications to their typical HMA production processes. SMA mixtures may also require higher quality aggregates than conventional mixtures. SMA mixtures usually require a significant compactive effort; however, they also produce a pavement layer with a higher density compared to conventional mixtures. Generally speaking, it is not good to place any type of hot mix in cool or cold weather. SMA mixtures can be particularly difficult to place in cool weather because they are placed in thin lifts and they contain a high amount of polymer modified binder. They also do not lend themselves well to applications that require a significant amount of hand work.

Background

Texas uses a number of different asphalt concrete mixtures for the construction of asphalt roads.

These vary depending on whether the mixture will be used as a surfacing, intermediate or base course layer. The tables below show the different asphalt concrete mixtures included in TxDOT specifications together with recommended minimum and maximum layer thicknesses in inches.

Asphalt surfacing mixtures used in Texas {| border=1 cellspacing=0 cellpadding=5
Asphalt mixture
TxDOT Item
Min. thick. (in.)
Max. thick. (in.)
-
Type C
340/1
2
4
-
Type D
340/1
1.5
3
-
Type F
340/1
1.25
2.5
-
PFC
342
0.75
1.5
-
Superpave Type C
344
1.5
3
-
Superpave Type D
344
1.25
2
-
CMHB Type C
344
2
4
-
CMHB Type F
344
1.5
3
-
SMA Type C
346
2.25
4
-
SMA Type D
346
1.5
3
-
SMA Type F
346
1.25
2.5
-}

Asphalt intermediate layer mixtures used in Texas {| border=1 cellspacing=0 cellpadding=5
Asphalt mixture
TxDOT Item
Min. thick. (in.)
Max. thick. (in.)
-
Type B
340/1
2.5
5
-
Type c
340/1
2
4
-
Superpave Type B
344
2.25
4
-
Superpave Type C
344
1.5
3
-
CMHB Type C
344
2
4
-
SMA Type C
346
2.25
4
-
SMA Type D
346
1.5
3
-}

NotesPorous Friction course (PFC) mixtures can either constitute PG-76 or Asphalt Rubber mixtures.Coarse Matrix High Binder mixtures.Stone Matrix Asphalt Type C and Type F mixtures can constitute Asphalt Rubber binders.

References

# TxDOT (2004), "Standard Specifications for Construction and maintenance of Highways, Streets, and Bridges", Texas Department of Transportation.