ZX8301

ZX8301

The ZX8301 was a ULA integrated circuit designed for the Sinclair QL microcomputer. Also known as the "Master Chip", it provided a Video Display Generator, the division of a 15 MHz crystal to provide the 7.5 MHz system clock, ZX8302 register address decoder, DRAM refresh and bus controller. The ZX8301 was IC22 on the QL motherboard.

External links

* http://www.worldofspectrum.org/qlfaq/Hardware


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Sinclair QL — Infobox computer Type = Personal computer Released = Start date|1984|01|12 Photo = Discontinued = April 1986 Processor = Motorola 68008 @ 7.5 MHz Memory = 128 KB (640 KB max.) OS = Sinclair QDOSThe Sinclair QL (for Quantum Leap ), was a personal… …   Wikipedia

  • One Per Desk — Merlin Tonto The One Per Desk, or OPD, was an innovative hybrid personal computer/telecommunications terminal based on the hardware of the Sinclair QL. The One Per Desk was built by International Computers Limited (ICL) and launched in the UK in… …   Wikipedia

  • Cycle stealing — This article is about hardware memory operations. For the use of idle CPU time for distributed computation, see CPU scavenging. Cycle stealing is used to describe the stealing of a single CPU cycle, for example, to allow a DMA controller to… …   Wikipedia

  • Sinclair QL — Le Sinclair QL fut le premier ordinateur professionnel de la marque Sinclair. Il succède au ZX80, ZX81 et ZX Spectrum plus orientés vers une utilisation familiale. Commercialisé en 1984, cet ordinateur fut l un des premiers à exploiter la famille …   Wikipédia en Français

  • Sinclair QL — Sinclair QL. El Sinclair QL, (QL por Quantum Leap, salto cuántico), fue un ordenador personal lanzado por Sinclair Research en enero de 1984. Posterior al éxito del ya famoso ZX Spectrum, el QL fue diseñado como el siguiente paso hacia el mercado …   Wikipedia Español

  • Sinclair QL — Тип персональный компьютер Выпущен 12 января 1984 …   Википедия

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”