Fractional rig

Fractional rig

A fractional rig on a sailing vessel consists of a foresail, such as a jib or genoa sail, that does not reach all the way to the top of the mast.

In the picture to the right, the forestay that secures the mast at the front of the boat is attached to the mast at a lower point and the fore sail (jib or genoa) is rigged to this stay. The mast is farther forward on the boat than on a masthead rig and so it has a larger main sail. Masthead rigs are most common on larger keel boats or cruisers.

A fractional rig is typically used on dinghy sailing boats and racing oriented keel boats, such as the J/24.

Fractional rigs were introduced on race boats in order to allow more controllability of the surface of the main sail and also less drag during tacking.

Usually a fractional rig features a larger main sail and a smaller non-overlapping jib. This configuration is optimized for up-wing sailing efficiency. For downwind sailing, a larger jib is more desirable but in the case of many high-performance fractional rig sailboats, the smaller jib is substituted for a spinnaker or gennaker. On many modern skiffs and race dinghies, the jib is relatively small compared to the size of the main and it is normally left in place when the spinnaker or gennaker is used due to this type of jib minimal aerodynamic interference.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • fractional rig — /ˈfrækʃənəl rɪg/ (say frakshuhnuhl rig) noun a sailing vessel on which the mainsail comprises the largest proportion of the total area of sail used …  

  • Masthead rig — A masthead rig on a sailing vessel consists of a forestay and backstay both attached at the top of the mast.[1] The Bermuda rig can be split into two groups: the masthead rig and the fractional rig. The masthead rig has larger and more headsails …   Wikipedia

  • Bermuda rig — Diagram of a Bermuda or Marconi rig, on a typical monohull sloop. The term Bermuda rig refers to a configuration of mast and rigging for a type of sailboat and is also known as a Marconi rig; this is the typical configuration for most modern… …   Wikipedia

  • Sailboat — A sailboat or sailing boat is a boat propelled partly or entirely by sails. The term covers a variety of boats, larger than small vessels such as sailboards and smaller than sailing ships, but distinctions in size are not strictly defined and… …   Wikipedia

  • Trailer sailer — A trailer sailer is a small yacht or large dinghy style of sailboat that is moved to sailing locations and stored on a road trailer. It is neither a Day sailer or a Pocket cruiser but may be used for either purpose depending upon design… …   Wikipedia

  • Mutineer 15 — Current Specifications Mutineer and barge share the Mississippi River Crew 2 Type Monohull …   Wikipedia

  • Backstay — On a sailing vessel, a backstay is the piece of standing rigging that runs from the mast to the transom of the boat, counteracting the forestay and jib. The backstay is an important sail trim control and has a direct effect on the shape of the… …   Wikipedia

  • Forestay — On a sailing vessel, a forestay, sometimes just called a stay, is a piece of standing rigging which keeps a mast from falling backwards. It is attached either at the very top of the mast, or in fractional rigs between about 1/8 and 1/4 from the… …   Wikipedia

  • Masthead — may refer to: Media the masthead (publishing), a list, usually found on the editorial page of a newspaper or other periodical, listing the publisher, editorial board, advertising rates, etc. a masthead (web design), is a graphic image or text… …   Wikipedia

  • San Juan 21 — The San Juan 21 is a popular one design sailboat featuring a swing keel, normally sailed with a crew of 2 or 3. The San Juan s were made to compete with the Jay Boats as a racer/cruiser but the jay boats were better eventually driving The Clark… …   Wikipedia

Share the article and excerpts

Direct link
… Do a right-click on the link above
and select “Copy Link”