Radioisotope piezoelectric generator

A Radioisotope piezoelectric generator converts energy stored in the radioactive material directly into motion to generate electricity by the repeated deformation of a piezoelectric material. This approach creates a high-impedance source and, unlike chemical batteries, the devices will work in a very wide range of temperatures.

Description

A piezoelectric cantilever is mounted directly above a base of the radioactive isotope nickel-63. The Milli-Curie-level nickel-63 thin film generates electrons alone. As the isotope decays, it emits beta particles. As the cantilever accumulates the emitted electrons, it builds up a negative charge at the same time that the isotope film becomes positively charged. The beta particles essentially transfer electronic charge from the thin film to the cantilever. The opposite charges cause the cantilever to bend toward the isotope film. Just as the cantilever touches the thin-film isotope, the charge jumps the gap. That permits current to flow back onto the isotope, equalizing the charge and resetting the cantilever. As long as the isotope is decaying - a process that can last for decades - the tiny cantilever will continue its up-and-down motion. As the cantilever directly generates electricity when deformed, a charge pulse is released each time the cantilever cycles.

Radioactive isotopes can continue to release energy over peri­ods ranging from weeks to decades. The half-life of nickel-63, for example, is over 100 years. Thus, a battery using this iso­tope might continue to supply useful energy for at least half that time. Researchers have demonstrated devices with about 7% efficiency with high duty cycles of 120 Hz to low duty (every three hours) cycle self-reciprocating actuators

See also

*Atomic battery
*Thermionic converter
*Betavoltaics
*Optoelectric nuclear battery
*Radioisotope piezoelectric generator

External links

* [http://www.news.cornell.edu/releases/Oct02/cantilever.ws.html Tiny atomic battery developed at Cornell]