Uniform Plumbing Code

Uniform Plumbing Code

Designated as an American National Standard, the Uniform Plumbing Code (UPC) is a model code developed by the International Association of Plumbing and Mechanical Officials (IAPMO) to govern the installation and inspection of plumbing systems as a means of promoting the public's health, safety and welfare.

The UPC is developed using the American National Standard Institute's consensus development procedures. This process brings together volunteers representing a variety of viewpoints and interests to achieve consensus on plumbing practices.

The UPC is designed to provide consumers with safe and sanitary plumbing systems while, at the same time, allowing latitude for innovation and new technologies. The public at large is encouraged and invited to participate in IAPMO’s open consensus code development process. This code is updated every three years. A code development timeline and other relevant information are available at IAPMO’s [http://www.iapmo.org Website] .

History

In 1926, a group of Los Angeles plumbing inspectors recognized that there were no uniform requirements for the installation and maintenance of plumbing systems, and at that point in time disease was rampant, a lot of it spread through improper sanitation. Disorder in the industry was the result of widely divergent plumbing practices and the use of many different, often conflicting, plumbing codes by local jurisdictions.

It was these plumbing inspectors that understood the necessity of developing a model code that could be uniformly applied across jurisdictions.

In 1928, the city adopted the first incarnation of a uniform plumbing code developed by the Los Angeles City Plumbing Inspectors Association (LACPIA) and based on the input from a committee of plumbing inspectors, master and journeyman plumbers, and sanitary and mechanical engineers, assisted by public utility companies and the plumbing industry.

The product of this effort, the first edition of the "Uniform Plumbing Code"™ (UPC™) was officially adopted by the Western Plumbing Officials Association in 1945, which later changed its name to IAPMO in 1966 when the scope of the association’s work increased. The widespread use of this code over the past five decades by jurisdictions throughout the United States and internationally is testament to its merit.

With the publication of the 2003 Edition of the "Uniform Plumbing Code", another significant milestone was reached. For the first time in the history of the United States, a plumbing code was developed through a true consensus process. The 2006 edition represents the most current approaches in the plumbing field and is the second edition developed under the ANSI consensus process. Contributions to the content of the code were made by every segment of the built industry, including such diverse interests as consumers, enforcing authorities, installers/maintainers, insurance, labor, manufacturers, research/standards/testing laboratories, special experts and users.

The "2006 Uniform Plumbing Code" [http://www.iapmostore.org/iapmo/shop/index.php?cPath=1] is supported by the American Society of Sanitary Engineering (ASSE), the Mechanical Contractors Association of America (MCAA), the Plumbing-Heating-Cooling Contractors National Association (PHCC-NA), the United Association (UA) and the World Plumbing Council (WPC). These associations support IAPMO’s open consensus process being used to develop IAPMO’s codes and standards.

Content

Chapter 1 — Administration

Chapter 2 — Definitions

Chapter 3 — General Regulations

Chapter 4 — Plumbing Fixtures and Fixture Fittings

Chapter 5 — Water Heaters

Chapter 6 — Water Supply and Distribution

Chapter 7 — Sanitary Drainage

Chapter 8 — Indirect Wastes

Chapter 9 — Vents

Chapter 10 — Traps and Interceptors

Chapter 11 — Storm Drainage

Chapter 12 — Fuel Piping

Chapter 13 — Health Care Facilities and Medical Gas

Chapter 14 — Mandatory Referenced Standards

Chapter 15 — Firestop Protection

Chapter 16 — Gray Water Systems

ee also

* Uniform Mechanical Code
* Uniform Solar Energy Code
* Uniform Swimming Pool, Spa and Hot Tub Code


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Uniform Mechanical Code — Designated as an American National Standard, the Uniform Mechanical Code (UMC) is a model code developed by the International Association of Plumbing and Mechanical Officials (IAPMO) to govern the installation and inspection of mechanical (HVAC,… …   Wikipedia

  • Plumbing — Plumbing, from the Latin plumbum for lead, is the skilled trade of working with pipes, tubing and plumbing fixtures for drinking water systems and the drainage of waste. A plumber is someone who installs or repairs piping systems, plumbing… …   Wikipedia

  • Uniform Swimming Pool, Spa and Hot Tub Code — The Uniform Swimming Pool, Spa and Hot Tub Code is a model code developed by the International Association of Plumbing and Mechanical Officials (IAPMO) to govern the installation and inspection of plumbing systems associated with swimming pools,… …   Wikipedia

  • Uniform Solar Energy Code — The Uniform Solar Energy Code (USEC) is a model code developed by the International Association of Plumbing and Mechanical Officials (IAPMO) to govern the installation and inspection of solar energy systems as a means of promoting the public s… …   Wikipedia

  • Uniform Codes — Codes of practice developed and maintained by IAPMO (the International Association of Plumbing and Mechanical Officials) through an ANSI accredited consensus process working on a three year cycle.The Uniform family of codes consists of:• Uniform… …   Wikipedia

  • International Association of Plumbing and Mechanical Officials — Infobox Union| name= IAPMO country= United States members= full name= International Association of Plumbing and Mechanical Officials native name= founded= 1926 current= head= dissolved date= dissolved state= merged into= office= people= Russ… …   Wikipedia

  • International Building Code — The International Building Code (IBC) is a model building code developed by the International Code Council (ICC). It has been adopted throughout most of the United States. HistorySince the early 1900s, the system of building regulations in the… …   Wikipedia

  • National Electrical Code — The National Electrical Code, 2008 edition The National Electrical Code (NEC), or NFPA 70, is a regionally adoptable standard for the safe installation of electrical wiring and equipment. The NEC, while having no legally binding regulation as… …   Wikipedia

  • IAPMO Green Technical Committee — IAPMO’s (the International Association of Plumbing and Mechanical Officials) leadership in sustainable initiatives predates current trends among other organizations. The Uniform Codes have long included provisions such as water efficient plumbing …   Wikipedia

  • Tap water — Indoor Tap commonly found in the bathroom or kitchen. This tap is a single handle, double spout tap (one spout for hot water, one spout for cold water). Tap water (running water, city water, municipal water, etc.) is a principal component of… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”